05 Fakultät Informatik, Elektrotechnik und Informationstechnik

Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/6

Browse

Filters

2014 - 201972020 - 202215

Settings

Subject: search.filters.subject.004Subject: search.filters.subject.620End date: 2022

Search Results

Now showing 1 - 10 of 22
  • Thumbnail Image
    ItemOpen Access
    Efficient sampling of transition constraints for motion planning under sliding contacts
    (2020) Khoury, Marie Therese
    In contact-based motion planning we consider for humanoid and multiped robots problems like going up a staircase, walking over an uneven surface or climbing a steep hill. Solving such tasks requires finding sequences of fixed and sliding contacts and planning the transition from one contact in the environment to another. However, most existing algorithms do not take sliding contacts into account for navigation problems or consider them only for manipulation scenarios. We propose an approach to contact-based planning that uses sliding contacts and exploits contact transitions. Such transitions are elementary operations required for whole contact sequences. To model sliding contacts, we develop a sliding contact constraint that permits the robot to slide on an object’s surface. To exploit contact transitions, we utilize three constraint modes to enable passage: contact with a start surface, no contact and contact with a goal surface. We develop a sampler that samples these transition modes uniformly. In this thesis we focus on the motion of one robot link’s end from an initial contact point toward a designated goal surface while the other end of the robot remains in sliding contact with the initial surface. Our method is evaluated by testing it on manipulator arms of two, three and seven degrees of freedom with different objects and various sampling-based planning algorithms. From the considered manipulator arm, it would be possible to transfer our concept to more complex robots and scenarios and extend it to a whole sequence of contacts.
  • Thumbnail Image
    ItemOpen Access
    Design and scaling of exoskeleton power units considering load cycles of humans
    (2022) Waldhof, Marcel; Wochner, Isabell; Stollenmaier, Katrin; Parspour, Nejila; Schmitt, Syn
    Exoskeletons are powerful tools for aiding humans with pathological conditions, in dangerous environments or in manually exhausting tasks. Typically, they are designed for specific maximum scenarios without taking into account the diversity of tasks and the individuality of the user. To address this discrepancy, a framework was developed for personalizing an exoskeleton by scaling the components, especially the electrical machine, based on different simulated human muscle forces. The main idea was to scale a numerical arm model based on body mass and height to predict different movements representing both manual labor and daily activities. The predicted torques necessary to produce these movements were then used to generate a load/performance cycle for the power unit design. Considering these torques, main operation points of this load cycle were defined and a reference power unit was scaled and optimized. Therefore, a scalability model for an electrical machine is introduced. This individual adaptation and scaling of the power unit for different users leads to a better performance and a lighter design.
  • Thumbnail Image
    ItemOpen Access
    Sprachassistierter Entwicklungsprozess für automatisierungstechnische Systeme : ein Ansatz zur Strukturierung komplexer Entwicklungsprozesse
    (2020) White, Dustin; Weyrich, Michael
    Der Systementwicklungsprozess nimmt immer mehr an Komplexität zu, da die Systeme selbst immer komplexer werden. Gleichzeitig Vermischen sich die verschiedenen Disziplinen wie Maschinenbau, Elektrotechnik und Softwaretechnik zunehmend, so dass Unternehmen einer Disziplin sprunghafte Komplexitätszuwächse bei ihren Systemen und in ihrer Entwicklung haben. Deshalb wird in dieser Veröffentlichung ein Konzept eines Sprachassistenten erarbeitet, der durch eine Entwicklungsphase führt. Daraus geht hervor, dass die Software zur Unterstützung der Entwicklung ein Informationsmodell benötigt, um die Daten des entwickelten Systems zu speichern und diese mit dem vorhandenen Wissen zu verbinden. Dieses Wissen kann entweder intern oder im Web vorhanden sein. Der Entwicklungsprozess soll daher Kooperation unterstützen, so dass die Assistenzsoftware und Ingenieure miteinander interagieren.
  • Thumbnail Image
    ItemOpen Access
    Distributed cooperative deep transfer learning for industrial image recognition
    (2020) Maschler, Benjamin; Kamm, Simon; Jazdi, Nasser; Weyrich, Michael
    In this paper, a novel light-weight incremental class learning algorithm for live image recognition is presented. It features a dual memory architecture and is capable of learning formerly unknown classes as well as conducting its learning across multiple instances at multiple locations without storing any images. In addition to tests on the ImageNet dataset, a prototype based upon a Raspberry Pi and a webcam is used for further evaluation: The proposed algorithm successfully allows for the performant execution of image classification tasks while learning new classes at several sites simultaneously, thereby enabling its application to various industry use cases, e.g. predictive maintenance or self-optimization.
  • Thumbnail Image
    ItemOpen Access
    Maschinelles Lernen für intelligente Automatisierungssysteme mit dezentraler Datenhaltung am Anwendungsfall Predictive Maintenance
    (2019) Maschler, Benjamin; Jazdi, Nasser; Weyrich, Michael
    Für eine hohe Ergebnisqualität sind Machine Learning Algorithmen auf eine breite Datenbasis angewiesen. Studien zeigen jedoch, dass viele Unternehmen nicht bereit sind, ihre Daten mit anderen Unternehmen, beispielsweise in Form einer gemeinsamen Daten-Cloud, zu teilen. Ziel sollte es daher sein, effizientes maschinelles Lernen mit einer dezentralen Datenhaltung, die den Verbleib vertraulicher Daten im jeweiligen Ursprungs-Unternehmen ermöglicht, zu ermöglichen. In diesem Artikel wird diesbezüglich ein neuartiges Konzept vorgestellt und hinsichtlich seiner Potentiale für intelligente Automatisierungssysteme am Beispiel des Anwendungsfalls Predictive Maintenance analysiert. Die Umsetzbarkeit des Konzepts unter Nutzung verschiedener bestehender Ansätze wird diskutiert, bevor schließlich auf potentielle Mehrwerte für Anlagenbetreiber sowie -hersteller unter besonderer Berücksichtigung der Perspektive kleiner und mittlerer Unternehmen eingegangen wird.
  • Thumbnail Image
    ItemOpen Access
    Deep learning based soft sensors for industrial machinery
    (2020) Maschler, Benjamin; Ganssloser, Sören; Hablizel, Andreas; Weyrich, Michael
    A multitude of high quality, high-resolution data is a cornerstone of the digital services associated with Industry 4.0. However, a great fraction of industrial machinery in use today features only a bare minimum of sensors and retrofitting new ones is expensive if possible at all. Instead, already existing sensors’ data streams could be utilized to virtually ‘measure’ new parameters. In this paper, a deep learning based virtual sensor for estimating a combustion parameter on a large gas engine using only the rotational speed as input is developed and evaluated. The evaluation focusses on the influence of data preprocessing compared to network type and structure regarding the estimation quality.
  • Thumbnail Image
    ItemOpen Access
    Intelligentes Rekonfigurationsmanagement selbstorganisierter Produktionssysteme in der diskreten Fertigung
    (2020) Müller, Timo; Jazdi, Nasser; Weyrich, Michael
    Die Häufigkeit von Änderungen der Produktionsanforderungen nimmt aufgrund wirtschaftlicher Volatilität, kürzerer Innovationszyklen und Produktlebenszyklen kontinuierlich zu. Daher ist eine Vorhersage aller möglichen Ziele eines Produktionssystems zur Entwurfszeit unmöglich und es ergibt sich erhöhter Rekonfigurationsbedarf zur Betriebszeit. Derzeit weist die Rekonfiguration von Produktionssystemen jedoch einige Schwachstellen auf, die in diesem Beitrag aufgezeigt werden. Außerdem wird die Zukunft der industriellen Automatisierung von Cyber-Physischen Produktionssystemen dominiert werden, welche vielversprechende Potentiale bieten. Folglich werden die Cyber-Physischen Produktionssysteme und einige ihrer Potentiale im Hinblick auf Rekonfiguration diskutiert. Um diese theoretischen Potentiale tatsächlich nutzen zu können, sind allerdings entsprechende Konzepte erforderlich, weshalb dieser Forschungsbeitrag ein grundlegendes Konzept für ein selbstorganisiertes Rekonfigurationsmanagement präsentiert.
  • Thumbnail Image
    ItemOpen Access
    Stress-aware periodic test of interconnects
    (2022) Sadeghi-Kohan, Somayeh; Hellebrand, Sybille; Wunderlich, Hans-Joachim
    Safety-critical systems have to follow extremely high dependability requirements as specified in the standards for automotive, air, and space applications. The required high fault coverage at runtime is usually obtained by a combination of concurrent error detection or correction and periodic tests within rather short time intervals. The concurrent scheme ensures the integrity of computed results while the periodic test has to identify potential aging problems and to prevent any fault accumulation which may invalidate the concurrent error detection mechanism. Such periodic built-in self-test (BIST) schemes are already commercialized for memories and for random logic. The paper at hand extends this approach to interconnect structures. A BIST scheme is presented which targets interconnect defects before they will actually affect the system functionality at nominal speed. A BIST schedule is developed which significantly reduces aging caused by electromigration during the lifetime application of the periodic test.
  • Thumbnail Image
    ItemOpen Access
    Whiplash simulation: how muscle modelling and movement interact
    (2022) Millard, Matthew; Siebert, Tobias; Stutzig, Norman; Fehr, Jörg
    Whiplash injury and associated disorders are costly to society and individuals. Accurate simulations of neck movement during car accidents are needed to assess the risk of whiplash injury. Existing simulations indicate that Hill-type muscle models are too compliant, and as a result, predict more neck movement than is observed during in-vivo experiments. Simulating head and neck movement is challenging because many of the neck muscles operate on the descending limb of the force-length curve, a region that Hill-type models inaccurately capture. Hill-type muscle models have negative stiffness on the descending limb of the force-length curve and so develop less force the more they are lengthened. Biological muscle, in contrast, can develop large transient forces during active lengthening and sustain large forces when aggressively lengthened. Recently, a muscle model has been developed that mimics the active impedance of muscle in the short range and can capture the large forces generated during extreme lengthening. In this work, we will compare the accuracy of simulated neck movements, using both a Hill-type model and the model of Millard et al., to the in-vivo neck movement. If successful, the improved accuracy of our simulations will make it possible to predict and help prevent neck injury.
  • Thumbnail Image
    ItemOpen Access
    A network abstraction for control systems
    (2014) Carabelli, Ben W.; Dürr, Frank; Koldehofe, Boris; Rothermel, Kurt
    Networked control systems (NCS), such as the smart power grid, implement feedback control loops by connecting distributed sensors and actuators to a remote controller over a communication network. In order to avoid the costly and time-consuming installation of dedicated networks, NCS can benefit from utilizing readily available IP networks such as the Internet. However, as control systems are typically sensitive to delay and loss, the integration of such systems over best-effort networks becomes a challenge, which we address in this paper with two main contributions. First, we propose an end-to-end transport abstraction for NCS based on a novel probabilistic quality of service specification which (1) is compatible with existing control models and (2) provides the network with application-specific knowledge about the relation between system performance and network-relevant metrics. Second, we realize this abstraction at the network layer with an optimal routing algorithm, which fulfils the required QoS while minimizing the usage of network resources. We show that our approach lends itself to the implementation with state-of-the-art software-defined networking (SDN) technologies, and demonstrate its effectiveness in our evaluation.