Universität Stuttgart

Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1

Browse

Filters

2018 - 20202

Settings

Institute: search.filters.UBSInstitut.Institut für MaterialwissenschaftAuthor: search.filters.author.Hadjixenophontos, Efi

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    Hydrogen transport in thin films : Mg-MgH2 and Ti-TiH2 systems
    (2018) Hadjixenophontos, Efi
    Hydrogen storage has become progressively important due to increasing energy demand. Magne-sium (Mg/MgH2) is one of the most promising elements of hydrogen uptake, however, the slow kinetics and need for high temperatures during dehydrogenation make this material challenging for mobile applications. Meanwhile, Titanium (Ti/TiH2/TiO2) draws attention due to its catalytic effect in hydrogenation of other metals with higher capacities. A comprehensive way to quantitatively char-acterize the kinetics of hydride formation in both systems (Mg and Ti) is shown here. A technique allowing a large range of pressures and temperatures (room temperature to 300 °C and from 0.05 bar up to 100 bar) is developed successfully. Thin films (50-1000 nm), deposited by ion beam sput-tering (PVD), are used because of their smooth surface and defined structure. In order to study hydrogen transport precisely, X-ray diffraction (XRD), electron microscopy (SEM/FIB/TEM) and electric resistance measurements are used. In the case of Mg, while a Pd coating is used as catalyst, the hydride is formed from the surface towards the substrate and transformation in the morpholo-gy is observed. Parabolic law is followed and the diffusion coefficient of hydrogen in MgH2 is ob-tained at room temperature (2.67 · 10-17 cm2/s). Additionally, a model is created to fit the experi-mental change in resistance during hydrogen loading and shows the changes in the behavior of thicker layers. The interface between Pd/Mg is discussed, since Mg5Pd2 and Mg6Pd are formed at high temperatures and are most dominant over dehydrogenation. However, at room temperature, this interface appears to be more stable. The activation energy of hydrogenation is calculated ex-perimentally from an Arrhenius plot to be equal to Ea = 22.6 ± 2.0 kJ/mol and the pre-factor D0 = 3904 cm2/s. Additional attention is given to magnesium hydride as an anode electrode in Li-ion bat-teries. TEM investigations of thin film electrodes demonstrate the complete lithiation of the mate-rial however, with drastic volume changes, leading to bad reversibility. In Ti the thin oxide layer naturally formed on the surface, appears to play a dominant role in the kinetics of hydrogen transport leading to a linear kinetics. A pressure dependency is observed, while an experimental evaluation of the permeation coefficient in the oxide is also discussed. Important information on the hydrogen transport is obtained in both systems, giving an input for further improvements of such hydrides.
  • Thumbnail Image
    ItemOpen Access
    A review of the MSCA ITN ECOSTORE : novel complex metal hydrides for efficient and compact storage of renewable energy as hydrogen and electricity
    (2020) Hadjixenophontos, Efi; Dematteis, Erika Michela; Berti, Nicola; Wołczyk, Anna Roza; Huen, Priscilla; Brighi, Matteo; Le, Thi Thu; Santoru, Antonio; Payandeh, Seyed Hosein; Peru, Filippo; Dao, Anh Ha; Liu, Yinzhe; Heere, Michael
    Hydrogen as an energy carrier is very versatile in energy storage applications. Developments in novel, sustainable technologies towards a CO2-free society are needed and the exploration of all-solid-state batteries (ASSBs) as well as solid-state hydrogen storage applications based on metal hydrides can provide solutions for such technologies. However, there are still many technical challenges for both hydrogen storage material and ASSBs related to designing low-cost materials with low-environmental impact. The current materials considered for all-solid-state batteries should have high conductivities for Na+, Mg2+ and Ca2+, while Al3+-based compounds are often marginalised due to the lack of suitable electrode and electrolyte materials. In hydrogen storage materials, the sluggish kinetic behaviour of solid-state hydride materials is one of the key constraints that limit their practical uses. Therefore, it is necessary to overcome the kinetic issues of hydride materials before discussing and considering them on the system level. This review summarizes the achievements of the Marie Skłodowska-Curie Actions (MSCA) innovative training network (ITN) ECOSTORE, the aim of which was the investigation of different aspects of (complex) metal hydride materials. Advances in battery and hydrogen storage materials for the efficient and compact storage of renewable energy production are discussed.