Browsing by Author "Kulenovic, Rudi"

Filter results by typing the first few letters
Now showing 1 - 1 of 1
  • Thumbnail Image
    ItemOpen Access
    Enhancing heat transfer at low temperatures by laser functionalization of the inner surface of metal pipes
    (2024) Holder, Daniel; Peter, Alexander; Kirsch, Marc; Cáceres, Sergio; Weber, Rudolf; Onuseit, Volkher; Kulenovic, Rudi; Starflinger, Jörg; Graf, Thomas
    The latent heat transfer during vapour condensation in the condenser section of passive heat transport devices such as the two-phase closed thermosiphon is limited by film condensation. Dropwise condensation provides an increase of the heat transfer coefficient by up to one order of magnitude and can be achieved with a water-repellant surface. The inner surface of pipes made from stainless steel was functionalized by laser surface texturing with ultrashort laser pulses and subsequent storage in a liquid containing long-chained hydrocarbons. The pipes were separated into half-pipes by wire eroding to enable laser texturing of the inner surface, and were then joined by electron beam welding after laser texturing. As a result, superhydrophobic and water-repellent surfaces with a contact angle of 153° were obtained on the inner surface of the pipes with a length of up to 1 m. The functionalized pipes were used in the condenser section of a two-phase closed thermosiphon to demonstrate a heat transfer rate of 0.92 kW at 45 °C, which is approximately three times the heat transfer rate of 0.31 kW of a smooth reference pipe.