03 Fakultät Chemie
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/4
Browse
5 results
Search Results
Item Open Access High‐performance magnesium‐sulfur batteries based on a sulfurated poly(acrylonitrile) cathode, a borohydride electrolyte, and a high‐surface area magnesium anode(2020) Wang, Peiwen; Trück, Janina; Niesen, Stefan; Kappler, Julian; Küster, Kathrin; Starke, Ulrich; Ziegler, Felix; Hintennach, Andreas; Buchmeiser, Michael R.Post‐lithium‐ion battery technology is considered a key element of future energy storage and management. Apart from high gravimetric and volumetric energy densities, economic, ecologic and safety issues become increasingly important. In that regards, both the anode and cathode materials must be easily available, recyclable, non‐toxic and safe, which renders magnesium‐sulfur (Mg-S) batteries a promising choice. Herein, we present Mg-S cells based on a sulfurated poly(acrylonitrile) composite cathode (SPAN), together with a halogen‐free electrolyte containing both Mg[BH4]2 and Li[BH4] in diglyme and a high‐specific surface area magnesium anode based on Rieke magnesium powder. These cells deliver discharge capacities of 1400 and 800 mAh/gsulfur with >99 % Coulombic efficiency at 0.1 C and 0.5 C, respectively, and are stable over at least 300 cycles. Energy densities are 470 and 400 Wh/kgsulfur at 0.1 C and 0.5 C, respectively. Rate tests carried out between 0.1 C and 2 C demonstrate good rate capability of the cells. Detailed mechanistic studies based on X‐ray photoelectron spectroscopy and electric impedance spectroscopy are presented.Item Open Access Sulfurized polypropylene as low‐cost cathode material for high‐capacity lithium‐sulfur batteries(2022) Du, Qian; Benedikter, Mathis; Küster, Kathrin; Acartürk, Tolga; Starke, Ulrich; Hoslauer, Jean‐Louis; Schleid, Thomas; Buchmeiser, Michael R.Among ‘beyond lithium ion’ energy storage, lithium sulfur (Li-S) batteries are one of the most promising technologies, as a result of the potential for high theoretical energy capacity at low cost. A key obstacle in exploiting the vast potential of Li-S batteries is the formation of soluble polysulfide species. Here, we report sulfurized polypropylene (S/PP‐500) synthesized in one‐step by reacting polypropylene (PP) with sulfur as a new polysulfide shuttle‐free cathode material for Li-S batteries. It exhibits a reversible capacity as high as 1000 mAh/gsulfur at 0.1 C and a sulfur loading of up to 68 wt%, which in turn allows for high sulfur loadings up to 47 % in the final cathode. The low‐cost starting materials together with the simple synthetic procedure and the good electrochemical performance in combination with a commercially available eslectrolyte make the S/PP‐500 a very promising cathode material for Li‐S batteries.Item Open Access Assembling metal organic layer composites for high‐performance electrocatalytic CO2 reduction to formate(2022) Liu, Hang; Wang, Hongguang; Song, Qian; Küster, Kathrin; Starke, Ulrich; Aken, Peter A. van; Klemm, Elias2D metal-organic-framework (MOF) based composites have emerged as promising candidates for electrocatalysis due to their high structural flexibility and fully exposed active sites. Herein, a freestanding metal-organic layer (MOL) with a 2D kgd (kagome dual) lattice was constructed with abundant surface oxygenate groups serving as anchoring sites to immobilize diverse guests. Taking Bi as an example, tetragonal Bi2O3 nanowires can be uniformly grown on MOLs after solvothermal treatment, the structural evolution of which was followed by ex situ electron microscopy. The as-prepared Bi2O3/MOL exhibits excellent CO2 electroreduction activity towards formate reaching a specific current of 2.3 A mgBi−1 and Faradaic efficiencies of over 85 % with a wide potential range from -0.87 to -1.17 V, far surpassing Bi2O3/UiO (a 3D Zr6-oxo based MOF) and Bi2O3/AB (Acetylene Black). Such a post-synthetic modification strategy can be flexibly extended to develop versatile MOL composites, highlighting the superiority of optimizing MOL-based composites for electrocatalysis.Item Open Access Realization of a classical Ruddlesden Popper type bilayer nickelate in Sr3Ni2-xAlxO7-δ with unusual Ni4+(2024) Yilmaz, Hasan; Küster, Kathrin; Starke, Ulrich; Clemens, Oliver; Isobe, Masahiko; Puphal, PascalThe discovery of 80 K superconductivity in bilayer La3Ni2O7 at pressures greater than 14 GPa presents a unique opportunity to study a novel class of high-temperature superconductors. Therefore, other bilayer nickelates following the classical (T4+) Ruddlesden-Popper (RP) series of Sr3Ni2O7 would present an interesting new candidate. In this work, we study the stabilization of RP n = 2 phase in Sr3Ni2-xAlxO7-δ, via floating zone growth of crystals. With powder and single-crystal XRD, we study the stability range of the RP-type phase. Our Thermogravimetric Analysis (TGA), X-ray photoelectron spectroscopy (XPS) and gas extraction studies reveal a remarkably high oxidation state of Ni4+ stabilized by chemical strain from Al. The obtained black crystals are insulating in transport and show a magnetic transition around 12 K.Item Open Access Towards recycling of all‐solid‐state batteries with argyrodite sulfide electrolytes : insights into electrolyte and electrode degradation in dissolution‐based separation processes(2025) Wissel, Kerstin; Hu, Zian; Wu, Xuebin; Jacob, Martine; Küster, Kathrin; Starke, Ulrich; Clemens, OliverAll‐solid‐state Li‐ion batteries (ASSBs) represent a promising leap forward in battery technology, rapidly advancing in development. Among the various solid electrolytes, argyrodite thiophosphates Li6PS5X (X=Cl, Br, I) stand out due to their high ionic conductivity, structural flexibility, and compatibility with a range of electrode materials, making them ideal candidates for efficient and scalable battery applications. However, despite significant performance advancements, the sustainability and recycling of ASSBs remain underexplored, posing a critical challenge for achieving efficient circular processes. This study investigates the dissolution‐based separation and recovery of argyrodite thiophosphate electrolytes and transition metal oxide electrode materials as a potential recycling strategy for ASSBs. A focus is set on the impact of solvent treatments on the recrystallization behavior of these electrolytes. Furthermore, the interactions between dissolved argyrodite thiophosphates and various transition metal oxide electrode materials (LiCoO2, LiMn2O4, LiNi0.8Mn0.1Co0.1O2, LiFePO4 and Li4Ti5O12) is examined to assess their influence on the functional properties of both the electrolytes and electrode materials. Structural, compositional and morphological changes are analyzed using X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, inductively coupled plasma mass spectrometry and X‐ray photoelectron spectroscopy. Our findings provide insights into the complexities of recycling ASSBs, but also highlight the potential for developing efficient, sustainable recycling processes.