01 Fakultät Architektur und Stadtplanung
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/2
Browse
43 results
Search Results
Item Open Access Computational optimisation of urban design models : a systematic literature review(2024) Tay, JingZhi; Ortner, Frederick Peter; Wortmann, Thomas; Aydin, Elif EsraThe densification of urban spaces globally has contributed to a need for design tools supporting the planning of more sustainable, efficient, and liveable cities. Urban Design Optimisation (UDO) responds to this challenge by providing a means to explore many design solutions for a district, evaluate multiple objectives, and make informed selections from many Pareto-efficient solutions. UDO distinguishes itself from other forms of design optimisation by addressing the challenges of incorporating a wide range of planning goals, managing the complex interactions among various urban datasets, and considering the social-technical aspects of urban planning involving multiple stakeholders. Previous reviews focusing on specific topics within UDO do not sufficiently address these challenges. This PRISMA systematic literature review provides an overview of research on topics related to UDO from 2012 to 2022, with articles analysed across seven descriptive categories. This paper presents a discussion on the state-of-the-art and identified gaps present in each of the seven categories. Finally, this paper argues that additional research to improve the socio-technical understanding and usability of UDO would require: (i) methods of optimisation across multiple models, (ii) interfaces that address a multiplicity of stakeholders, (iii) exploration of frameworks for scenario building and backcasting, and (iv) advancing AI applications for UDO, including generalizable surrogates and user preference learning.Item Open Access Tensegrity FlaxSeat : exploring the application of unidirectional natural fiber biocomposite profiles in a tensegrity configuration as a concept for architectural applications(2024) Renner, Markus; Spyridonos, Evgenia; Dahy, HanaaMaterial selection is crucial for advancing sustainability in the building sector. While composites have become popular, biocomposites play a pivotal role in raising awareness of materials deriving from biomass resources. This study presents a new linear biocomposite profile, fabricated using pultrusion technology, a continuous process for producing endless fiber-reinforced composites with consistent cross-sections. The developed profiles are made from flax fibers and a plant-based resin. This paper focuses on the application of these profiles in tensegrity systems, which combine compression and tension elements to achieve equilibrium. In this study, the biocomposite profiles were used as compression elements, leveraging their properties. The methods include geometrical development using physical and digital models to optimize the geometry based on material properties and dimensions. A parametric algorithm including physics simulations was developed for this purpose. Further investigations explore material options for tension members and connections, as well as assembly processes. The results include several prototypes on different scales. Initially, the basic tensegrity principle was built and explored. The lessons learned were applied in a final prototype of 1.5 m on a furniture scale, specifically a chair, integrating a hanging membrane serving as a seat. This structure validates the developed system, proving the feasibility of employing biocomposite profiles in tensegrity configurations. Furthermore, considerations for scaling up the systems to an architectural level are discussed, highlighting the potential to enhance sustainability through the use of renewable and eco-friendly building materials, while promoting tensegrity design applications.Item Open Access Application of natural fibre pultruded profiles in diverse lightweight structures and architectural scenarios(2024) Spyridonos, Evgenia; Dahy, HanaaReevaluating the materials that shape our built environment holds significant importance for sustainable construction. This research introduces newly developed natural fibre pultruded profiles, composed of flax fibres and bio-resin, customised for specific properties and targeted applications. Engineered to withstand both bending and compression loads, these profiles have been subjected to rigorous mechanical testing to demonstrate their compression and flexural strength, as well as flexibility. The emphasis lies on the bottom-up design approach, guiding the creation of applications suitable for this innovative material in various lightweight structures. The paper presents a series of case studies showcasing the use of biocomposite profiles in diverse design and structural contexts. The initial focus was on active-bending structures, highlighting the material’s flexibility, showcased at a ten-metre span structure, the first large-scale demonstrator. However, given the material’s versatile properties, it is suitable for a wide range of other applications. Key case studies discussed include reciprocal, tensegrity and deployable structures, as well as modular planar or space frame systems. These profiles offer a sustainable and versatile alternative to traditional materials and composites, providing innovative and eco-friendly construction solutions while contributing to industry sustainability goals.Item Open Access Multi-objective optimization of a folding photovoltaic-integrated light shelf using non-dominated sorting genetic algorithm III for enhanced daylighting and energy savings in office buildings(2025) Cheraghzad, Tanin; Zamani, Zahra; Hakimazari, Mohammad; Norouzi, Masoud; Karimi, AlirezaThis study developed a novel folding light shelf system that integrates reflectors, photovoltaic (PV) modules, and adaptive louvers that adjust based on solar altitude, aiming to improve daylight distribution, minimize glare, and reduce energy consumption in office buildings. The research employed an advanced optimization approach, utilizing Non-dominated Sorting Genetic Algorithm III (NSGA-III) and Latin Hypercube Sampling, a highly effective method suitable for managing complex multi-objective scenarios involving numerous variables, to efficiently identify high-performance configurations with increased precision. Key design variables across all three components of the system included angle, width, distance, and the number of folds in the light shelf, along with the number of louvers. The proposed method successfully integrates PV technology into light shelves without compromising their functionality, enabling both daylight control and energy generation. The optimization results demonstrate that the system achieved up to a 15% improvement in useful daylight illuminance (UDI) and a 16% reduction in cooling energy consumption. Furthermore, the PV modules generated 509.5 kWh/year, ensuring improved efficiency and sustainability in building performance.Item Open Access Towards sustainable urbanization in new cities : social acceptance and preferences of agricultural and solar energy systems(2024) Marzouk, Mai A.; Salheen, Mohamed A.; Fischer, Leonie K.Social acceptance of end users is indispensable for the implementation of agricultural and solar energy systems to create a more sustainable and productive residential building sector. Thus, the main aim of this study is to investigate the social acceptance level of the two systems and the implementation preferences of Egyptian end users, i.e., residents, in relation to their different sociocultural backgrounds. Given that most of the construction in Egypt is taking place in new cities, the acceptance of such systems strongly relates to societal implications for urban sustainability. An online survey was therefore disseminated to the residents of new cities in the Greater Cairo Region in Egypt (n = 274). A contingency analysis was conducted using the SPSS tool, calculating the Chisquared and Fisher tests to identify significant associations between the variables. Results indicated a high level of social acceptance of both the agricultural (71 %) and solar energy (64 %) systems. The attitude of residents towards the systems and their experience using them were the variables exhibiting the highest association with social acceptance of agricultural systems (p < 0.001 for attitude and experience) and solar energy systems (p = 0.04 for attitude and p = 0.002 for experience). The most preferred system types were the horizontal planters on hand railings and roof-mounted photovoltaics. Responses showed that production was the main aim for agricultural systems, while economic returns were the main aim for solar systems. However, both systems faced the same barriers, especially in relation to economic barriers. Out of the 12 sociocultural variables tested, respondents’ age had the most significant impact on the implementation preferences of both systems followed by gender, residence type, and access to shared facilities. Our study addressed a knowledge gap by comparing the two systems to identify the common or different reasons behind the disparity between their high theoretical potential versus low on-ground implementation. Future research could investigate other underlying factors behind social acceptance beyond the analyzed sociocultural aspects and tackle the types of each system in detail.Item Open Access Delta IXI: deployable structure with flax fibre pultruded profiles for architectural applications : case studies in furniture and adaptive facade systems(2025) Courarie-Delage, Indiana; Spyridonos, Evgenia; Dahy, HanaaMaterial selection is essential for advancing sustainability in construction. Biocomposites contribute significantly to raising the awareness of materials derived from biomass. This paper explores the design development and application of novel natural fibre pultruded biocomposite profiles in a deployable system. Development methods include geometrical studies to create a system that transforms from flat to three-dimensional. Physical and digital models were used to refine the geometry, while connection elements were designed to suit material properties and deployability requirements. The first case study, at a furniture scale, demonstrates the use of the profiles connected using threading methods to create a lightweight multifunctional deployable system enabling easy transport and storage. This system can be locked at various heights for different purposes. The realised structure weighs 4 kg, supporting weights up to 150 kg. The second case study applies the system architecturally in an adaptive kinetic facade, adjusting to the sun’s position for optimal shading, providing up to 70% daylight when open and as little as 20% when closed. These two structures validate the developed deployable system, showcasing the versatility of biocomposite profiles in such configurations. This approach enhances sustainability in architecture by enabling lightweight, adaptable, and eco-friendly building solutions.Item Open Access Integrating the SDGs into urban renewal practices : recommendations from participatory SDG monitoring in Stuttgart‐Münster(2025) Busch, Sigrid; Franck, Marlene; Ley, AstridItem Open Access Assessing the thermal storage potential of timber and hybrid activated slabs : a simulation-based comparison of different construction types(2025) Agner, Andrea; Österreicher, DorisThermally activated building systems (TABS) rely on high thermal mass materials, such as concrete, which perform well thermally but have a high carbon footprint. This study systematically investigates the thermal behavior of bio-based materials - spruce, pine, beech, and oak - in TABS using numerical simulations, comparing them with conventional and hybrid materials like concrete and clay. A total of 120 variants were simulated with different pipe diameters, spacing, embedment depths, and inlet temperatures. Thermal properties, particularly thermal conductivity and specific heat capacity, significantly influenced component activation efficiency. Concrete exhibited a characteristic cooling time of 71 h at an inlet temperature of 26 °C (pipe diameter 16 mm), while pine reached 80 h under the same conditions. The use of capillary tube mats extended the cooling times to 75 h for concrete and 92 h for pine. Although concrete provides the best thermal performance, certain bio-based materials achieve comparable results under optimized conditions. Hybrid systems with mineral components offer additional potential for improvement. These findings demonstrate that ecologically sustainable component activation using bio-based materials is feasible with only moderate efficiency losses compared to mineral-based systems, provided system parameters are appropriately adapted.Item Open Access Fibrx rocking chair : design and application of tailored timber as an embedded frame for natural fibre-reinforced polymer (NFRP) coreless winding(2023) Pittiglio, Alexandra; Simpson, Ailey; Costalonga Martins, Vanessa; Dahy, HanaaThe building industry needs to innovate towards a more sustainable future and can do so through a combination of more renewable material choices and less wasteful fabrication processes. To address these issues, a hybrid material and fabrication system was developed using laminated timber veneer and natural fibre-reinforced composites (NFRPs), two materials that are leveraged for their potential of strategic material placement in additive processes towards programmed material behaviour and performance. The main contribution is in the hybrid fabrication approach, using thin, bent laminated veneer as an embedded frame for coreless filament winding of NFRP, which removes the need for temporary, wasteful formwork that is typically required to achieve structurally performative bent timber or FRP elements. Integrative methods are developed for the design, simulation, and fabrication of a rocking chair prototype that illustrates the architectural potential of the developed fabrication approach.Item Open Access Embracing failures : empowering user interventions in robotic prefabrication with augmented reality(2025) Yang, Xiliu; Amtsberg, Felix; Menges, AchimThis paper presents a method for multi-human-robot collaborative timber construction using a head-mounted augmented reality system as the main facilitator. The AR system enables workers to visualise the construction tasks and intervene in otherwise automated robotic processes through task and motion control functions on the AR headset. To validate the method, we invited ten carpenters to participate in a dual-human-robot wall assembly case study. Each pair of workers worked together with a heavy-payload industrial robot, during which pre-planned errors were triggered, prompting them to utilise the AR interface to resolve these errors. The multi-user setup emulated construction environments that involve multiple humans, and the system incorporated real-time and asymmetrical visualisations of the tasks, robot and human partners to support multi-actor collaboration. The study demonstrates the potential of AR in connecting and empowering human workers in semi-automated prefabrication and construction processes. It presents new strategies to supervise, control and adjust otherwise stringent constraints of automated fabrication workflows, enabling experienced workers direct control over robotic motion and multi-actor prefabrication.