01 Fakultät Architektur und Stadtplanung
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/2
Browse
61 results
Search Results
Item Open Access Computational optimisation of urban design models : a systematic literature review(2024) Tay, JingZhi; Ortner, Frederick Peter; Wortmann, Thomas; Aydin, Elif EsraThe densification of urban spaces globally has contributed to a need for design tools supporting the planning of more sustainable, efficient, and liveable cities. Urban Design Optimisation (UDO) responds to this challenge by providing a means to explore many design solutions for a district, evaluate multiple objectives, and make informed selections from many Pareto-efficient solutions. UDO distinguishes itself from other forms of design optimisation by addressing the challenges of incorporating a wide range of planning goals, managing the complex interactions among various urban datasets, and considering the social-technical aspects of urban planning involving multiple stakeholders. Previous reviews focusing on specific topics within UDO do not sufficiently address these challenges. This PRISMA systematic literature review provides an overview of research on topics related to UDO from 2012 to 2022, with articles analysed across seven descriptive categories. This paper presents a discussion on the state-of-the-art and identified gaps present in each of the seven categories. Finally, this paper argues that additional research to improve the socio-technical understanding and usability of UDO would require: (i) methods of optimisation across multiple models, (ii) interfaces that address a multiplicity of stakeholders, (iii) exploration of frameworks for scenario building and backcasting, and (iv) advancing AI applications for UDO, including generalizable surrogates and user preference learning.Item Open Access Environmental impact of a mono-material timber building envelope with enhanced energy performance(2022) Bucklin, Oliver; Di Bari, Roberta; Amtsberg, Felix; Menges, AchimBroader adoption of timber construction is a strategy for reducing negative greenhouse gas (GHG) emissions created by the construction industry. This paper proposes a novel solid timber building envelope that uses computational design and digital fabrication to improve buildings’ energy performance. Timber beams are sawn with deep slits that improve thermal insulation and are milled with various joints for airtight, structural connections. To minimize embedded energy and to simplify disposal, the envelope is assembled without adhesives or metal fasteners. The building envelope is evaluated for thermal resistance and airtightness, and fabrication is evaluated for duration and power output during sawing. Finally, a Lifecycle Assessment (LCA) is carried out. The Global Warming Potential (GWP) is compared to that of other wood envelope systems with similar thermal conductance. Compared to other timber constructions with similar building physics properties, the proposed system showed lower GWP values (-15.63 kg CO2 eq./m² construction). The development and analysis demonstrate the potential to use digitally controlled subtractive manufacturing for improving the quality of solid timber to achieve higher environmental performance in building envelopes. However, further design and fabrication optimizations may be necessary to reduce required materials and production energy.Item Open Access Ein Masterplan zur städtebaulichen Entwicklung der Technischen Universität Dresden(2000) Aminde, Hans-JoachimVom Wissenschaftsrat initiiert, beauftragte die Landesregierung von Sachsen ihre Staatshochbauverwaltung 1992 mit der Erstellung einer Entwicklungskonzeption für die Technische Universität Dresden bis zum Jahr 2010. Das Dresdener Staatshochbauamt II vergab dazu zwei aufeinander bezogene Planungsaufgaben: An unsere Gruppe einen langfristigen Masterplan, um eine räumliche Grundlage für Neubauten und Hochschulerweiterungen zu erhalten, zum Beispiel für dringende auvorhaben oder Bauwettbewerbe. Dieser liegt eine Prognose zukünftiger Studienplatzzahlen des sächsischen Kultus- und Wissenschaftsministeriums zugrunde. Hier ist die personelle,organisatorische sowie bauliche Neuordnung und Erweiterung der Technischen Universität Dresden zur Volluniversität vorgegeben. Die Hochschulinformationssystem GmbH (HIS, Hannover) erhielt den Auftrag zur Ermittlung des Bedarfs an studienplatzbezogenen Neubauflächen. Die Studentenzahl sollte sich von 14.000 (1992) auf etwa 30.000 bis zum Jahre 2010 verdoppeln, im Wintersemester 1999/2000 sind bereits 25.111 Studierende an der TUD eingeschrieben. Voraussetzung für die städtebauliche Entwicklung war die Beantwortung folgender Grundfragen: Welche Gebäudeflächen für wieviele Studierende nach unterschiedlichen Fachrichtungen sind nach Zeitstufen notwendig? Das war die Aufgabe von HIS. Welche Grundstücke und Baulichkeiten stehen der Technischen Universität Dresden nach dem Ende der DDR und der Neuordnung der Eigentumsverhältnisse überhaupt zur Verfügung? Die neu gegründeten Ämter der staatlichen Liegenschaftsverwaltung und das Staatshochbauamt II hatten hier Pionierarbeit zu leisten. Welche baulichen Ressourcen enthält der Gebäudebestand der Universität? Das hat das Staatshochbauamt Dresden II bereits selbst untersucht.Item Open Access BIM for CREM: exploring the benefit of building information modelling for facility management in corporate real estate management(2022) Benn, Maximilian; Stoy, ChristianThe implementation of BIM in FM has been of steadily growing interest for academic research. Yet the benefits of BIM for the FM in CREM have, to the present day, been explored to a limited extent. As research on BIM for FM in CREM remains narrowly investigated, this study follows an exploratory approach to formulate implications for further research directions. Therefore, a four-stage procedure was adopted: (1) identification and definition of BIM uses for FM in CREM; (2) validation of the BIM uses for FM in CREM and the expert survey questionnaire; (3) assessment of each BIM use’s benefit by experts; and (4) analysis of the correlations between BIM uses’ benefit assessments and the respondents’ industries, the resulting associations, and the prioritisation for the development of BIM uses for FM in CREM. Based on that methodology, it was shown that the BIM use for FM in CREM with the highest priority for development is 46 Facilities and Equipment: Repair and Renewal. The BIM use with the lowest priority is 21 Visualisation. As a result, four implications on the development of BIM uses for FM in CREM were formulated regarding case studies, information requirements, and technical requirements, as well as process and personnel requirements.Item Open Access Tensegrity FlaxSeat : exploring the application of unidirectional natural fiber biocomposite profiles in a tensegrity configuration as a concept for architectural applications(2024) Renner, Markus; Spyridonos, Evgenia; Dahy, HanaaMaterial selection is crucial for advancing sustainability in the building sector. While composites have become popular, biocomposites play a pivotal role in raising awareness of materials deriving from biomass resources. This study presents a new linear biocomposite profile, fabricated using pultrusion technology, a continuous process for producing endless fiber-reinforced composites with consistent cross-sections. The developed profiles are made from flax fibers and a plant-based resin. This paper focuses on the application of these profiles in tensegrity systems, which combine compression and tension elements to achieve equilibrium. In this study, the biocomposite profiles were used as compression elements, leveraging their properties. The methods include geometrical development using physical and digital models to optimize the geometry based on material properties and dimensions. A parametric algorithm including physics simulations was developed for this purpose. Further investigations explore material options for tension members and connections, as well as assembly processes. The results include several prototypes on different scales. Initially, the basic tensegrity principle was built and explored. The lessons learned were applied in a final prototype of 1.5 m on a furniture scale, specifically a chair, integrating a hanging membrane serving as a seat. This structure validates the developed system, proving the feasibility of employing biocomposite profiles in tensegrity configurations. Furthermore, considerations for scaling up the systems to an architectural level are discussed, highlighting the potential to enhance sustainability through the use of renewable and eco-friendly building materials, while promoting tensegrity design applications.Item Open Access Application of natural fibre pultruded profiles in diverse lightweight structures and architectural scenarios(2024) Spyridonos, Evgenia; Dahy, HanaaReevaluating the materials that shape our built environment holds significant importance for sustainable construction. This research introduces newly developed natural fibre pultruded profiles, composed of flax fibres and bio-resin, customised for specific properties and targeted applications. Engineered to withstand both bending and compression loads, these profiles have been subjected to rigorous mechanical testing to demonstrate their compression and flexural strength, as well as flexibility. The emphasis lies on the bottom-up design approach, guiding the creation of applications suitable for this innovative material in various lightweight structures. The paper presents a series of case studies showcasing the use of biocomposite profiles in diverse design and structural contexts. The initial focus was on active-bending structures, highlighting the material’s flexibility, showcased at a ten-metre span structure, the first large-scale demonstrator. However, given the material’s versatile properties, it is suitable for a wide range of other applications. Key case studies discussed include reciprocal, tensegrity and deployable structures, as well as modular planar or space frame systems. These profiles offer a sustainable and versatile alternative to traditional materials and composites, providing innovative and eco-friendly construction solutions while contributing to industry sustainability goals.Item Open Access Multi-objective optimization of a folding photovoltaic-integrated light shelf using non-dominated sorting genetic algorithm III for enhanced daylighting and energy savings in office buildings(2025) Cheraghzad, Tanin; Zamani, Zahra; Hakimazari, Mohammad; Norouzi, Masoud; Karimi, AlirezaThis study developed a novel folding light shelf system that integrates reflectors, photovoltaic (PV) modules, and adaptive louvers that adjust based on solar altitude, aiming to improve daylight distribution, minimize glare, and reduce energy consumption in office buildings. The research employed an advanced optimization approach, utilizing Non-dominated Sorting Genetic Algorithm III (NSGA-III) and Latin Hypercube Sampling, a highly effective method suitable for managing complex multi-objective scenarios involving numerous variables, to efficiently identify high-performance configurations with increased precision. Key design variables across all three components of the system included angle, width, distance, and the number of folds in the light shelf, along with the number of louvers. The proposed method successfully integrates PV technology into light shelves without compromising their functionality, enabling both daylight control and energy generation. The optimization results demonstrate that the system achieved up to a 15% improvement in useful daylight illuminance (UDI) and a 16% reduction in cooling energy consumption. Furthermore, the PV modules generated 509.5 kWh/year, ensuring improved efficiency and sustainability in building performance.Item Open Access Structural optimization through biomimetic-inspired material-specific application of plant-based natural fiber-reinforced polymer composites (NFRP) for future sustainable lightweight architecture(2020) Sippach, Timo; Dahy, Hanaa; Uhlig, Kai; Grisin, Benjamin; Carosella, Stefan; Middendorf, PeterUnder normal conditions, the cross-sections of reinforced concrete in classic skeleton construction systems are often only partially loaded. This contributes to non-sustainable construction solutions due to an excess of material use. Novel cross-disciplinary workflows linking architects, engineers, material scientists and manufacturers could offer alternative means for more sustainable architectural applications with extra lightweight solutions. Through material-specific use of plant-based Natural Fiber-Reinforced Polymer Composites (NFRP), also named Biocomposites, a high-performance lightweight structure with topology optimized cross-sections has been here developed. The closed life cycle of NFRPs promotes sustainability in construction through energy recovery of the quickly generative biomass-based materials. The cooperative design resulted in a development that were verified through a 1:10 demonstrator, whose fibrous morphology was defined by biomimetically-inspired orthotropic tectonics, generated with by the fiber path optimization software tools, namely EdoStructure and EdoPath in combination with the appliance of the digital additive manufacturing technique: Tailored Fiber Placement (TFP).Item Open Access Towards sustainable urbanization in new cities : social acceptance and preferences of agricultural and solar energy systems(2024) Marzouk, Mai A.; Salheen, Mohamed A.; Fischer, Leonie K.Social acceptance of end users is indispensable for the implementation of agricultural and solar energy systems to create a more sustainable and productive residential building sector. Thus, the main aim of this study is to investigate the social acceptance level of the two systems and the implementation preferences of Egyptian end users, i.e., residents, in relation to their different sociocultural backgrounds. Given that most of the construction in Egypt is taking place in new cities, the acceptance of such systems strongly relates to societal implications for urban sustainability. An online survey was therefore disseminated to the residents of new cities in the Greater Cairo Region in Egypt (n = 274). A contingency analysis was conducted using the SPSS tool, calculating the Chisquared and Fisher tests to identify significant associations between the variables. Results indicated a high level of social acceptance of both the agricultural (71 %) and solar energy (64 %) systems. The attitude of residents towards the systems and their experience using them were the variables exhibiting the highest association with social acceptance of agricultural systems (p < 0.001 for attitude and experience) and solar energy systems (p = 0.04 for attitude and p = 0.002 for experience). The most preferred system types were the horizontal planters on hand railings and roof-mounted photovoltaics. Responses showed that production was the main aim for agricultural systems, while economic returns were the main aim for solar systems. However, both systems faced the same barriers, especially in relation to economic barriers. Out of the 12 sociocultural variables tested, respondents’ age had the most significant impact on the implementation preferences of both systems followed by gender, residence type, and access to shared facilities. Our study addressed a knowledge gap by comparing the two systems to identify the common or different reasons behind the disparity between their high theoretical potential versus low on-ground implementation. Future research could investigate other underlying factors behind social acceptance beyond the analyzed sociocultural aspects and tackle the types of each system in detail.Item Open Access Mycostructures : growth-driven fabrication processes for architectural elements from mycelium composites(2022) Biala, Eliza; Ostermann, MartinThe paper discusses how characteristics of the mycelium growth process - namely different growth effectiveness depending on the nutrition content of the substrate, gradual solidification of the inoculated substrate, and bio-welding - can be a driving force for developing sustainable biofabrication processes of mycelium based composites (MBC) for architectural application. To explore this potential one-semester (12 weeks) seminar and one block seminar (2 weeks) with master-level students were held at the University of Stuttgart, and independent work within the Institute IBK2 was performed. The free experimentation with fabrication tactics resulted in the emergence of different investigation paths, tested with small-scale demonstrators, from which the most interesting three this paper presents in detail. The first is the two-phase printing process of mycelium substrate and subsidiary reusable support materials. It applied tests with the small, inorganic, loose substances (plastic pellets) extractable mechanically and meltable substances (wax) extracted by heating. The second path of investigation followed lost formworks created from hemp strings positioned inside the material. Finally, the third path is a particular case of lost formwork approach utilizing different tubular bandages stuffed with MBC and utilizing it later as a thick filament for other different form-giving deposition practices: layering, hanging, braiding, and knotting. All three investigation paths prove feasible, although their upscaling potential correlates strongly with the successful automation of the processes using CNC machines, which could provide the precision and sterility needed for this highly heterogenous and sensitive material. In addition, further developments in the material cultivation protocols are indispensable to provide a higher repetition of the results.