06 Fakultät Luft- und Raumfahrttechnik und Geodäsie

Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/7

Browse

Author: search.filters.author.Lutz, ThorstenStart date: 2022End date: 2022

Search Results

Now showing 1 - 3 of 3
  • Thumbnail Image
    ItemOpen Access
    Piloted simulation of the rotorcraft wind turbine wake interaction during hover and transit flights
    (2022) Štrbac, Alexander; Greiwe, Daniel Heinrich; Hoffmann, Frauke; Cormier, Marion; Lutz, Thorsten
    Helicopters are used for offshore wind farms for maintenance and support flights. The number of helicopter operations is increasing with the expansion of offshore wind energy, which stresses the point that the current German regulations have not yet been validated through scientific analysis. A collaborative research project between DLR, the Technical University of Munich, the University of Stuttgart and the University of Tübingen has been conducted to examine the sizes of the flight corridors on offshore wind farms and the lateral safety clearance for helicopter hoist operations at offshore wind turbines. This paper details the results of piloted helicopter simulations in a realistic offshore wind farm scenario. The far-wake of rotating wind turbines and the near-wake of non-rotating wind turbines have been simulated with high-fidelity computational fluid dynamics under realistic turbulent inflow conditions. The resulting flow fields have been processed by superposition during piloted simulations in the research flight simulator AVES to examine the flight corridors in transit flights and the lateral safety clearance in hovering flights. The results suggest a sufficient size for the flight corridor and sufficient lateral safety clearance at the offshore wind turbines in the considered scenarios.
  • Thumbnail Image
    ItemOpen Access
    Aerodynamic and acoustic simulations of thick flatback airfoils employing high order DES methods
    (2022) Bangga, Galih; Seel, Ferdinand; Lutz, Thorsten; Kühn, Timo
    The results of high fidelity aerodynamic and acoustic computations of thick flatback airfoils are reported in the present paper. The studies are conducted on a flatback airfoil having a relative thickness of 30% with the blunt trailing edge thickness of 10% relative to chord. Delayed Detached-Eddy Simulation (DDES) approaches in combination with high order (5th) flux discretization WENO (Weighted Essentially Non-Oscillatory) and Riemann solver are employed. Two variants of the DES length scale calculation methods are compared. The results are validated against experimental data with good accuracy. The studies provide guideline on the mesh and turbulence modeling selection for flatback airfoil simulations. The results indicate that the wake breakdown is strongly influenced by the spanwise resolution of the mesh, which directly contributes to the prediction accuracy especially for drag force and noise emission. The Reynolds normal stress and the Reynolds stress component have the largest contributions on the mixing process, while the contribution of the component is minimal. Proper orthogonal decomposition is further performed to gain deeper insights into the wake characteristics.
  • Thumbnail Image
    ItemOpen Access
    Utilizing high fidelity data into engineering model calculations for accurate wind turbine performance and load assessments under design load cases
    (2022) Bangga, Galih; Parkinson, Steven; Lutz, Thorsten
    Wind turbines often have lower performance and experience higher loading in real operation compared to the original design performance. The reasons stem from the influences of complex atmospheric turbulence, blade contamination, surface imperfection and airfoil-shape changes. Engineering models used for designing wind turbines are limited to information derived from blade sectional datasets, while details on the three-dimensional blade characteristics are not captured. In these studies, a dedicated strategy to improve the prediction accuracy of engineering model calculations will be presented. The main aim is to present an elaborated effort to obtain a better estimate of the turbine loads in realistic operating conditions. The present studies are carried out by carefully utilizing data from high fidelity Computational Fluid Dynamics (CFD) computations into Blade Element Momentum (BEM) and Vortexline methods. The results are in a good agreement with detailed field measurement data of a 2.3 MW turbine. The studies are further extended to a large turbine having a rated power of 10 MW to provide an overview of its suitability for large turbines. Finally, calculations of the wind turbine under a realistic IEC design load case are demonstrated. The studies highlight important considerations for engineering modeling using BEM and Vortexline methods.