Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
301 results
Search Results
Item Open Access Reinforcement of precursor-derived Si-(B-)C-N ceramics with carbon nanotubes(2005) Katsuda, Yuji; Aldinger, Fritz (Prof. Dr.)Incorporation of carbon nanotubes (CNTs) into the precursor-derived Si-(B-)C-N ceramics has been investigated for the reinforcement of the materials. Different types of CNTs consisting of multi-wall (MW) and single-wall (SW) were examined as the reinforcement of the Si-(B-)C-N ceramics to make a comparison of the effect. Mechanical properties demonstrated in the Si-(B-)C-N/CNT nanocomposites have been discussed in connection with their microstructural features characterized by scanning electron (SEM) and transmission electron microscope (TEM). Other material properties of the nanocomposites as revealed on the thermal stability and the crystallization behavior have been also considered in relation to the microstructural characteristics of the nanocomposites. Dense Si-C-N/CNT nanocomposites containing different types of MWCNTs were successfully prepared by casting of a mixture of MWCNTs and a liquid precursor polymer followed by cross-linking and thermolysis. In these processes, the sonication for deagglomeration and dispersion of CNTs in the precursor polymer as well as the thermolysis condition for ceramization of the cross-linked precursor/CNT nanocomposites was examined to obtain homogeneously CNT distributed Si-C-N ceramics. Fracture toughness behavior of the Si-C-N/CNT nanocomposites has been evaluated by a thermal loading technique on the disc shaped materials. The results reveal a dependence of the fracture toughness on the type of the MWCNTs. The MWCNTs showing high integrity in the tube structure exhibit a remarkable increase in the fracture toughness at the CNT content of 1 – 2 mass %, whereas the other ones possessing amorphous nature exhibits no effect. The microstructural analyses at the fracture surfaces have demonstrated different features of CNTs between both nanocomposites, where pulling out and breaking of CNTs are considered to be reasons for the observed fracture toughness increase. No significant influences observed on the material properties of the Si-C-N/CNT nanocomposites besides the toughening indicates that CNTs can simply work as the reinforcement for the Si-C-N ceramics. SWCNTs incorporation into the Si-C-N materials has revealed toughening effect with similar microstructural features to the MWCNT reinforced Si-C-N nanocomposites. In this system, it was found that the deagglomeration and debundle of the SWCNTs are major issues to make the best use of SWCNTs as the reinforcements. Concerning the Si-B-C-N/CNT nanocomposites, preparation processes via a casting and a warm pressing from different types of boron-containing precursors have been investigated to produce rigid MWCNT nanocomposites. The observed pulling out and breaking CNTs structure at the fracture surfaces of the Si-B-C-N/CNT nanocomposites indicate the toughening effect of CNTs similar to Si-C-N/CNT ceramics. Moreover, the interaction between CNTs and the matrix has appeared to be changed with increasing thermolysis temperature. However, the crystallization of the Si-B-C-N matrix and the deterioration of thermal stability have been disclosed in the Si-B-C-N/CNT nanocomposites. It is revealed that embedded CNTs have an effect to accelerate or to generate nucleation sites for the crystallization of Si-B-C-N matrix.Item Open Access Experimental and computational phase studies of the ZrO2-based systems for thermal barrier coatings(2006) Wang,Chong; Aldinger, Fritz (Prof.)The ZrO2-based materials are practically important as the thermal barrier coatings (TBC) for high temperature gas turbines, due to their low thermal conductivity, high temperature thermal stability and excellent interfacial compatibility. Studies of the phase equilibira, phase transformation, and thermodynamics of the ZrO2-based systems can provide the necessary basic knowledge to develop the next generation TBC materials. In the thesis, the systems ZrO2 - HfO2, ZrO2 - LaO1.5, ZrO2 - NdO1.5, ZrO2 - SmO1.5, ZrO2 - GdO1.5, ZrO2 - DyO1.5, ZrO2 - YbO1.5 and ZrO2 - GdO1.5 - YO1.5 were experimentally studied. The samples were prepared by the chemical co-precipitation method, with aqueous solutions Zr(CH3COO)4, HfO(NO3)2, and RE(NO3)3×xH2O (RE=La, Nd, Sm, Gd, Dy, Yb) as starting materials. Various experimental techniques, X-ray diffraction (XRD), scanning electron microscopy (SEM), electron probe microanalysis (EPMA), transmission electron microscopy (TEM), differential thermal analysis (DTA), and high temperature calorimetry were employed to study the phase transformation, phase equilibria between 1400 and 1700°C, heat content and heat capacity of the materials. A lot of contradictions in the literature were resolved and the phase diagrams were reconstructed.Item Open Access Synthese und Charakterisierung teilfluorierter Poly(aryl)-Ionomere als Polymerelektrolytmembranen für Brennstoffzellen und ESR-spektroskopische Untersuchung der radikalinduzierten Degradation von Modellverbindungen(2008) Schönberger, Frank; Roduner, Emil (Prof. Dr.)Im ersten Teil dieser Arbeit werden zunächst verschiedene Strategien zum Aufbau sulfonierter teilfluorierter Poly(aryl)e entwickelt und synthetisch umgesetzt. Konzeptionell liegt dabei die Hypothese zugrunde, dass sich teilfluorierte Poly(aryl)-Ionomere gegenüber nichtfluorierten durch eine erhöhte Acidität auszeichnen. Außerdem weisen sie eine höhere Bindungsdissoziationsenergie sowohl der C-F-Bindungen als auch der benachbarten C-H-Bindungen auf, womit ein Gewinn an radikalischer und somit chemischer und thermischer Stabilität einhergeht. Um den Einfluss der chemischen Struktur der jeweiligen (teilfluorierten) Monomerbausteine zu untersuchen, werden zunächst homo-Polymere mit verschiedenen Struktureinheiten (mit aromatischen C-F-Bindungen, C(CF3)2-verbrückten und CF3-substitutierten Phenylenringen) durch Polykondensation synthetisiert und charakterisiert (Elementaranalyse, NMR-Spektroskopie, Gelpermeationschromatographie). Zur gezielten Synthese der Monomere werden bekannte organische Reaktionen, wie die Balz-Schiemann-Reaktion, Suzuki-Reaktion und die Ullmann-Biarylsynthese, angewandt. Nach Sulfonierung der homo-Polymere werden (ionisch-vernetzte) Membranen hergestellt und hinsichtlich Eignung als Polymerelektrolytmembran für Brennstoffzellen charakterisiert (Ionenaustauscherkapazität, Protonenleitfähigkeit, thermische und chemische Stabilität, Wasseraufnahme, Längenänderung). Neben der chemischen Natur der Monomere ist auch deren Anordnung im Polymer bzw. Ionomer für die Eigenschaften der hergestellten Membranen wichtig. Aus diesem Grunde werden mikrophasenseparierte Block-co-Ionomere, ausgehend von hydrophilen (sulfonierten) und hydrophoben (teilfluorierten) telechelen Makromonomeren, synthetisiert und charakterisiert. Dabei werden sowohl der Einfluss der jeweiligen Blocklänge als auch der chemischen Natur der eingesetzten Monomere auf die Membraneigenschaften vergleichend untersucht. Auf der Grundlage der in diesem Teil der Arbeit gewonnen Erkenntnisse werden die Vor- und Nachteile teilfluorierter Ionomermembranen analysiert und diskutiert. Der zweite Teil der Arbeit befasst sich mit der ESR-spektroskopischen Untersuchung der radikalinduzierten Degradation von Modellverbindungen, denen Struktureinheiten einiger im ersten Teil der Arbeit hergestellten Poly(aryl)-Ionomere entsprechen. Diese Modellverbindungen werden in einer Durchflusszelle Hydroxyl- und Hydroperoxylradikalen ausgesetzt, welche direkt im Hohlraumresonator eines ESR-Spektrometers durch Photolyse von Wasserstoffperoxid erzeugt werden. Mit diesem Aufbau können verschiedene Parameter (wie die Hydroxylradikal- und Monomerkonzentration, die Durchflussrate und der pH-Wert) gezielt variiert werden und so deren Einflüsse in Bezug auf die Produktbildung der aromatischen Modellverbindungen mit den Hydroxylradikalen abgeschätzt werden. Aus diesen Untersuchungen lassen sich Rückschlüsse auf mögliche Radikalreaktionen des Poly(aryl)-Ionomers ziehen und damit Aussagen in Bezug auf zu vermeidende strukturelle Merkmale (z.B. Art der Endgruppen der Ionomere) und zu vermeidende Bedingungen (z.B. pH-Wertschwankungen in der Membran) treffen.Item Open Access Low temperature sintering additives for silicon nitride(2003) Matovic, Branko; Aldinger, Fritz (Prof. Dr.)Pressureless sintering of Si3N4 with two new additives based on the Li2O-Y2O3 system (LiYO2) and on the Li2O-Al2O3-SiO2 system (LiAlSiO4) were investigated in this study. Experiments were conducted in the areas of powder processing, sintering optimization, phase transformation characterization and microstructural development. Sintered materials were characterized by fracture toughness and thermal diffusivity measurements. The experimental results are summarized in the following: Using three different mechanical mixing processes (attrition milling, ball milling and vibratory milling) for the introduction of additives (LiYO2) into Si3N4 powders, the best results are obtained for attrition milling. This method yields a good dispersion of the additive powder in fine unagglomerated Si3N4 without contamination. It also yields good sintering characteristics. For the LiYO2 system, the densification depends largely on the content of sintering additive. A larger amount of additive means a higher volume of liquid phase, which is favorable for efficient particle rearrangement resulting in higher values of density rate. In case of the LiAlSiO4 additive, it is found that the densification is less dependent on the additive content. The overall sintering kinetics at the low temperatures is less retarded when using the LiYO2 additive in comparison to the LiAlSiO4 additive, resulting in higher densities obtained at lower temperatures and shorter annealing times. With prolonged heating time, the differences in the degree of densification become smaller. The kinetics of phase transformation in the both systems are found to be of first order. In the LiYO2 system, the transformation rate constant increases with increasing additive content. While the opposite behavior is noticed in case of the LiAlSiO4 additive, i.e. the rate constant decreases with higher additive content. The phase transformation is always completed at a later stage than the densification. The lag between the two phenomena in the sintering process is more pronounced with the Li2O-Al2O3-SiO2 additive system. The alpha to beta Si3N4 transformation is accompanied by grain growth. Upon prolongation of the annealing time the grain size and the morphology of the growing beta-Si3N4 particles are significantly changed from equiaxed to elongated. The grain growth becomes anisotropic, leading to rod-like betaƒ{Si3N4 crystals. The growth rate is higher in the LiYO2 system than in the LiAlSiO4 system. At 1600„aC, the microstructure of Si3N4 ceramics sintered with both the additives is characterized by a homogeneous distribution of elongated beta Si3N4 grains and glassy phase located in thin layers at grain boundaries and at triple points. The maximum values obtained for fracture toughness are 6.8 and 6.2 for the materials sintered with LiYO2 and LiAlSiO4 additives, respectively, at 1600„aC for 8 h. The higher value of fracture toughness in the LiYO2 system is attributed to its microstructure with a higher aspect ratio of the elongated beta-Si3N4 grains. Thermal conductivity of the material sintered with the LiYO2 additive is higher in comparison to that sintered with LiAlSiO4 additive. In the LiAlSiO4 system, partial dissolution of Al3+ in the beta-Si3N4 grains results in increasing phonon scattering and hence decreases the thermal conductivity.Item Open Access Die alpha-Amylase aus Bacillus amyloliquefaciens: Verbesserung der Alkaliaktivität und Steigerung der spezifischen Aktivität mittels gerichteter Evolution(2002) Bessler, Cornelius; Schmid, Rolf D. (Prof. Dr.)Amylasen werden häufig in Waschmitteln eingesetzt. Diese Anwendung werden Amylasen benötigt, die eine hohen Stabilität und Aktivität bei alkalischem pH besitzen. Zudem ist eine hohe spezifische Aktivität wünschenswert, da so Enzymmenge und dadurch Kosten gespart werden können. Ziel dieser Arbeit war die Etablierung und Anwendung von Methoden der gerichteten Evolution auf die Amylase aus Bacillus amyloliquefaciens (BAA) zur Steigerung der spezifischen Aktivität und der Alkaliaktivität. Die Gene für die BAA sowie zwei Punktmutanten derselben wurden durch Error-prone PCR mutagenisiert und durch Gen-Shuffling rekombiniert. Zur Durchmusterung der Mutantenbibliotheken wurde ein Hochdurchsatz-Test auf Basis des kommerziell erhältlichen Phadebas(r)-Tests entwickelt. Das pH-Optimum von Mutante 42 ist um eine pH-Einheit zu höheren pH-Werten verschoben und liegt bei pH 7. Dies führt zusammen mit einer um den Faktor fünf höheren Aktivität bei pH 10 zu einem verbreiterten pH-Profil. Außerdem stieg die Aktivität in den Periplasmafraktionen um den Faktor vier und die spezifische Aktivität um den Faktor 1,5 als beim Wildtyp. Eine weitere Mutante, Mutante 29 zeigt das pH-Profil des Wildtyps. Allerdings liegen Aktivität der Periplasmafraktionen und spezifische Aktivität um den Faktor 40 beziehungsweise um den Faktor 9 höher als beim Wildtyp. Mutante B1, die durch Error-prone PCR mit der Mutante 29 erzeugt wurde zeigt ebenfalls das pH-Profil des Wildtyps. Zudem ist ihre spezifische Aktivität niedriger als die der Mutante 29, aber immerhin noch um den Faktor 4,2 höher als die des Wildtyps. Durch Vergleich der Aminosäuresequenzen der Mutanten mit dem Wildtyp und mit homologen Amylasen konnte der Einfluss der einzelnen Mutationen erklärt werden.Item Open Access Using spin polarised positive muons for studying guest molecule partitioning in soft matter structures(2007) Martyniak-Stronczek, Aleksandra; Roduner, Emil (Prof. Dr.)The intention of this thesis is to explore the effect of guest molecules on the structure of diverse soft matter architectures, and thus the stability of the entire systems. More specifically, we focus on the determination of the factors that affect partitioning of fragrance components in emulsions and microemulsions, including various lyotropic liquid crystalline mesophases of cationic and anionic surfactants. It is well known that the most common fragrance materials are created based on the mixtures of aliphatic alcohols or/and phenyl alcohols. Until recently, however, qualitative and quantitative studies of the guest molecule partitioning into the surfactant membrane have been performed mostly for short, medium and long chain aliphatic alcohols. In consequence, in the literature arose a gap of information on the distribution of alcohols containing an aromatic group into colloidal surfactant dispersions. Hence, to fill at least partly this gap, the probes used in this work are muoniated cyclohexadienyl radicals derived from five different phenyl alcohols: 2-Phenylethan-1-ol (n = 2), 3-Phenylpropan-1-ol (n = 3), 4-Phenylbutan-1-ol (n = 4), 5-Phenylpentan-1-ol (n = 5) und Para-propyl-2-phenylethan-1-ol (n = 2 + 3). The variation of their hydrocarbon chain length (distinguished by the number, n, of CH2 groups in their hydrocarbon chain) changes their hydrophobicity, and this is expected to affect their partitioning between the aqueous and the hydrocarbon moiety of the surfactant dispersion, which is the main focus of the present study. Furthermore, a detailed understanding of solvation thermodynamic properties and reorientational dynamics of the chosen species, including Heisenberg spin exchange in order to confirm the interpretation of particular aspects, is also presented here. Common methods for the investigation of a variety of soft matter structures, such as spherical micelles, vesicles, lamellar, rectangular, hexagonal and cubic phases or bi-continuous sponge type structures include light, X-ray and neutron scattering, and measurements of calorimetric and rheological properties. Nuclear magnetic resonance is a powerful tool for the study of the dynamics of specific molecules or groups, or also of the entire structures. For the same purpose but with higher sensitivity, fluorescent dye molecules or spin labels are introduced as guests or bound to the amphiphile in specific positions, permitting optical spectroscopy (UV-Vis) or electron spin resonance studies, respectively. Technical applications may require other types of guest molecules to be introduced into these structures. Prominent examples are drug molecules for their delivery to specific sites in the body, or skin care, dyes and fragrance molecules in day care products or additives to food. They are often needed in low concentrations (because of the limited solubility or high toxicity, etc.) that makes it difficult to monitor them with conventional methods at a molecular level. For these reasons we used here a special experimental technique which permits highly sensitive spectroscopy, the Avoided Level Crossing Muon Spin Resonance (ALC-mSR). ALC-mSR relies on a unique property of the positive muon, i.e. where it becomes attached to a C=C double bond or phenyl group via addition of the muonium atom (Mu), which can be regarded as a light hydrogen isotope. Mu addition to unsaturated molecules produces radicals that contain the muon as a fully polarized spin label which reveals information about the structure, kinetics, distribution and solvation thermodynamics of such radicals even under extremely dilute conditions in different colloidal dispersions. Moreover, the high spin polarisation and the single particle counting technique make the muon an exceptionally sensitive probe. It has been already shown that ALC-mSR has so far found applications for the investigation of muonium-substituted free radicals in various environments, for example in the gas phase, in polymers, in liquid crystals, in zeolites, and also for Mu in semiconductors and for muons in metals. This time, however, to prove that this method is also suitable to apply in more complex (multicomponent) systems than described above, the ALC-mSR serves here as a tool for sensitive monitoring of the local environment and reorientational dynamics of muoniated radicals (kept at very low concentrations) in ternary and quaternary surfactant mixtures. Thus, it is a successive challenge of these studies to show that the muoniated radical can be treated as a spectator of the changes in the properties of diverse surfactant systems at a molecular level.Item Open Access In-situ radiation grafting of polymer films and degradation studies of monomers for applications in fuel cell membranes(2007) Mitov, Svetlin; Roduner, Emil (Prof. Dr.)The present work consists of three parts which deal with the optimization of the properties of polymers finding application as proton exchange membranes in PEMFCs. The focus is the oxidative and photochemical stability of non-fluorinated polymer membranes, as well as the radiation-induced grafting of commercially available fluoropolymer films. The use of the ESR technique is common for the first two parts of the dissertation. The third part comprises the results and discussions of DFT calculations for non-fluorinated and fluorinated fragments. In order to predict hydroxyl radical initiated degradation of new proton conducting polymer membranes based on sulfonated polyetherketones and polysulfones, five non-fluorinated aromatics (4,4'-sulfonyldiphenol, bisphenol A, 4,4'-diphenol, 4,'-dihydroxybenzophenone and sulfonated 4,4'-dichlorodiphenylsulfone) are chosen as model compounds for ESR experiments, aiming at the identification of products of HO· radical reactions with these monomers. Direct photolysis of aqueous solutions of H2O2 was chosen as the source of HO· radicals. In order to distinguish HO· radical attack from direct photolysis of the monomers, experiments were carried out in the presence and absence of H2O2. In the second part of the present work three different electron beam irradiated fluoropolymers - poly(ethylene-alt-tetrafluoroethylene), poly(tetrafluoroethylene-co-hexafluoropropylene) and poly(vinylidenefluoride), as well as their grafting reactions with styrene, 25% styrene in benzene and 25% styrene in ethanol are investigated by means of ESR. Firstly, it was possible to compare the radiation chemistry of the three fluoropolymers that have been irradiated using the same irradiation source, doses and atmospheres. Secondly, it was possible to compare the decay of radicals in the different fluoropolymers by carrying out in-situ ESR measurements in a similar systematic manner during the radiation grafting process, aiming at an understanding of the influence of the irradiation atmosphere and of the diluent. In addition, in the radiation grafting of polymer films with styrene for fuel cell applications it is important to control whether the polystyrene chain is grafted onto a peroxy or a carbon centered radical. Thus thermodynamic properties of small alkyl and alkyl-peroxy radicals are studied to model primary, secondary and tertiary radicals in non-fluorinated and perfluorinated polymers and a comparative DFT study is conducted. Furthermore, it is shown based on DFT calculations that pronounced spin polarization effects lead to unexpected behavior of the hyperfine anisotropy. This is demonstrated by comparison of the parameters of CF3·CF2, both in its fully optimized non-planar and in a forced planar conformation, with those of the analogous non-fluorinated and essentially planar CH3·CH2 radical. A B3LYP or UB3LYP hybrid functional and 6-311+G** or EPR-II basis sets are used, and all calculations are performed with the Gaussian package.Item Open Access High rate electrochemical dissolution of iron-based alloys in NaCl and NaNO3 electrolytes(2002) Wagner, Thomas; Mittemeijer, Eric Jan (Prof. Dr. Ir.)With the investigations presented in this work, the reaction mechanisms and principles of steels upon the high rate electrochemical dissolution in activating NaCl electrolytes and passivating NaNO3 electrolytes are revealed and the role of anodic surface films developing at the substrate surface is included in schematic dissolution models. For the development of accurate dissolution models, mask-less Electrochemical Machining (ECM) experiments with the flow channel cell at high electrolyte flow rates (up to 7 m/s) and current densities up to 70 A/cm2 were carried out in combination with following ex situ surface analysis. On the basis of these experiments a satisfactory dissolution model for heterogeneous steel substrates is presented, with special respect to the influence of local turbulences in the flowing electrolyte. To specify and characterize the electrochemical behaviour of the examined electrolyte / substrate combination, polarization measurements with the rotating cylinder electrode(RCE) are presented.Item Open Access Mechanische Spektroskopie an dünnen Kupferschichten(2001) Hagen, Joachim von der; Arzt, Eduard (Prof. Dr. phil.)In dieser Arbeit wurden erstmalig dünne Kupferschichten, die für die Mikroelektronik von zunehmendem technologischen Interesse sind, systematisch mit Hilfe der mechanischen Spektroskopie untersucht. Dabei handelt es sich um eine empfindliche und zerstörungsfreie Messmethode, mit der man Informationen über Defektstrukturen in der Schicht und in der Substrat/Schicht-Grenzfläche erhalten kann. Darüber hinaus wurden die spektroskopischen Ergebnisse ebenfalls erstmalig vor dem Hintergrund der thermomechanischen Eigenschaften dünner Schichten diskutiert. Die Voraussetzung hierfür wurde durch eine apparative Neuentwicklung geschaffen. Bei den untersuchten Systemen handelte es sich um Kupferschichten auf den Trägermaterialien Silizium und Saphir. Die Messungen beruhen auf der Dämpfung von Eigenschwingungen zwischen 20 bis 530°C. Daneben wird die Eigenfrequenz gemessen, aus der man prinzipiell Rückschlüsse auf den E-Modul von Schicht und Substrat, bzw. auf die Haftung ziehen kann. Es wurden vor allem passivierte und unpassivierte Kupferschichten zwischen 1 und 4 µm auf Siliziumsubstraten untersucht. Kupferschichten auf Silizium-Substraten zeigen ein breites, bei Temperaturzyklen stabiles, Dämpfungsmaximum zwischen 280 und 380°C. Mit zunehmender Schichtdicke wächst dessen Intensität, während sich seine Position zu höheren Temperaturen verschiebt. Auf Grund seiner Aktivierungsenthalpie kann dieses Maximum auf Versetzungsbewegungen zurückgeführt werden. Man nimmt an, dass die Versetzungen thermisch aktivierte, lokale Bewegungen um ihre Gleichgewichtslage ausführen, während sie an ihren Enden fest verankert sind. Als Verankerungspunkte sind vor allem die Grenz-, bzw. die Oberfläche, sowie weitere Versetzungen anzusehen. Die Relaxationsparameter der Dämpfungsmaxima zeigen, dass Einengungseffekte die Mobilität der beweglichen Versetzungssegmente maßgeblich bestimmen, wie es im Zusammenhang mit den hohen inneren Spannungen in dünnen Schichten diskutiert wird.Item Open Access Modifizierung von Silicaten und Boraten dreiwertiger Lanthanide durch Oxid- und Fluoridionen(2000) Müller-Bunz, Helge; Schleid, Thomas (Prof. Dr.)Zwei Dinge sollten erforscht werden: Erstens der Existenzbereich der Oxidsilicate M2O[SiO4] im A-Typ und zweitens, welchen Einfluß F(-)-Ionen auf die Strukturen von Lanthanid-Silicaten und -Boraten ausüben. Der erste Teil gelang gut: Die A-M2O[SiO4] ließen sich mit allen M3+-Kationen (M = La - Lu) darstellen. Der zweite Teil jedoch lieferte wenige neue Erkenntnisse. Der Existenzbereich der Fluorid-Silicate M3F[Si3O10] ließ sich auf M = Dy - Er eingrenzen, wobei allerdings Präparationsversuche bei anderen Temperaturen noch ausstehen. Zu dem Lanthanfluorid-cyclo-Trisilicat La3F3[Si3O9] ließen sich trotz Variation der Darstellungsbedingungen keine Analoga mit anderen M3+-Kationen darstellen. Ein weiteres Fluoridsilicat des Erbiums, Er4F2[Si2O7][SiO4], fiel bei Verwendung eines großen Überschusses an ErF3 an. Versuche zur Synthese anderer Fluoridsilicate des Lanthans lieferten zwei neue Formen von Lanthan-Disilicat La2Si2O7. Zu Vergleichszwecken wurde auch ein Kristall von A-La2[Si2O7] vermessen. Versuche, das bereits veröffentlichte Gd3F3[BO3]2 zu reproduzieren, führten statt dessen zu Gd2F3[BO3]. Außerdem traten noch Einkristalle von l-Nd[BO3] im Aragonit-Typ, von Nd(BO2)3 sowie von p-ErBO3 auf. Die zu Beginn dieser Arbeit angestellte Vermutung, daß F(-)-Ionen in Lanthanid-Silicaten und -Boraten aufgrund ihres "harten" Charakters weniger strukturchemische Anpassungsfähigkeit zeigen als z.B. Cl(-)-Ionen, wird durch die vorgestellten Ergebnisse vollauf bestätigt: In allen fluoridhaltigen Verbindungen sind die F(-)-Ionen trigonal-planar oder -pyramidal umgeben. Durch das Erzwingen einer Dreierkoordination aus M3+-Kationen üben die F(-)-Teilchen eine stärker strukturbestimmende Wirkung aus als die variabel koordinierten X(-)-Ionen (X = Cl, Br, I). Daher zeigen die Fluorid-Silicate und -Borate der Lanthanide keine Entsprechung in Zusammensetzung oder Struktur zu den anderen Halogenid-Silicaten oder -Boraten.