03 Fakultät Chemie

Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/4

Browse

Search Results

Now showing 1 - 6 of 6
  • Thumbnail Image
    ItemOpen Access
    High‐performance magnesium‐sulfur batteries based on a sulfurated poly(acrylonitrile) cathode, a borohydride electrolyte, and a high‐surface area magnesium anode
    (2020) Wang, Peiwen; Trück, Janina; Niesen, Stefan; Kappler, Julian; Küster, Kathrin; Starke, Ulrich; Ziegler, Felix; Hintennach, Andreas; Buchmeiser, Michael R.
    Post‐lithium‐ion battery technology is considered a key element of future energy storage and management. Apart from high gravimetric and volumetric energy densities, economic, ecologic and safety issues become increasingly important. In that regards, both the anode and cathode materials must be easily available, recyclable, non‐toxic and safe, which renders magnesium‐sulfur (Mg-S) batteries a promising choice. Herein, we present Mg-S cells based on a sulfurated poly(acrylonitrile) composite cathode (SPAN), together with a halogen‐free electrolyte containing both Mg[BH4]2 and Li[BH4] in diglyme and a high‐specific surface area magnesium anode based on Rieke magnesium powder. These cells deliver discharge capacities of 1400 and 800 mAh/gsulfur with >99 % Coulombic efficiency at 0.1 C and 0.5 C, respectively, and are stable over at least 300 cycles. Energy densities are 470 and 400 Wh/kgsulfur at 0.1 C and 0.5 C, respectively. Rate tests carried out between 0.1 C and 2 C demonstrate good rate capability of the cells. Detailed mechanistic studies based on X‐ray photoelectron spectroscopy and electric impedance spectroscopy are presented.
  • Thumbnail Image
    ItemOpen Access
    In situ electrochemical investigations of inherently chiral 2,2′‐biindole architectures with oligothiophene terminals
    (2021) Malacrida, Claudia; Scapinello, Luca; Cirilli, Roberto; Grecchi, Sara; Penoni, Andrea; Benincori, Tiziana; Ludwigs, Sabine
    The synthesis and characterization of three new inherently chiral N,N′‐dipropyl‐3,3′‐diheteroaryl‐2,2′‐biindole monomers, nicknamed Ind2T4, Ind2T6 and Ind2Ph2T4, which differ in the number of thiophenes as terminals, are reported. In addition to a full monomer characterization, stable electroactive oligomeric films were obtained by electro‐oxidation upon cycling to potentials which activate the thiophene terminals. Cyclic voltammetry, UV‐Vis‐NIR spectroelectrochemistry and in situ conductance measurements show that oligomeric films of Ind2T6 present the best stability and electrochromic switching performance. Enantioselective tests with a chiral ferrocene amine clearly show the potential as chiral selectors for analytical and sensing purposes.
  • Thumbnail Image
    ItemOpen Access
    Towards recycling of LLZO solid electrolyte exemplarily performed on LFP/LLZO/LTO cells
    (2022) Ali Nowroozi, Mohammad; Iqbal Waidha, Aamir; Jacob, Martine; Aken, Peter A. van; Predel, Felicitas; Ensinger, Wolfgang; Clemens, Oliver
    All‐solid‐state lithium ion batteries (ASS‐LIBs) are promising due to their safety and higher energy density as compared to that of conventional LIBs. Over the next few decades, tremendous amounts of spent ASS‐LIBs will reach the end of their cycle life and would require recycling in order to address the waste management issue along with reduced exploitation of rare elements. So far, only very limited studies have been conducted on recycling of ASS‐LIBS. Herein, we investigate the recycling of the Li7La3Zr2O12 (LLZO) solid‐state electrolyte in a LiFePO4/LLZO/Li4Ti5O12 system using a hydrometallurgical approach. Our results show that different concentration of the leaching solutions can significantly influence the final product of the recycling process. However, it was possible to recover relatively pure La2O3 and ZrO2 to re‐synthesize the cubic LLZO phase, whose high purity was confirmed by XRD measurements.
  • Thumbnail Image
    ItemOpen Access
    Insights into the first multi-transition-metal containing Ruddlesden-Popper-type cathode for all-solid-state fluoride ion batteries
    (2024) Vanita, Vanita; Waidha, Aamir Iqbal; Vasala, Sami; Puphal, Pascal; Schoch, Roland; Glatzel, Pieter; Bauer, Matthias; Clemens, Oliver
    Promising cathode materials for fluoride-ion batteries (FIBs) are 3d transition metal containing oxides with Ruddlesden-Popper-type structure. So far, the multi-elemental compositions have not been investigated, but it could alternate the electrochemical performance similar to what has been found for cathode materials for lithium-ion batteries. In this study, we investigate RP type La2Ni0.75Co0.25O4.08 as an intercalation-based active cathode material for all-solid-state FIBs. We determine the structural changes of La2Ni0.75Co0.25O4.08 during fluoride intercalation/de-intercalation by ex situ X-ray diffraction, which showed that F- insertion leads to transformation of the parent phase to three different phases. Changes in the Ni and Co oxidation states and coordination environment were examined by X-ray absorption spectroscopy and magnetic measurements in order to understand the complex reaction behaviour of the phases in detail, showing that the two transition metals behave differently in the charging and discharging process. Under optimized operating conditions, a cycle life of 120 cycles at a critical cut-off capacity of 40 mA h g-1 against Pb/PbF2 was obtained, which is one of the highest observed for intercalation electrode materials in FIBs so far. The average coulombic efficiencies ranged from 85% to 90%. Thus, La2Ni0.75Co0.25O4.08 could be a promising candidate for cycling-stable high-energy cathode materials for all-solid-state FIBs.
  • Thumbnail Image
    ItemOpen Access
    PEMFC anode durability : innovative characterization methods and further insights on OER based reversal tolerance
    (2021) Bentele, Dominik; Aylar, K.; Olsen, K.; Klemm, Elias; Eberhardt, S. H.
    Durability is a major lever for commercial success of proton exchange membrane fuel cells (PEMFCs). The introduction of OER catalyst to the PEMFC anode has been established as a material based mitigation strategy for reversal events caused by gross fuel (i.e. H2) starvation. We investigated the degradation of two different OER based reversal tolerant anodes during short-term recurring reversal operation to mimic field occurrence of reversal events realistically. PEMFC failure during normal operation can be observed whereas OER activity during reversal operation is unaffected. This result is in contrast to findings for commonly applied prolonged reversal accelerated stress tests (ASTs) and indicates an OER catalyst recovery effect for short and recurring reversal events. Combining the developed AST with cyclic voltammetry, electrochemical impedance spectroscopy and hydrogen pump, tests failures during normal operation is mainly assigned to hydrogen oxidation mass transfer increase indicating carbon corrosion and structural change within the anode catalyst layer. Consequently, the developed combination of AST and further characterization methods enables in situ distinction between catalyst and structural degradation, highlighting to be a good basis to investigate future aspects regarding anode degradation caused by cell reversal.
  • Thumbnail Image
    ItemOpen Access
    Aging‐driven composition and distribution changes of electrolyte and graphite anode in 18650‐type Li‐ion batteries
    (2022) Petz, Dominik; Baran, Volodymyr; Peschel, Christoph; Winter, Martin; Nowak, Sascha; Hofmann, Michael; Kostecki, Robert; Niewa, Rainer; Bauer, Michael; Müller‐Buschbaum, Peter; Senyshyn, Anatoliy
    A series of low‐temperature studies on LiNi0.80Co0.15Al0.05O2 18650‐type batteries of high‐energy type with different stabilized states of fatigue is carried out using spatially resolved neutron powder diffraction, infrared/thermal imaging, and quasi‐adiabatic calorimetry. In‐plane distribution of lithium in the graphite anode and frozen electrolyte in fully charged state is determined non‐destructively with neutron diffraction and correlated to the introduced state of fatigue. An independent electrolyte characterization is performed via calorimetry studies on variously aged 18650‐type lithium‐ion batteries, where the shape of the thermodynamic signal is evolving with the state of fatigue of the cells. Analyzing the liquid electrolyte extracted/harvested from the studied cells reveals the decomposition of conducting salt to be the main driving factor for fatigue in the electrolyte degradation.