Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
61 results
Search Results
Item Open Access Entwicklung laserspektroskopischer Methoden zur Analyse der Verdunstungseigenschaften von Brennstofftropfen(Stuttgart : Deutsches Zentrum für Luft- und Raumfahrt, Institut für Verbrennungstechnik, 2021) Werner, Stefanie; Riedel, Uwe (Prof. Dr. rer. nat.)Die steigenden Emissionen des klimaschädlichen Treibhausgases CO2 durch die Verbrennung von fossilen, endlichen Energieträgern müssen möglichst schnell und nachhaltig reduziert werden. Ein vielversprechender Lösungsansatz zur Reduzierung der Schadstoffemissionen bei der Verbrennung liegt in dem Einsatz von alternativen und erneuerbaren Brennstoffen. Als Energieträger bieten sich auf Grund ihrer hohen Energiedichte vor allem flüssige Brennstoffe an. Diese werden typischerweise durch Druckzerstäubung in die Brennkammer eingebracht, verdunstet und dann mit dem Oxidationsmittel vermischt und verbrannt. Die Verdunstung der kleinen Brennstofftropfen des sogenannten Sprays ist von entscheidender Bedeutung für den Gesamtverbrennungsprozess in Verbrennungsmotoren und Gasturbinen. Im Allgemeinen bestimmt die Verdunstungsrate die Verbrennungsrate. Daher sind Modelle notwendig, die eine genaue Vorhersage der Brennstoffverdunstung ermöglichen. Zur Validierung dieser Modelle werden quantitative Messungen unter genau definierten Randbedingungen benötigt. Da die Prozesse in technischen Brennkammern sehr komplex sind, werden Experimente zur Tropfenverdunstung häufig mit linearen, monodispersen Tropfenketten durchgeführt, um die Kopplung zwischen den verschiedenen Effekten zu minimieren. Durch die geringe Größe der Tropfen (typischerweise wenige hundert Mikrometer oder weniger), erfordert die experimentelle Untersuchung eine hohe räumliche Auflösung. In dieser Arbeit wurden quantitative, laseroptische Messtechniken mit hoher räumlicher Auflösung zur experimentellen Untersuchung der Tropfenverdunstung an monodispersen Tropfenketten entwickelt. Mit den Messtechniken wurden Validierungsdaten für die Verdunstungseigenschaften von verschiedenen Brennstoffen bestimmt. Konzentrationsmessungen von verdunsteten Kohlenwasserstoffen wurden unter Verwendung von Infrarot-Laserabsorptionsspektroskopie und laserinduzierter Fluoreszenzspektroskopie (LIF) durchgeführt. Tropfenketten wurden mit einem Tropfenkettengenerator erzeugt, welcher vertikal in einem Strömungskanal installiert wurde. Die untersuchten Brennstoffe waren Cyclohexan, iso-Octan, n-Heptan, n-Pentan, 1-Butanol und Anisol. Der Strömungskanal wurde mit einer laminaren Luftströmung bei verschiedenen Temperaturen (313 K - 430 K) durchströmt. Da die untersuchten Tropfen einen Durchmesser in der Größenordnung von 120 bis 160 µm hatten und die Konzentrationsgradienten nahe der Tropfenoberfläche groß waren, war eine hohe räumliche Auflösung der Messtechniken erforderlich. Die Absorptionsmessungen wurden mit der Infrarotstrahlung eines HeNe-Lasers bei λ = 3,39 µm durchgeführt, um die CH-Streckschwingung der Kohlenwasserstoffe anzuregen. Die für die Quantifizierung der Brennstoffkonzentrationen benötigten Absorptionsquerschnitte wurden in einer beheizten Gaszelle für Temperaturen von 300 K - 773 K bestimmt. Die räumliche Auflösung im Strömungskanal betrug < 50 µm über eine Länge von 2 mm (Halbwertsbreite). Durch die Zylindersymmetrie und gute Stabilität der Tropfenketten konnten zeitliche Mittelungs- und Tomografieverfahren angewandt werden. Hierdurch konnten radiale Konzentrationsprofile an mehreren Positionen im Strömungskanal erhalten werden. Aus dem Anstieg der Dampfkonzentration an verschiedenen Messpositionen konnte die Verdunstungsrate bestimmt werden. Die Verdunstungsraten wurden in Abhängigkeit von der Mantelstromtemperatur (313 K - 430 K), der Tropfengeschwindigkeit (8 m/s - 23 m/s), der Tropfenerzeugungsfrequenz (12 kHz - 75 kHz) und dem Tropfenabstand (300 µm - 685 µm) gemessen. Im untersuchten Temperaturbereich steigt die Verdunstungsrate des Brennstoffs linear mit der Temperatur an. Die Reihenfolge der Brennstoffe in Bezug auf die Verdunstungsrate entspricht den Siedepunkten der einzelnen Brennstoffe. Da technische Brennstoffe häufig eine Mischung mehrerer Komponenten sind, ist die Untersuchung von Brennstoffgemischen von großem Interesse. Daher wurde ein Messverfahren entwickelt, um binäre Gemische zu untersuchen. Das Verfahren wurde verwendet, um eine Mischung aus Cyclohexan und Anisol zu untersuchen. Zwei Messtechniken - laserinduzierte Fluoreszenz (LIF) und Infrarot Absorptionsspektroskopie - wurden verwendet, um beide Spezies zu messen. Um λ = 3,39 µm ist der Absorptionsquerschnitt von Cyclohexan um etwa den Faktor 8 größer als von Anisol. Im untersuchten Fall war die Konzentration aufgrund des höheren Dampfdrucks ebenfalls deutlich größer. Daher konnte das Infrarot-Absorptionssignal praktisch ausschließlich Cyclohexan zugeordnet werden. Anisol hat bei Anregung bei λ = 266 nm eine sehr gute Fluoreszenzquantenausbeute, während Cyclohexan keine Fluoreszenz zeigt. LIF ermöglicht daher die Quantifizierung von Anisol (oder anderen Aromaten) ohne Interferenz durch Kohlenwasserstoffe. Es wurde ein Messverfahren entwickelt, welches Halationseffekte vermeidet, die typischerweise in planaren LIF-Experimenten an Tropfenketten auftreten. Kalibrationsmessungen, die im gleichen Strömungskanal durchgeführt wurden, ermöglichten die Quantifizierung der verdunsteten Anisolkonzentrationen. Die räumliche Auflösung betrug 80 µm. Ähnlich wie bei den Einzelkomponentenmessungen wurden Verdunstungsraten bestimmt. Wie aufgrund des niedrigeren Dampfdrucks zu erwarten, ist die Verdunstungsrate von Anisol niedriger als die von Cyclohexan. Die Verdunstungsrate von Cyclohexan in der binären Mischung stimmt gut mit den Einzelkomponentenmessungen überein. Das entwickelte Messverfahren ist sehr vielversprechend für weitere Untersuchungen an Mehrkomponentenmischungen. In dieser Arbeit konnte damit erstmals mit hoher räumlicher Auflösung die Verdunstung von Brennstoffkomponenten mittels Absorptionsspektroskopie in der Nähe von Brennstofftropfen untersucht werden. Zusätzlich wurden in Kombination mit laserinduzierter Fluoreszenzspektroskopie Messungen an binären Mischungen durchgeführt. Damit steht ein wertvoller Datensatz zur Validierung von numerischen Simulationen zur Verfügung.Item Open Access Enzymatic asymmetric dihydroxylation of alkenes(2016) Gally, Christine; Hauer, Bernhard (Prof. Dr.)The introduction of chirality into C=C double bonds is of special interest in organic synthesis. In particular, the catalytic asymmetric dihydroxylation (AD) of alkenes has attracted considerable attention due to the facile transformation of the chiral diol products into valuable derivatives. By chemical means, the metal-catalyzed AD of olefins provides both stereo- and regiospecific cis-diol moieties. Next to their toxicity, however, these metal catalysts can also lead to byproduct formation as a result of oxidative fission. In nature, Rieske non-heme iron oxygenases (ROs) represent promising biocatalysts for this reaction since they are the only enzymes known to catalyze the stereoselective formation of vicinal cis-diols in one step. ROs are key enzymes in the degradation of aromatic hydrocarbons and can target a wide variety of different arenes. Despite their broad substrate scope, limited data is available for the conversion of unnatural substrates by this class of enzymes. To explore their potential for alkene oxidation, three ROs were tested for the oxyfunctionalization of a set of structurally diverse olefins including linear and cyclic arene-substituted alkenes, cycloalkenes as well as several terpenes. Naphthalene- (NDO), benzene- (BDO) and cumene dioxygenases (CDO) from different Pseudomonas strains where selected as they are amongst the RO enzymes that have already been reported to catalyze the oxidation of a small number of olefins. The majority of compounds from the selected substrate panel could be converted by NDO, BDO or CDO and products were either isolated and identified by NMR analysis or using the authentic standards. Dependent on the substrate, allylic monohydroxylation was found in addition to the corresponding diol products, a reaction which is chemically still most reliably achieved by the use of SeO2 in stoichiometric amounts. However, having been evolved for the dihydroxylation of aromatic compounds, wild type ROs displayed low conversions (< 50%) and modest stereoselectivities (≤ 80% ee/de) for several of the tested olefins. To overcome these limitations, changes in the active site topology of RO catalysts were introduced. A single targeted point mutation that was identified based on sequence and structural comparisons with other members of the RO family proved to be sufficient to generate BDO and CDO variants displaying remarkable changes in regio- and stereoselectivity for various substrates. In particular biotransformations with CDO M232A gave excellent stereoselectivities (≥ 95% ee/de) and good activities (> 90%) also for linear alkenes, which have been reported to be challenging substrates for RO-catalyzed oxyfunctionalizations. Site-saturation mutagenesis at position 232 in CDO revealed a correlation between the steric demand of the amino acid side chain and its influence on regio- and/ or stereoselectivities for styrene and indene. While the wild type enzyme almost exclusively catalyzed the dihydroxylation of the aromatic ring, the regioselectivity was shifted with decreasing side chain size to the terminal vinyl group of styrene, yielding up to 96% of the alkene-1,2-diol. For cis-1,2-indandiol formation, enantiocomplementary enzymes could be generated, a fact further highlighting the importance of position 232 for the engineering of ROs. Moreover, site-saturation mutagenesis of additional residues in the substrate binding pocket of CDO (F278, I288, I336 and F378) identified further positions having an influence on selectivity and product formation for alkene oxidation. To proof the applicability of ROs for organic synthesis, semi-preparative scale biotransformations (70 mg) of selected substrates were performed with CDO M232A. Without further optimization of the reaction set-up, products were successfully isolated in > 30% yield. In addition, up-scaling of (R)-limonene hydroxylation to 4 L in a bioreactor with growing cells gave final isolated product titers of 0.4 g L-1 even though substrate volatility and product toxicity diminished the yield. In conclusion, these examples demonstrated that a single point mutation was sufficient to transform CDO wild type into an efficient catalyst, furthermore constituting the first example of the rational engineering of CDO and BDO enzymes for the oxyfunctionalization of a broad range of alkenes.Item Open Access Charakterisierung umweltneutraler, natürlicher eisenhaltiger Sauerstoffträger für Chemical-Looping-Combustion (CLC)-Kraftwerke(2018) Schopf, Alexander; Massonne, Hans-Joachim (Prof. Dr.)Chemical Looping Combustion (CLC) ist eine großtechnische Verbrennungstechnologie zur Stromerzeugung mittels Wirbelschichtreaktoren unter Verwendung von Feststoffen anstelle von Luft als Sauerstoffträger. CLC zählt zu den CO2-Sequestrierungsverfahren für Carbon Dioxide Capture and Storage (CCS). Das Rauchgas besteht hauptsächlich aus Wasserdampf und Kohlenstoffdioxid, die Produktion von Stickoxiden wird prozessbedingt vermieden, der Wirkungsgradverlust liegt bei theoretisch 2 bis 3 %. Das bislang als Sauerstoffträger für CLC verwendete Mineral Ilmenit ist im Vergleich mit anderen Erzen relativ selten. Synthetisch hergestellte Sauerstoffträger sind dagegen teurer und daher unwirtschaftlich. Ziel der Arbeit war die Identifikation umweltneutraler natürlicher Sauerstoffträger für CLC-Kraftwerke die sowohl gut verfügbar sind als auch wirtschaftliche Alternativen darstellen. Für die Untersuchungen wurden die Gütekriterien der Effektivität für CLC und Kraftwerkseignung zu Grunde gelegt: gute Abriebfestigkeit, hohe Reaktivität mit Brenngasen bei 900 °C, insbesondere Methan, hohe Sauerstofftransportkapazität mit ca. 10 % Masseverlust bei der Reduktion, hohe Reaktivität mit Luftsauerstoff bei der Oxidation und eine Temperaturstabilität von mindestens 1000 °C unter oxidierenden Bedingungen. Weiteres Forschungsziel war die Aufklärung der ablaufenden Prozesse der Reduktions- bzw. Oxidations-Reaktionen bei den einzelnen Sauerstoffträgern unter simulierten Kraftwerksbedingungen. Mit der Entwicklung eines systematischen, für alle Sauerstoffträger anwendbaren, Untersuchungsgangs wurde eine fundamentale Methode zur Visualisierung der inhärenten chemischen Reaktionen bei wiederholender sukzessiver Reduktion und Oxidation geschaffen. Die experimentelle Versuchsabfolge gliederte sich in vier Teile: Vorbereitung und mineralogische Untersuchung zur Beschreibung des Ausgangsmaterials, Vorstudie zur Überprüfung der Temperaturstabilität von 1000 °C in der Thermowaage (TGA), Hauptstudie mit Simulation von CLC in der TGA und eine Vergleichsstudie unter Kraftwerksbedingungen im Versuchskraftwerk des Instituts für Feuerungs- und Kraftwerkstechnik der Universität Stuttgart zur Korrelation der Ergebnisse der Hauptstudie. Unter ihrer Anwendung wurden die hier einbezogenen Proben charakterisiert, wobei sich sieben von 12 Proben der Hauptstudie (aufgrund der formulierten Anforderungskriterien) als Sauerstoffträger besonders geeignet erwiesen: Magnetiterz, Maphopha (RSA), Magnetiterz, Thạch Khê (SGA), Roter Glaskopf, Toulkine (IMI), MIOX ME400, Waldenstein (KMI), Hämatiterz, Norwegen (DH), Bändereisenerz, Bogalatladi (RSA) und Ilmeniterz, Capel (IFK). Bei sehr lang gewählten Reduktionszeiten mit Brenngas entstanden zudem Varietäten des Kohlenstoffs, wie bspw. amorpher Kohlenstoff, Graphit und Graphen, als Abscheidung aus der Gasphase auf den Sauerstoffträgeroberflächen. Dies gibt Anlass zu weiteren Forschungen.Item Open Access Spectroscopic investigations of the magnetic anisotropy of lanthanide- and cobalt-based molecular nanomagnets(2016) Rechkemmer, Yvonne; Slageren, Joris van (Prof. Dr.)Single-molecule magnets are metal complexes exhibiting an energy barrier for spin reversal, leading to magnetic bistability and slow relaxation of the magnetization. Their potential for practical applications such as high-density magnetic data storage was recognized early on and with the goal of achieving high energy barriers, different kinds of single-molecule magnets have been synthesized. The quadratic dependence of the barrier height on the spin motivated chemists to synthesize metal complexes with very high total spins; however, with limited success. It was shown that high spins come along with low anisotropies and increased interest thus focused on the synthesis and investigation of (mononuclear) complexes of highly anisotropic metal centers, e.g. lanthanide or cobalt complexes. Although rather high energy barriers can be achieved in such systems, practical application remains problematic and has not been realized yet. Reasons are for example the lack of rational design criteria and the complex interplay of different magnetic relaxation pathways. The aim of this work was therefore the comprehensive magnetic and spectroscopic investigation of selected molecular lanthanide and cobalt compounds in order to obtain a deeper insight into the correlation of molecular and electronic structures as well as the corresponding magnetic properties. The applied spectroscopic methods included electron paramagnetic resonance spectroscopy, far-infrared spectroscopy and optical methods. Special emphasis was placed on magnetic circular dichroism (MCD) spectroscopy, which served as a main tool for electronic structure determination. However, since the MCD-spectrometer was not part of the available experimental equipment at the University of Stuttgart, its design, setup and characterization were the first part of this work. In the further course of this work MCD-spectroscopy was employed for the electronic structure determination of selected lanthanide and cobalt compounds. The studied lanthanide compounds were literature-known molecular tetra-carbonates of erbium (1-Er) and dysprosium (1-Dy). Detailed magnetometric studies showed that both 1-Er and 1-Dy are field-induced single-molecule magnets; however, 1-Er and 1-Dy show significant differences in their magnetic relaxation behavior. The magnetic studies were complemented by detailed spectroscopic investigations.The combination of far-infrared-, luminescence- and MCD-spectroscopy allowed for the experimental determination of 48 energy levels for 1-Er and 55 levels for 1-Dy, which built the foundation for the subsequent crystal field analysis and electronic structure determination. In addition, the results of EPR-spectroscopic studies were used for fine-tuning and verifying the respectively determined crystal field parameters. Calculating the magnetic dipole strengths for transitions between the relevant states led to a quantitative understanding of the magnetic relaxation pathways. Besides the investigation of lanthanide compounds, this thesis deals with two classes of cobalt complexes. The first class comprises mononuclear complexes in which one Co(II) ion is ligated by the nitrogen donors of two doubly deprotonated 1,2-bis(methanesulfonamido)-benzene-ligands. Rather acute N-Co-N bite angles indicate strong deviations from ideal tetrahedral symmetry. The static magnetic properties hint at very high energy barriers for spin reversal and with the help of far-infrared spectroscopy, largely negative axial zero-field splitting parameters were determined. The corresponding energy barriers belong to the highest ever reported for 3d-transition metal complexes and investigating the dynamic magnetic properties confirmed single-molecule magnet behavior. The unique magnetic properties were fully explained by analyzing spectroscopic results. The MCD-spectra showed intense signals that were assigned to spin-allowed d-d-transitions. Subsequent crystal field analysis revealed that the strong axial crystal field generated by the ligands leads to a large splitting of the electronic terms and thus in turn to a relatively small energy gap between the electronic ground state and the first excited state. The resulting increase in second-order spin-orbit coupling explains the high energy barriers observed in the studied complexes. The second class of cobalt compounds studied in this work included dimers of distorted octahedrally coordinated Co(II) ions bridged by symmetrical or asymmetrical quinone based bridging ligands. The main focus of investigation lay on the impact of the bridging ligand on the magnetic coupling between the cobalt centers. Thus, the magnetic properties of the complexes were studied with the help of static susceptibility and magnetization measurements and analyzed by means of different models. Depending on the bridging ligand, different signs for the exchange coupling constants were found. The varying signs can be explained by different relative contributions of possible exchange paths, influenced by the different substituents at the bridging ligands or slight geometry differences. The observations indicate that electron withdrawing substituents favor ferromagnetic couplings, which are preferred in the context of molecular magnetism. All in all, it can be concluded that this work provides a contribution to the deeper understanding of the features relevant for single-molecule magnets. The electronic structure determination for selected lanthanide and cobalt complexes applying advanced magnetometric and spectroscopic techniques not only led to an understanding of the static and dynamic magnetic properties but also allowed for the development of design criteria and new approaches for improved single-molecule magnets in the future.Item Open Access Modeling and simulation of closed low-pressure adsorbers for thermal energy storage(2019) Schäfer, Micha; Thess, André (Prof. Dr. rer. nat.)Closed low-pressure adsorption systems can be applied for thermal energy storage. Their performance is determined by the mass and heat transport processes in the adsorber. Therefore, thorough knowledge of these transport processes is required for further storage development. The present thesis contributes to this by providing detailed models of closed low-pressure adsorbers and by conducting simulations over a broad range of parameters and configurations. The focus is on adsorbers of larger scale (length L = 0.1 . . . 1 m) and on the discharging process. As the adsorption pair, binderless zeolite 13X with water is examined. The models are developed in a stepwise manner from pore to storage scale. The Finite-Difference-Method is implemented to numerically solve the models. Simulations are conducted for defined reference cases as well as over a broad range of geometric and process parameters. The reference cases are analyzed in detail to gain a better understanding of the transport processes. Furthermore, the results are analyzed with respect to two particular modeling aspects: equilibrium assumptions and rarefaction effects (e. g. slip effect). With respect to the application, the discharging performance is analyzed in terms of thermal power and a defined discharging degree. Both the adsorber and the adsorbent configurations are varied. In addition, the effect of the discharging conditions is evaluated. Finally, one exemplary charging process is examined. The detailed analysis of the reference cases reveals that the mass and heat transport and the adsorption processes are strongly coupled and can only be understood in their interaction. For onedimensional adsorber configurations, that is the mass and heat transport are in the same direction, the discharging process is generally limited by the heat transport. This leads to insufficient thermal power and unsuitable discharging durations of up to one year. In contrast, for two-dimensional adsorber configurations, that is the mass and heat transport are in perpendicular directions, the discharging process can be limited either by the mass or heat transport or by the adsorption. The limitation depends on the configuration of the adsorber and adsorbent. Moreover, the twodimensional adsorber configurations can provide sufficient thermal power. With respect to the modeling, it is found that the assumption of a uniform pressure distribution is applicable for one-dimensional adsorber configurations. In contrast, for two-dimensional configurations, no equilibrium assumptions can be applied in general. However, for powder adsorbent it is always valid to assume local adsorption equilibrium. Regarding the rarefaction effects in twodimensional adsorber configurations with honeycombs and granules, the slip effect is relevant for small channel and particle diameters (d = 1 mm). For adsorbers with powder adsorbent, the reduction of the effective heat conductivity due to the rarefaction effect becomes relevant. With respect to the application, the variation of the adsorber configuration shows that the volumetric thermal power generally decreases with increasing adsorber length. Furthermore, the power decreases with increasing width between the parallel heat exchanger plates in the adsorber. Regarding the adsorbent configuration in two-dimensional adsorber configurations, it is found that the volumetric thermal power can be optimized by variation of the channel or particle diameter. Interestingly, the optima for peak and mean power do not coincide. In addition, the discharging degree is found to strongly depend on the discharging conditions in terms of discharging temperature and volume flow of the heat transfer fluid extracting the heat from the adsorber. In general, the discharging degree decreases with increasing discharging temperature. Similarly, the discharging degree decreases with increasing volume flow of the heat transfer fluid. Finally, the analysis of an exemplary charging process revealed that the pressure in the adsorber can increase significantly (> 50%) due to the desorption.Item Open Access Untersuchungen zur Derivatisierung und Charakterisierung Carben-analoger N-heterozyklischer Halogenarsane(2021) Bender, Johannes; Gudat, Dietrich (Prof. Dr. Dr.)Die Chemie neutraler N-heterozyklischer Arsane konnte durch Synthese einer Reihe von Verbindungen mit funktionellen Substituenten am Arsen (Halogeno-, Pseudohalogeno-substituiert) erweitert sowie strukturelle und elektronische Verhältnisse aufgeklärt werden. Aus 2-Chloro-1,3,2-Diazaarsolidinen und -1,3,2-Diazaarsolenen konnten einige neue kationische Arsen-Analoga von N-heterozyklischen Carbenen hergestellt werden. Des Weiteren konnten noch unbekannte 2-Thiolato- und 2-Xanthogenato-1,3,2-Diazaarsolidine und -1,3,2-Diazaarsolene dargestellt und charakterisiert werden.Item Open Access Miscibility, viscoelastic reinforcement, and transport properties of blend membranes based on sulfonated poly(phenylene sulfone)s(2021) Saatkamp, Torben; Maier, Joachim (Prof. Dr.)Chemical energy that hydrogen may generate during combustion and the corresponding electrical energy are interconvertible by means of a fuel cell (FC) and by the electrolysis of water (WE), which allows for the utilization of the complementary nature of these two key energy vectors towards energy sustainability. A proton exchange membrane (PEM) made from an ionomer is commonly employed as the electrolyte in mobile fuel cell applications and in water electrolyzers that require dynamic operability and pressurized product gases. New PEM materials are needed to increase performance, reduce environmental impact, and allow for a more targeted design of PEMFC and PEMWE systems, all of which is in some way limited by the use of the established perfluorosulfonic acid (PFSA) type ionomers. This work’s focus lies on sulfonated poly(phenylene sulfone)s (sPPS), a unique group of fluorine-free cation conducting ionomers. They are unique in terms of their chemical stability and transport properties, however, typical in terms of their salt-like brittleness in the dry state and extensive swelling at high humidity and in water. To make the unique properties of sPPS available in application, the goal of this work is to take a comprehensive approach to their viscoelastic reinforcement. Therefore, the structure of this thesis entails three related aspects along the process from pure materials to the optimization of robust PEMs for application. The first chapter focuses on the optimization of the intrinsic viscoelastic properties of a particularly suited sPPS (termed S360, with IEC 2.78 meq g-1, EW 360 g mol-1) which lays the groundwork for reliable and systematic further development. To achieve this, relevant properties of S360 are first characterized and viscoelastic shortcomings as seen in water uptake measurements and tensile tests under dry conditions (≤ 30% relative humidity, RH) discussed. The step-growth polymerization of S360 is optimized after finding significant inorganic contamination retained in the established purification process of the widely used monomer sulfonated difluorodiphenyl sulfone (sDFDPS), allowing for the preparation of the ionomer in reproducible high molecular weight. Relevant properties of high molecular weight S360 are characterized and an enhancement of mechanical properties at 30% RH as well as when submerged in water is found. Access to reproducible high quality of S360 enables its first-time use and study as a PEM in a completely fluorine-free WE cell. At 80 °C, record performance amongst fluorine free electrolytes in PEMWEs of 3.48 A cm-2 at 1.8 V is achieved, showcasing the potential of sPPS for application. The second chapter entails the identification and better understanding of a suitable and versatile reinforcement concept for creating robust membranes based on sPPS. To achieve this, the established homogeneously miscible acid-base polymer blends of sulfonated ionomers with poly(benzimidazole) (PBI, and its derivatives PBIO and PBIOO) are discussed in-depth and chosen for later systematic optimization in combination with sPPS. Since the origin of miscibility in PBI blends with sulfonated ionomers is insufficiently described in literature and could facilitate targeted design of new blend components, a model acid-base polymer blend system comprising pyridine-functionalized poly(sulfone) (PSU) is created. Pyridine groups of different basicity tethered to PSU in varying concentration are used to investigate the effect that interpolymer acid-base interaction strength and concentration have on miscibility in blends with 80 wt% S360, as derived from the blend membranes’ cross-sectional SEMs. High mutual compatibility is achieved at high concentration of weak interpolymer interaction, which is interpreted with regards to the observed miscibility in PBI blends. Based on the derived role that hydrogen bonds may play in PBI blends, the difference of interpolymer interaction in solution (during membrane formation) and in the dry membrane is described. This could enable the development of new blend concepts in the future. An exemplary miscible blend that comprises interpolymer hydrogen bonds only in solution but not in the final membrane is shown. The third chapter describes the optimization and balance of properties in the previously described polymer blends with PBIO, following the goal to prepare membranes which can be evaluated in fuel cells and fabricated on a wider scale in order to bring the attractive properties of sPPS into application. To achieve this, S360-blend membranes of varying PBIO content are characterized with regard to conductivity and mechanical properties in various conditions. High mechanical robustness is achieved in S360 blends with 30 wt% PBIO but is accompanied by dramatic reduction of conductivity, due to the charge-consuming acid-base interaction. The findings are translated into blends with fully sulfonated sPPS (termed S220, with IEC 4.54 meq g-1, EW 220 g mol-1) which allows for the creation of membranes that combine mechanical toughness with high conductivity at a ratio of 25 wt% PBIO in S220, making the material suited for production on a commercial casting line and fuel cell testing. Membranes based on S360 that comprise 15 wt% PBIO are designated for further studies in PEMWEs, where membrane requirements differ significantly from that in PEMFCs, highlighting the versatility of the reinforcement approach chosen in this work. Finally, first fuel cell tests of thin spray coated PBIO blend membranes are conducted, and initial durability testing of sPPS-based membranes in fuel cells is possible. Overall, the results presented in this work are strongly interrelated which underlines the importance of comprehensiveness in the successful viscoelastic reinforcement of sulfonated poly(phenylene sulfone)s. Ultimately, the blend membranes resulting from this work can be used as a platform for further development of sPPS-based PEMs in the future.Item Open Access Novel X-ray lenses for direct and coherent imaging(2019) Sanli, Umut Tunca; Schütz, Gisela (Prof. Dr.)Item Open Access Template controlled mineralization of functional ZnO thin films(2017) Blumenstein, Nina; Bill, Joachim (Prof. Dr.)In this thesis, the influence of different organic templates on the bioinspired deposition of ZnO thin films is investigated. Depending on the polarity of the templates, the growth and the properties of the films can be influenced. On a non-polar template, film growth is inhibited whereas homogeneous films grow on polar templates. Additionally, it was shown that on a template with high polarity a crystallographic texture is observed. This leads to a macroscopically measurable piezoelectric response of these samples. In the last part of this work, the incorporation of Al, Ga and In into the ZnO films was investigated. Measurements showed a blue shift of the UV photoluminescence emission and an improved electrical conductivity with increasing doping content.Item Open Access Enzymatische Hydratisierung kurzkettiger Fettsäuren und Alkene(2018) Demming, Rebecca M.; Hauer, Bernhard (Prof. Dr.)