05 Fakultät Informatik, Elektrotechnik und Informationstechnik
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/6
Browse
Search Results
Item Open Access A high frequency alternating current heater using the advantages of a damped oscillation circuit for low voltage Li-ion batteries(2024) Oehl, Joachim; Gleiter, Andreas; Manka, Daniel; Fill, Alexander; Birke, Kai PeterIn many cases, batteries used in light e-mobility vehicles such as e-bikes and e-scooters do not have an active thermal management system. This poses a challenge when these batteries are stored in sub-zero temperatures and need to be charged. In such cases, it becomes necessary to move the batteries to a warmer location and allow them to acclimatize before charging. However, this is not always feasible, especially for batteries installed permanently in vehicles. In this work, we present an internal high-frequency AC heater for a 48 V battery, which is used for light electric vehicles of EU vehicle classes L1e and L3e-A1 for a power supply of up to 11 kW. We have taken advantage of the features of a damped oscillating circuit to improve the performance of the heater. Additionally, only a small inductor was added to the main current path through a cable with three windings. Furthermore, as the power electronics of the heater is part of the battery main switch, fewer additional parts inside the battery are required and therefore a cost and space reduction compared to other heaters is possible. For the chosen setup we reached a heating rate of up to 2.13 K min -1 and it was possible to raise the battery temperature from -10 °C to 10 °C using only 3.1% of its own usable capacity.Item Open Access A novel long short-term memory approach for online state-of-health identification in lithium-ion battery cells(2024) Kopp, Mike; Fill, Alexander; Ströbel, Marco; Birke, Kai PeterRevolutionary and cost-effective state estimation techniques are crucial for advancing lithium-ion battery technology, especially in mobile applications. Accurate prediction of battery state-of-health (SoH) enhances state-of-charge estimation while providing valuable insights into performance, second-life utility, and safety. While recent machine learning developments show promise in SoH estimation, this paper addresses two challenges. First, many existing approaches depend on predefined charge/discharge cycles with constant current/constant voltage profiles, which limits their suitability for real-world scenarios. Second, pure time series forecasting methods require prior knowledge of the battery’s lifespan in order to formulate predictions within the time series. Our novel hybrid approach overcomes these limitations by classifying the current aging state of the cell rather than tracking the SoH. This is accomplished by analyzing current pulses filtered from authentic drive cycles. Our innovative solution employs a Long Short-Term Memory-based neural network for SoH prediction based on residual capacity, making it well suited for online electric vehicle applications. By overcoming these challenges, our hybrid approach emerges as a reliable alternative for precise SoH estimation in electric vehicle batteries, marking a significant advancement in machine learning-based SoH estimation.Item Open Access Reaction-engineering approach for stable rotating glow-to-arc plasma : key principles of effective gas-conversion processes(2024) Kaufmann, Samuel Jaro; Chinnaraj, Haripriya; Buschmann, Johanna; Rößner, Paul; Birke, Kai PeterThis work presents advancements in a rotating glow-to-arc plasma reactor, designed for stable gas conversion of robust molecules like CO2, N2, and CH4. Plasma-based systems play a critical role in Power-to-X research, offering electrified, sustainable pathways for industrial gas conversion. Here, we scaled the reactor’s power from 200 W to 1.2 kW in a CO2 plasma, which introduced instability due to uplift forces and arc behavior. These were mitigated by integrating silicon carbide (SiC) ceramic foam as a mechanical restriction, significantly enhancing stability by reducing arc movement, confining convection, and balancing volumetric flow within the arc. Using high-speed camera analysis and in situ electronic frequency measurements, we identified dominant frequencies tied to operational parameters, supporting potential in operando monitoring and control. Arc-rotation frequencies from 5 to 50 Hz and higher frequencies (500 to 2700 Hz) related to arc chattering reveal the system’s dynamic response to power and flow changes. Furthermore, refining the specific energy input (SEI) to account for plasma residence time allowed for a more precise calculation of effective SEI, optimizing energy delivery to target molecules. Our findings underscore the reactor’s promise for scalable, efficient gas conversion in sustainable energy applications.Item Open Access Novel approach to diagnose safe electrical power distribution(2024) Braun, Lars; Le, Minh; Motz, Jürgen; Birke, Kai PeterThe integrity of the 12Vdcpower distribution system on a vehicle is essential to guarantee continuous power supply to safety-relevant consumers. Safety-relevant consumers are critical loads, for example, electric power steering, braking systems with functionalities like Anti-Lock Braking or Electronic Stability Control, and autonomous drive systems. To prevent insufficient power supply for safety-relevant consumers due to an increased wiring harness resistance, a novel diagnostic approach is developed to determine the condition of the power distribution, especially the electrical resistance. The influence of measurement errors and bus commutation on the estimation is investigated by using a simulation. By using the diagnostic, a resistance determination in the milliohm range with a standard deviation of σ=0.3mΩcan be achieved under realistic conditions. This ensures that failures in the wiring harness can be identified, avoiding cascading effects and minimizing recalls. Compared to the state of the art, redundancies, costs, and weight can be saved with the proposed diagnostic system based on electrical resistance estimation.Item Open Access Thermal propagation test bench for the study of the Paschen curve and lightning arcs of venting gas(2024) Mulder, Björn; Birke, Kai Peter; Obry, Björn; Wigger, Stefan; Kozakov, Ruslan; Smirnov, Pavel; Schein, JochenThermal propagation events are characterized by fire and thick black smoke, leading to propagation methods with a focus on preventing heat transfer and optimizing gas flow. Yet little attention is being paid to the electric conductivity of the gas, leading to possibly unexpected battery casing openings due to lightning arcs as well as potentially providing the minimum ignition energy. This gas composition (omitting particles) was used at different temperatures and pressures in a lightning arc test bench, leading to the Paschen curve. Using a mini-module cell setup, filtered venting gas was flowed through another lightning arc test bench, allowing for in situ measurements.