Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
Item Open Access 3rd International Symposium on Connections between Steel and Concrete : Stuttgart, Germany, 27th - 29th September 2017 ; proceedings(Stuttgart : Institute of Construction Materials, University of Stuttgart, 2017) Sharma, Akanshu; Hofmann, JanSteel is an integral part of any concrete construction either in the form of anchors connecting structural/non-structural components to the structure or in the form of reinforcement embedded in concrete or sometimes as a part of steel-concrete composite construction. To ensure structural integrity, it is essential to form a reliable connection between steel and concrete. The anchorage must serve its function well to ensure the interaction between the components connected to the structure and the structure itself. The bond between reinforcement and concrete must be ensured to maintain the required flow of forces from concrete to steel and vice-versa. The concrete and steel structural members must be able to interact with each other in a desired way. If the connection between steel and concrete loses its integrity, the integrity of the entire structure comes in jeopardy. In order to ensure the integrity of connections between steel and concrete, it is required to (i) investigate their behavior through high quality experiments, (ii) evaluate their performance with advanced and reliable computational methods, and (iii) summarize them in practical and reliable design rules and models to be used by engineers and practitioners. Although connections between steel and concrete are used ever since the commencement of reinforced concrete construction, there are several aspects which are yet to be fully understood. Advancement in technologies lead to development of new products such as post-installed anchors, anchor channels, high strength reinforcing bars etc., whose performance in concrete need to be investigated. New concrete based materials such as high performance concrete, fiber reinforced concrete, geopolymer concrete etc. are being developed and their compatibility with the steel components and rebar must be verified. The interaction between structure and the anchorages or concrete and steel structure connected through anchorages need to be understood. Innovative fastening solutions between steel and concrete components are being developed for which reliable design models are needed. Furthermore, several general design issues, e.g. anchorages with supplementary reinforcement, fatigue behavior of anchors, long term performance of bonded anchors, anchor channels under different loading combinations, harmonization of design between post-installed and cast-in place reinforcing bars, influence of corrosion on performance of anchorages and reinforcement etc. need in-depth investigations. In addition, globally, structures are exposed to natural and man-made hazards more than ever, which induce extreme loads on the structural components, e.g. earthquakes, fire, impact and combinations thereof. The performance of existing structures against such hazards has exposed several inherent weaknesses in the past. Often, the performance of structures under such hazards is significantly influenced by the performance of connections between steel and concrete. Since the loads induced in the structures by such hazards cannot be reliably estimated and also since under such loads, compatibility requirements between different components result in additional demands on different components, the designs can only be reliably done following a performance based design approach. Similar approaches must also be developed for the design of connections between steel and concrete to ensure a reliable performance from the connections and in turn from the structures against extreme hazards. One of the most important applications of anchorages is in strengthening of structures for connecting the strengthening element and the parent structure. Every strengthening needs a certain type of anchorage and the performance of the strengthening depends largely on the performance of the anchorage itself. The demands posed on the anchorages used in strengthening (e.g. seismic strengthening) could be very challenging, which includes high forces, large crack widths, combined load and crack cycling, limited area and depth to develop the required resistance etc. In order to ensure the safety of structures, therefore, it is essential to develop innovative strengthening methods along with anchorage techniques that would allow the strengthening to serve its desired function. The 3rd International Symposium on Connections between Steel and Concrete (ConSC2017) aims at bringing the experts from around the globe working in the field of steel-concrete connections to share and discuss the current state-of-the-art as well as the possible future directions to improve the safety of structures by making reliable connections between steel and concrete. The previous two symposia were held in Stuttgart in 2001 and 2007. This symposium offers a platform for the academicians, researchers, industry, regulatory authorities, practicing engineers and students to share the knowledge gained through a decade of research and development. With more than 120 high quality research papers along with the keynote addresses and invited lectures from the renowned experts, this symposium is a significant step forward towards the enhancement of knowledge as well as to provide food for thought for the forthcoming research in the field of connections between steel and concrete.Item Open Access 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : proceedings ; a conference under the auspice of the German Association for Computational Mechanics (GACM) ; 11 - 13 October 2017, Stuttgart, Germany(Stuttgart : Institute for Structural Mechanics, University of Stuttgart, 2017) Scheven, Malte von; Keip, Marc-André; Karajan, NilsThis book contains papers presented at the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry (GACM 2017), which was held 11-13 October 2017 at the University of Stuttgart, Germany. The colloquium is hosted by the Institute for Structural Mechanics and the Institute of Applied Mechanics of the University of Stuttgart in collaboration with DYNAmore GmbH. The objective of GACM 2017 is to bring together young scientists who are engaged in academic and industrial research on Computational Mechanics and Computer Methods in Applied Sciences. It provides a platform to present and discuss recent results from research efforts and industrial applications. In more than 200 presentations by young scientists in 18 mini-symposia devoted to specific scientific areas and thematically arranged contributed sessions, current scientific developments and advances in engineering practice in this field are presented and discussed. The contributions from young researchers are supplemented by plenary lectures from three senior scientists from academia and industry as well as from the GACM Best PhD Award winners 2015 and 2016.Item Open Access Alles nur geklaut? : Innovationsfähigkeit im Kontext von Technologietransfer und Industriespionage : Tagungsband zum Symposium an der Universität Stuttgart, 26.-27.02.2015, Historisches Institut - Wirkungsgeschichte der Technik(2018) Schuetz, Thomas; Seyffer, David; Petersen, Sonja; Könnicke, Danny; Stadlbauer, Jana; Dittmann, Frank; Jacob, Frank; Heine, Eike-Christian; Schuetz, Thomas; Seyffer, DavidItem Open Access Ansprüche an die Siedlungswasserwirtschaft - Kernaufgaben versus weitergehende Anforderungen(Essen : Vulkan-Verlag GmbH, 2019) Eberlein, Joachim; Baumann, Peter; Kreuzinger, Norbert; Anders, Gereon; Böhm, Bernhard; Marthaler, Roland; Dittmer, Ulrich; Alt, Klaus; Barnscheidt, Inge; Reichert, Andreas; Vossler, Johann; Schönberger, Harald; Meyer, Carsten; Krauß, ManuelDie Herausforderungen an die Kommunalabwasserbehandlung steigen immer weiter: Mikroschadstoffeliminierung, Nährstoffrückgewinnung, Abwasserdesinfektion, Energieeffizienzsteigerung und vielleicht auch in naher Zukunft die Mikroplastikentfernung. Daneben besteht nach wie vor die klassische Aufgabe der Eliminierung von Kohlenstoff- und Nährstoffverbindungen, an die auch immer höhere Ansprüche gestellt werden. Wie können die Abwasseranlagenbetreiber all diese Aufgaben meistern? Müssen aus Sicht des Gewässerschutzes Prioritäten gesetzt werden? Welche Betriebserfahrungen gibt es mit neuartigen Technologien? Stehen die weitergehenden Anforderungen in Konkurrenz zu den bisherigen Kernaufgaben oder können Synergien sowohl bei der Technologie als auch im Betrieb entstehen?Item Open Access Eine ARCHE zur Rettung digitalen Kulturguts : Stuttgarter Kolloquium des ARCHE-Projekts am 27. Juni 2006(2006) Maier, Gerald; Riedel, Wolfgang; Wendel, Klaus; Gubler, David; Stephan, Werner (Einführungsvortrag); Schwitin, Wladimir (Technische Vorführungen)Im Rahmen des ARCHE-Projektes wurde vom Fraunhofer Institut für Physikalische Messtechnik in Zusammenarbeit mit der Firma MicroArchive Systems, dem Landesarchiv Baden-Württemberg, der Universitätsbibliothek Stuttgart und anderen Partnern ein Laserbelichter entwickelt, welcher es erlaubt, digitale Bilddaten mit sehr hoher Genauigkeit und Farbtreue auf alterungsbeständigem Farbmikrofilm zu speichern. Zum erfolgreichen Abschluß des Projektes fand unter dem Titel 'Eine ARCHE zur Rettung digitalen Kulturguts' am 27. Juni 2006, von 13:30 bis 16:30 Uhr, im Vortragssaal der Universitätsbibliothek Stuttgart ein Abschluß-Kolloquium statt. Erörtert wurden u.a. die Technik und Entwicklung des ArchiveLaser®s, das ARCHE-System zur Kombination von Bildformaten mit Metadaten auf Mikrofilm, sowie die Anwendung der Technologie in Archiven, Bibliotheken und Museen.Item Open Access Baden-Württemberg - Erneuerung einer Industrieregion : Kolloquium zum Andenken an Prof. Dr. Hans-Joachim Braczyk(2001) Fuchs, Gerhard (Hrsg.); Töpsch, Karin (Hrsg.)Professor Dr. Hans-Joachim Braczyk, Vorstandsmitglied der Akademie für Technikfolgenabschätzung in Baden-Württemberg, verstarb am 30. November 1999 im Alter von 57 Jahren. Mit dem Kolloquium „Baden-Württemberg – Erneuerung einer Industrieregion“, das in dieser Publikation dokumentiert wird, wollte die TA-Akademie seine Leistungen als Leiter des Bereichs „Technik, Organisation, Arbeit“ würdigen und an sein umfangreiches wissenschaftliches Werk anknüpfen. In den Beiträgen für das Kolloquium wurden zum einen Überlegungen und Ergebnisse aus Projekten vorgestellt, die Herr Professor Braczyk im Rahmen seiner Tätigkeit an der TA-Akademie konzipiert und geleitet hat. Zum anderen werden Ansatzpunkte für künftige Arbeiten des Bereiches aufgezeigt, insbesondere im Zusammenhang mit der Entwicklung zur Wissens- und Informationsgesellschaft. In den Band wurde auch ein bisher unveröffentlichter Beitrag von Professor Braczyk mit aufgenommen, der wichtige konzeptionelle Weichenstellungen für Forschungsarbeiten im Bereich „Technik, Organisation, Arbeit“ enthält. Der Beitrag wurde für die Veröffentlichung nicht überarbeitet und trägt daher noch seinen ursprünglichen Vortragscharakter. Die von Professor Braczyk initiierten und geleiteten Forschungsarbeiten gingen von der Prämisse aus, dass die Entwicklungen auf dem Arbeitsmarkt, in der Wirtschaftsstruktur und in den industriellen Beziehungen sich wechselseitig bedingen und verändern. Diese Prämisse hat in der Konzeption des Themenfeldes „Innovationen für Wirtschaft, Arbeit und Beschäftigung“ seinen Niederschlag gefunden, dessen Arbeitsergebnisse wichtige Beiträge zur aktuellen Diskussion um die Veränderungen der Erwerbsarbeit zu Beginn des 21. Jahrhunderts beisteuern.Item Open Access Berichte der Fachtagung Baustatik - Baupraxis 14 : 23. und 24. März 2020, Universität Stuttgart(Stuttgart : Institut für Baustatik und Baudynamik, Universität Stuttgart, 2020) Bischoff, Manfred; Scheven, Malte von; Oesterle, BastianItem Open Access Bond in concrete - bond, anchorage, detailing : 5th International Conference : Stuttgart, Germany, 25th - 27th July 2022 : proceedings(Stuttgart : Institute of Construction Materials, University of Stuttgart, 2022) Hofmann, Jan; Plizzari, GiovanniAlthough concrete and reinforced concrete structures are not considered particularly sustainable, concrete is one of the most important and widely used building material in the world. Structures such as bridges, power plants or tunnels would be inconceivable without reinforced concrete as a building material. The bond between reinforcement and concrete is an essential factor for achieving the desired response from these different reinforced concrete structures. Moreover, bond plays an important role not only in reinforced concrete structures, but also for strengthening and rehabilitation of structures. Due to the necessity of sustainable building methods and need to reduce the spending of resources, the rehabilitation of structures will play an important role in shaping the sustainable future. In addition, our building materials are changing quite rapidly. This applies not only to concrete, but also to reinforcement. Carbon concrete, extreme lightweight or printed concrete, glass fibre or textile reinforcement are just a few examples. Their properties are significantly different from the previously known materials. In combination this can lead to a completely changed bond behavior, which can no longer be described using the existing models. Consequently, this becomes a challenge for all of us working in this field since results and solutions are expected faster than in the past. Therefore, it is important to have a platform that enables exchange of information on the latest results and future development and is also essential to publish and share the findings with the research community. However, this is not the only motivation for organising the Bond in Concrete Conference. The personal exchange and the development of a social network is an additional motivation, which is becoming more and more essential for both work and successful research. The previous conferences in Paisley (1982), Riga (1992), Budapest (2002) and Brescia (2012) are excellent examples for personal and professional networking. This tradition is something we want to continue in Stuttgart (2022) and use this opportunity to enable, encourage and support interdisciplinary research on “bond”. Looking at the recent developments, the description of the bond models and the underlying theories have been further improved and refined in the last few years. As a result, a larger number of influencing factors and loading conditions are considered for describing and quantifying “bond”. Today we know much more about bond than we did 50 years before. But we still don´t know enough about “bond”, it is important to continue and intensive research in the future. Despite all the adversities, uncertainties, injustices and challenges that our society will have to handle in the upcoming years and decades, I am convinced that each one of us is doing their best to make our future worth living. The 5th Conference on “Bond in Concrete" may contribute to this objective.Item Open Access Chemikalienmanagement und Umweltschutz in der textilen Kette(München : DIV Deutscher Industrieverlag GmbH, 2017) Krist, Helmut; Schäfer, Thomas; Marzinkowski, Joachim M.; Schönberger, Harald; Bayer, Andreas; Förster, Johannes; Schmid, Matthias; Kohla, Monika; Seidel, Stefan D.; Minke, Ralf; Schönberger, HaraldDie Bekleidung als Grundbedürfnis des Menschen wird heute global in sehr komplexen Lieferketten hergestellt. Nach der Ernährung, dem privaten Transport und dem Wohnen hat die Textilproduktion den höchsten Umwelt-Fußabdruck. Dazu tragen vor allem die Baumwollproduktion, die Herstellung von Farbstoffen und optischen Aufhellern, die Textilveredlung (das Vorbehandeln, Färben, Drucken und Ausrüsten) sowie die Gebrauchsphase der Textilien mit ihren vielen Wasch- und Trocknungsvorgängen bei. Von besonderer Bedeutung ist der hohe Chemikalieneinsatz, der bis zu 1 kg chemischer Produkte je Kilogramm Textil betragen kann. Angesichts tausender vermarkteter chemischer Produkte ist es schwierig, einen Überblick zu erhalten über all die chemischen Stoffe, die vor allem mit dem Abwasser aus der Textilveredlung und -pflege emittiert werden. Nur auf Basis von Fakten und der medienübergreifenden integrierten Betrachtung der textilen Kette lassen sich Konzepte und konkrete Maßnahmen definieren, die zur nachhaltigen Verminderung des Umwelt-Fußabdruckes der Textilproduktion beitragen. Deshalb wird hier aus technisch-naturwissenschaftlicher Sicht das Chemikalien- und Umweltmanagement der gesamten textilen Kette beleuchtet. Dieses umfasst die Erstellung von Positivlisten für Chemikalien sowie die Berücksichtigung von REACh und neuen Erkenntnissen bezüglich Schadstoffen, schadstoffanalytische Aspekte, die umweltfreundlichere Herstellung von Farbstoffen, optischen Aufhellern und Textilhilfsmitteln, prozessintegrierte Maßnahmen bei der Textilveredlung, den Umgang und die Lagerung chemischer Stoffe sowie die Behandlung und das Recycling von Textilabwasser einschließlich eines neuen globalen Abwasserstandards.Item Open Access Datenschutz im interaktiven Fernsehen : Dokumentation eines Workshops(1997) Behaghel, Katrin (Red.)-Item Open Access Doktorandenkolloquium Holzbau Forschung + Praxis : Stuttgart, 18. + 19. März 2024(2024) Kuhlmann, Ulrike; Grönquist, Philippe; Tapia, Cristóbal; Buchholz, LeaItem Open Access The flora, vegetation and monuments of classical Greece(1987) Kull, Ulrich; Diamantoglou, StergosAttica, Central Greece ("Roumeli") and the Peloponnese ("Morea") form the heart of classical Greece. In this area, the landscape, vegetation and human history are intimately associated and interwoven. All three will be given equal consideration during this excursion, where the visit of the sites of Greek Antiquity will each time provide insights into the flora of the past and present. Among and around the ruins, the different types of the characteristic sclerophyllous vegetation of the Mediterranean, including the products of its degradation by man, may be studied. The altitudinal zonation of the vegetation will also be demonstrated, e.g. on Mt. Parnassus and in the central Peloponnese where relatively undisturbed Abies forests still cover extensive areas.Item Open Access Hybride Intelligente Konstruktionselemente (HIKE) - Abschlusskolloquium der DFG-Forschergruppe 981 : Stuttgart, 10.11.2015(Stuttgart : Institut für Konstruktionstechnik und Technisches Design, 2016) Binz, HansgeorgDie Forschergruppe hat die Ergebnisse der zweiten Förderperiode anlässlich eines Abschlusskolloquiums am 10.11.2015 in der Universität Stuttgart vor Gästen aus Industrie und Wissenschaft präsentiert. Dabei wurden die Ergebnisse der Teilprojekte in Vorträgen präsentiert, Prototypen in Form von kleineren Funktionsmustern vorgestellt sowie das Zusammenwirken der HIKE im Gesamtdemonstrator „Schalentragwerk“ vorgeführt. Der vorliegende Sammelband enthält jeweils kurze Zusammenfassungen der Teilprojekte, in denen die Ziele, das Vorgehen und die wesentlichen Ergebnisse vorgestellt werden, sowie die Präsentationsfolien der einzelnen Teilprojektvorträge samt einer Einleitung und Zusammenfassung des Sprechers der Forschergruppe.Item Open Access Informationsvermittlung und Dienstleistungsorientierung wissenschaftlicher Bibliotheken in den USA(1999) Laich, Uwe; Stephan, WernerBei dem Dokument handelt es sich um den kompletten Tagungsband mit allen zu der gleichnamigen Veranstaltung am 8. Oktober 1998 gehaltenen Vorträgen ergänzt um einen Aufsatz, der sich mit dem Web-Angebot der beteiligten Bibliotheken beschäftigt. Als weiteren Zusatz enthält der Tagungsband noch die biographischen Daten der Referenten. Insgesamt enthält der Tagungsband acht Beiträge mit unterschiedlicher Länge, die sich alle in irgendeiner Weise mit dem Dienstleistungsangebot und der Informationsvermittlung wissenschaftlicher Bibliotheken in den USA und Deutschland beschäftigen. Der Schwerpunkt liegt aber ganz eindeutig bei den wissenschaftlichen Bibliotheken in den Vereinigten Staaten von Amerika. Die beteiligten Referenten kamen jeweils aus dem Bibliotheksbereich der Harvard University, der Northwestern University, der University of Kansas, der Yale University und der Universität Stuttgart. Inhaltliche Schwerpunkte bildeten das Fachreferentensystem der USA, das sich ebenso wie das deutsche in einem Wandel befindet, das digitale Angebot der Northwestern University, der Bibliotheksunterricht (Benutzerschulung), der in den USA eine viel größere Rolle spielt als in Deutschland, die umfangreiche Sammlung an deutschsprachiger Literatur der Harvard University, die Zusammenarbeit der Fachreferenten für den westeuropäischen Raum in den USA im Rahmen der Western European Specialists Section sowie der sich in Deutschland vollziehende Wandel im Bibliothekswesen und in der Informationsvermittlung.Item Open Access Integrated best available wastewater management in the textile industry(Essen : Vulkan-Verlag GmbH, 2018) Krist, Helmut; Schäfer, Thomas; Schönberger, Harald; Hussain Inayath, Sajid; Govindarajan, Babu; Kandhaswamy, Ramesh; Maruthamuthu, Nagarajan; Baumann, Charel; Shahzad, Hafiz Muhammad Aamir; Minke, Ralf; Chamoun, Chawk; Kurschat, Reinhold; Kuch, Bertram; Azizi, Neda; San Martin Ruiz, Macarena; Schönberger, HaraldApart from cotton cultivation and the production of dyestuffs and optical brighteners, textile finishing is one of the environmental hotspots. The dominating emission mass stream from textile finishing is wastewater as practically all inorganic and most of the organic (more than 90 %) chemical compounds are discharged with wastewater. Emissions to air, although not negligible, and with solid wastes are of significant lower relevance. In addition, in many parts of the globe, water availability and water scarcity respectively are of increasing concern triggering the need to avoid, reduce or recycle textile wastewater.Item Open Access Kinematics and dynamics for computer animation(1991) Ruder, Hanns; Ertl, Thomas; Gruber, Karin; Günther, Michael; Hospach, Frank; Subke, Jörg; Widmayer, KarinThis tutorial will focus on the physical principles of kinematics and dynamics. After explaining the basic equations for point masses and rigid bodies a new approach for the dynamic simulation of multi-linked models with wobbling mass is presented, which has led to new insight in the field of biomechanics, but which has not been used in computer animation so far.Item Open Access Kongress Die Zukunft des Menschen : Dokumentation ; 10 Jahre Akademie für Technikfolgenabschätzung ; 8./9. Juli 2002, Stuttgart(2003) Mack, Ulrich (Hrsg.); Lehmann, Iris (Red.)Die Lebenswissenschaften haben einen Forschungsstand erreicht, der es ihnen erstmals erlaubt, an den Grundfesten des Menschseins zu rühren. Erwartungshaltung und Wirklichkeit klaffen jedoch weit auseinander. Zudem ist es oft schwierig, das Machbare von der Fiktion zu unterscheiden, angesichts der häufig emotional geführten Diskussion und dem ungehemmten Drang zur Selbstdarstellung bei manchen Beteiligten. Die „Durchbrüche“ auf diesem Gebiet sind außerdem noch wenig belastbar, wie man an dem frühen Tod des Klonschafs Dolly unschwer erkennen kann. Orientierungswissen und -hilfe ist daher mehr denn je gefragt. Die Entschlüsselung des menschlichen Genoms hat die unterschiedlichsten Akteure auf den Plan gerufen. Sie liefern sich wie früher, als es darum ging, als erster den Nord- oder Südpol zu erreichen, einen Wettlauf um neue Sensationsmeldungen – da bleiben Wahrheit und Seriosität häufig auf der Strecke. Motivation und Ziele dieser Akteure sowie ihre moralischen Beweggründe sind höchst unterschiedlich. Neben dem seriösen Forscher, der etwa genetisch bedingte Krankheiten heilen und seine Erkenntnisse zum Wohle der Allgemeinheit einsetzen will, tummeln sich auf diesem Feld Sektierer, die den idealen Menschen oder schlimmer noch typisierbare Menschen nach ihren eigenen Vorstellungen formen wollen. Entweder ist das Ziel ein kommerzialisiertes Produkt„Mensch“, am besten noch abgesichert durch ein exklusives Patent, oder ein Kunstwesen nach dem Willen des jeweiligen „Machers“. Die Achtung vor der Schöpfung spielt, wenn überhaupt, nur noch eine sekundäre Rolle. Auch wenn sich solche Zielvorstellungen heute noch nicht realisieren lassen, so lehrt die Erfahrung, dass es nur eine Frage der Zeit sein wird, bis der wissenschaftliche Fortschritt Wege und Möglichkeiten bereit stellen wird, um die Allmachtsphantasien von wenigen zumindestansatzweise in die Wirklichkeit umzusetzen. Die Frage „Dürfen wir alles tun, was wir können oder müssen der wissenschaftlichen Freiheit, wie schon verschiedentlich geschehen, Grenzen gesetzt werden?“ beantwortet sich damit fast von selbst. Die Entscheidung, wo solche Grenzen zu ziehen sind, darf nicht allein der Politik und diversen Ethikkommissionen überlassen bleiben, die ex cathedra über die Zukunft des Menschen bestimmen. Bei solch fundamentalen Entscheidungen muss der aufgeklärte, mündige und kritisch begleitende Bürger, der um die Chancen und Risiken dieser Technologien weiß, in gleichem Maße seine Werteordnung, sein moralisches Empfinden und seine Erwartungen und Ängste einbringen können. Schließlich geht es um die Zukunft von uns allen und Fehlentwicklungen werden kaum mehr reversibel sein. Die Akademie für Technikfolgenabschätzung in Baden-Württemberg trägt gemäß ihrem Auftrag zu Information, Dialog und Beteiligung bei dieser Thematik bei. Durch die 2001 erschienene, inzwischen in 2. Auflage vorliegende Publikation „Klonen“ leistet sie einen wichtigen Beitrag zu einer fundierteren und sachbezogeneren Diskussion. Der gemeinsam mit der Landesstiftung Baden-Württemberg im Juli 2002 durchgeführte Kongress „Die Zukunft des Menschen“ war ein weiterer Meilenstein auf diesem Weg. Er hatte zum Ziel, renommierte Experten aus den Fachbereichen Gentechnik, Biotechnologie und Künstliche Intelligenz zu einem intensiven Austausch und Dialog mit Multiplikatoren und der interessierten Öffentlichkeit zusammenzubringen. Dank eines hochkarätigen Programms, hervorragenden Referenten und einer großen Zahl hoch qualifizierter und motivierter Teilnehmer konnte dieser Anspruch in jeder Hinsicht eingelöst werden. Denjenigen, die an dem Kongress teilgenommen haben, soll diese Publikation Erinnerung und Nachschlagewerk sein und all denen, die diese Möglichkeit nicht hatten, eine hoffentlich informative, inspirierende und richtungsweisende Hilfestellung, wenn es darum geht, die eigene Position auf diesem schwierigen Feld zu bestimmen.Item Open Access MESAP-III: a tool for energy planning and environmental management : history and new developments ; STE-Seminar, KFA Jülich, 6. September 1994(1994) Voß, Alfred; Schlenzig, Christoph; Reuter, AlbrechtThe utilization of energy contributes substantially to environmental pollution. Increasing environmental degradation calls for quick decisions in the field of energy and environmental planning, which anyhow are subject to a high degree of uncertainty. Major investments in this field are necessary to cope with the challenging environmental targets and to provide suffcient affordable and reliable energy for a growing population in an environmentally compatible way. In the early eighties IER at the University of Stuttgart started the development of the MESAP system, the Microcomputer based Energy Sector Analysis and Planning system. The main objective was to improve the planning capabilities of existing models by integrating modern information management tools with the existing operations research methodologies.Item Open Access Minimisation of wastewater emissions from textile finishing industries(Essen : Vulkan Verlag GmbH, 2019) Krist, Helmut; Konrad, Steffen; Yang, Libin; Qian, Yajie; Zhou, Xuefei; Zarapkar, Bhushan; Ullah, Shafqat; Briani, Filippo; Böhme, Markus; Schönberger, Harald; Maurer, Peter; Waltisberg, Josef; Schönberger, HaraldWastewater is the most important emission from textile finishing. There are many options to prevent and minimise textile wastewater emissions. Measures and techniques with a focus on wastewater treatment including sludge disposal are presented. However, process- and production-integrated measures are outlined as well.Item Open Access Morphological, syntactic and semantic aspects of dispositions(Stuttgart : Universität Stuttgart, SFB, 2016) Martin, Fabienne; Pitteroff, Marcel; Pross, TillmannThis volume gathers a subset of the papers presented at the Workshop on the Morphological, Syntactic and Semantic Aspects of Dispositions held at the University of Stuttgart from June 25 to June 27 2015. The invited speakers were Artemis Alexiadou, Nora Boneh, Elena Castroviejo, Ariel Cohen, Bridget Copley, Hans Kamp, Marika Lekakou, John Maier, Christopher Piñón, Károly Varasdi and Barbara Vetter. Other contributions have been presented by Simona Aimar, Saveria Colonna, Marta Donazzan, Berit Gehrke, Daniel Kodaj, Nick Kroll, Isabelle Roy and Lucia Tovena. While appeals to dispositions have been made in just about every area of linguistics and philosophy, the syntax, semantics and ontology of dispositions is still subject to debate. A first obvious reason why dispositions are hard to deal with in linguistics is that the predominant Neo-Davidsonian account of logical forms is based on the isolated analysis of actual relations between causes and effects, whereas dispositions pertain to potential cause-effect relations, difficult to grasp in traditional syntax/semantic frameworks. Besides, whereas for actual causations, the binary distinction between the roles Agent/Causer and Theme/Patient makes perfect sense, possible cause-effect relations partly escape these distinctions. The instantiation of a disposition in an object is not related to being an Agent or to being a Theme of the disposition. A second obvious difficulty raised by dispositions is due to the versatility of dispositional predicates. Those are commonly used to describe either permanent or temporary properties of individuals, or manifestations of these properties through events, not to mention their other (e.g. epistemic) readings. The goal of the workshop was to subject to critical scrutiny the Neo-Davidsonian foundation of syntax and semantics in the light of the linguistic expression of dispositional causal powers. We aimed to bring together linguists and philosophers interested in contributing to a common point of departure in the analysis of dispositions beyond the Neo-Davidsonian framework. Three central questions emerged as central issues of the workshop: 1. Uncontroversially, dispositions are properties - but what kind of properties are dispositions? 2. What are dispositions properties of? 3. Do the different expressions we find in natural languages differentiate between different types of dispositions? The papers collected in this volume represent the variety of answers that have been provided by the workshop participants to one or more of these questions. Concerning the first question, centered on the nature of dispositions, the paper by Vetter argues that dispositions are irreducible modal properties, and proposes a modal semantics which uses the resources of an ‘anti-Humean’ metaphysics instead of possible worlds. The papers by Boneh and Cohen approach in more detail the specificity of the modal properties that correspond to dispositions. Boneh examines the relation between dispositional and habitual readings. She argues that in bare generic sentences, there is no sound linguistic criteria to set apart dispositional readings from habitual readings. Cohen proposes a classification of dispositions according to whether their argument is a causer or not, and whether they are always, or only sometimes realized. He demonstrates that each such type of disposition is expressed by a distinct linguistic expression. The bearer of dispositions is the subject of the papers of Kroll, Donazzan & Tovena and Cohen. Kroll analyzes events in progress as being the bearers of dispositions. Donazzan and Tovena, like Cohen, highlight the fact that bearers of dispositions are often systems consisting of one or more protagonists situated in an environment. With respect to the linguistic expression of dispositions, Castroviejo & Oltra-Massuet present a case study on the semantics of the Spanish expression ser capaz ‘be capable’, which is carefully compared to its English counterpart. The paper by Alexiadou examines the restrictions on the formation of -able adjectives from object experiencer verbs. She argues that their availability depends not only on their aspectual properties, but also on the Voice system of a language - i.e. dispositional -able formation takes as input a structure involving passive resp. middle Voice. Finally, Roy et. al. consider how grammatical and conceptual knowledge affect children’s and adults’ interpretation of derived -er nominals such as cutter of branches (a phrasal -er nominal) and branch cutter (a compound -er nominal) in English.