Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
58 results
Search Results
Item Open Access Precipitation of nitrides in iron-based binary and ternary alloys; influence of defects and transformation-misfit stresses(2015) Akhlaghi, Maryam; Mittemeijer, Eric Jan (Prof. Dr. Ir.)The initial microstructure of the unnitrided specimen has a significant influence on the nitriding response of binary Fe-Me (Me: Mo or Al) alloys specimens. This effect was not investigated until now for the case of nitrided ternary Fe-Me1-Me2 alloys, the role of the initial microstructure was studied upon nitriding Fe-4.1 at.% Cr-7.9 at.% Al specimens. To this end, the recrystallized and cold-rolled specimens were nitrided at low nitriding temperature of 400 °C. Upon precipitation of misfitting coherent nitrides during nitriding of thin-foils of binary Fe-Me (Me: Cr and V) alloys, a hydrostatic tensile lattice-stain component results from the elastic accommodation of volume misfit of nitrides and ferrite matrix. The change of the ferrite-matrix lattice parameter can be traced upon precipitation of the nitrides by X-ray diffraction measurements. The theory originally developed for the case of imperfections (by Eshelby) in solids can be applied for quantitatively describing the lattice-parameter changes of the matrix, the nitrides and the aggregate (matrix+ nitrides) as function of volume fraction and type of nitrides.Item Open Access Formation of lath martensite(2015) Löwy, Sarah; Mittemeijer, Eric Jan (Prof. Dr. Ir.)In this thesis the formation of different lath martensites was investigated upon cooling, particularly with regard to the mechanisms contributing to the transformation process. Upon very slow cooling of different Fe-Ni alloys and a maraging steel, all forming lath martensite, a discontinuous transformation behaviour was observed. This modulation of the transformation rate is ascribed to the interplay of chemical driving force, developing strain energy and its relaxation upon slow cooling. It is proposed that the modulation is caused by simultaneous formation of blocks in different martensite packages. Additionally, the influence of the Ni content on the transformation behaviour is presented as well as the influence of an externally applied force.Item Open Access Efficient approach to compute melting properties fully from ab initio with application to Cu(2017) Zhu, Li-Fang; Grabowski, Blazej; Neugebauer, JörgApplying thermodynamic integration within an ab initio-based free-energy approach is a state-of-the-art method to calculate melting points of materials. However, the high computational cost and the reliance on a good reference system for calculating the liquid free energy have so far hindered a general application. To overcome these challenges, we propose the two-optimized references thermodynamic integration using Langevin dynamics (TOR-TILD) method in this work by extending the two-stage upsampled thermodynamic integration using Langevin dynamics (TU-TILD) method, which has been originally developed to obtain anharmonic free energies of solids, to the calculation of liquid free energies. The core idea of TOR-TILD is to fit two empirical potentials to the energies from density functional theory based molecular dynamics runs for the solid and the liquid phase and to use these potentials as reference systems for thermodynamic integration. Because the empirical potentials closely reproduce the ab initio system in the relevant part of the phase space the convergence of the thermodynamic integration is very rapid. Therefore, the proposed approach improves significantly the computational efficiency while preserving the required accuracy. As a test case, we apply TOR-TILD to fcc Cu computing not only the melting point but various other melting properties, such as the entropy and enthalpy of fusion and the volume change upon melting. The generalized gradient approximation (GGA) with the Perdew-Burke-Ernzerhof (PBE) exchange-correlation functional and the local-density approximation (LDA) are used. Using both functionals gives a reliable ab initio confidence interval for the melting point, the enthalpy of fusion, and entropy of fusion.Item Open Access Genetisch modifizierte Biotemplate zur Erzeugung von Zr-basierten Nanomaterialien(2019) Eisele, Rahel; Bill, Joachim (Prof. Dr.)In Biomineralisationsprozessen aus der belebten Natur scheiden sich anorganische Materialien auf organischen Templaten (Biomakromoleküle) ab. Funktionelle Gruppen der Makromoleküle steuern dabei die Abscheidung aus einer wässrigen Lösung sowie die Strukturierung des anorganischen Materials. Dabei sind spezifische Wechselwirkungen zwischen dem organischen Templat und dem anorganischen Material von Bedeutung. Die Materialbildung findet unter Umgebungsbedingungen in wässrigen Systemen statt. Für technisch interessante Materialien wie Zirkoniumdioxid (ZrO2) stellt die energieeffiziente Herstellung präziser Nanostrukturen eine technische Herausforderung dar. Daher wurden im Rahmen dieser Arbeit die Prinzipien der Biomineralisation auf die Herstellung von Zirkonium-basiertem Material (ZrbM) übertragen. Hierzu gehörte die Materialbildung durch Mineralisation aus einer ZrOCl2-Lösung sowie eine gezielte Mineralisation auf bioorganischen M13-Bakteriophagentemplaten. Um die „biologische Spezifität“ in Biomineralisationsprozessen auf die Bildung von ZrbM zu übertragen, wurden Peptide mittels Phagen-Display identifiziert, die spezifisch an ZrO2 binden. Mittels genetischer Modifikation wurden diese ZrO2 Bindepeptide auf der Phagenoberfläche präsentiert. Hierdurch wurde eine hohe Bindepeptiddichte und damit viele Interaktionspunkte zum anorganischen Material erzielt. Bevor der Einfluss dieser Bindepeptide auf die Mineralisation von ZrbM untersucht werden konnte, wurde zunächst der Partikelbildungs- und Partikelwachstumsprozess von ZrbM in einer ZrOCl2-Lösung und einem Ethanol-Wasser Lösungsmittelgemisch bei verschiedenen System- und Prozessparametern beschrieben. Auf Grundlage dieser Ergebnisse wurde eine Mineralisationslösung etabliert mit der der Einfluss der Bindepeptide - präsentiert auf der Phagenoberfläche - auf die Mineralisation von ZrbM untersucht werden konnte. Die Bindepeptide zeigten einen deutlichen Einfluss auf die Mineralisation von ZrbM. Im Vergleich zu Bakteriophagen ohne Bindepeptid wurde mit den genetisch modifizierten Bakteriophagen eine deutlich höhere Abscheiderate erzielt. Dieser Einfluss der Bindepeptide wurde auf Hydroxygruppen in Serineinheiten zurückgeführt. Diese führen zum einen zu einer starken Anziehung von molekularen Zr-Spezies an das Biotemplat. Zum anderen induzieren die Hydroxygruppen die heterogene Keimbildung von ZrbM durch Kondensationsreaktionen zwischen dem Biotemplat und molekularen Zr-Spezies. Somit ist es nun möglich genetisch kontrolliert Zr-basierte Nanomaterialien zu mineralisieren. Im Rahmen dieser Arbeit gelang es nicht nur einzelne Phagen zu mineralisieren, sondern auch dünne homogene Schichten aus ZrbM. Diese ZrbM-Schichten wurden im letzten Teil dieser Arbeit vergleichend zu Phagenschichten und SiO2-Schichten auf die Adhäsion von Staphylococcus aureus (S. aureus) getestet. S. aureus ist ein pathogenes Bakterium, welches zur Bildung von Biofilmen, zum Beispiel auf Implantaten, und dadurch zu einem Implantatverlust bis hin zu lebensbedrohlichen Komplikationen führen kann. Die Biofilmbildung kann effektiv unterbunden werden, indem die Bakterienadhäsion auf Oberflächen verhindert wird. Daher wurde im Rahmen dieser Arbeit untersucht, ob bestimmte chemische Oberflächen, das heißt bestimmte Materialien oder auch bestimmte funktionelle Gruppen, die Bakterienadhäsion unterdrücken können. Die Untersuchung der Bakterienadhäsion auf den verschiedenen Oberflächen ergab, dass auf der Phagenschicht im Vergleich zur SiO2-Schicht und einer Schicht aus ZrbM eine sehr geringe Bakterienadhäsion vorlag. Untersuchungen verschiedener Einflussfaktoren auf die Bakterienadhäsion zeigten, dass die Bakterienadhäsion an der SiO2-Schicht und der ZrbM-Schicht durch die Oberflächenrauigkeit, die Hydrophobizität und die Oberflächenladung beeinflusst werden kann. Bei der Phagenschicht korrelierten weder die Oberflächenladung, noch die Oberflächenrauigkeit und die Hydrophobizität im Vergleich zu den anorganischen Materialoberflächen mit der Bakterienadhäsion. Dies ließ darauf schließen, dass die geringe Bakterienadhäsion auf der Phagenschicht auf die biochemische Zusammensetzung der Hüllproteine, vor allem auf die Abwesenheit spezifischer Bindedomänen (Ligand-Rezeptor-Wechselwirkungen), zurückzuführen ist.Item Open Access Peptide controlled shaping of biomineralized tin(II) oxide into flower-like particles(2019) Kilper, Stefan; Jahnke, Timotheus; Wiegers, Katharina; Grohe, Vera; Burghard, Zaklina; Bill, Joachim; Rothenstein, DirkThe size and morphology of metal oxide particles have a large impact on the physicochemical properties of these materials, e.g., the aspect ratio of particles affects their catalytic activity. Bioinspired synthesis routes give the opportunity to control precisely the structure and aspect ratio of the metal oxide particles by bioorganic molecules, such as peptides. This study focusses on the identification of tin(II) oxide (tin monoxide, SnO) binding peptides, and their effect on the synthesis of crystalline SnO microstructures. The phage display technique was used to identify the 7-mer peptide SnBP01 (LPPWKLK), which shows a high binding affinity towards crystalline SnO. It was found that the derivatives of the SnBP01 peptide, varying in peptide length and thus in their interaction, significantly affect the aspect ratio and the size dimension of mineralized SnO particles, resulting in flower-like morphology. Furthermore, the important role of the N-terminal leucine residue in the peptide for the strong organic-inorganic interaction was revealed by FTIR investigations. This bioinspired approach shows a facile procedure for the detailed investigation of peptide-to-metal oxide interactions, as well as an easy method for the controlled synthesis of tin(II) oxide particles with different morphologies.Item Open Access Manganese-based cathode materials for Li-ion batteries(2015) Surace, Yuri; Weidenkaff, Anke (Prof. Dr.)Li-ion batteries are one of the most commercialized solutions to store electrochemical energy, but until now their broad use is limited to small electronic devices. Higher specific energy and longer cycle life are needed to open the way to a broader range of applications (i.e. electric vehicles or stationary batteries). The specific energy of Li-ion batteries is a function of the anode and cathode capacity for lithium intercalation and the cell voltage. However, capacity and voltage of current state-of-the-art cathode materials are the main specific energy-limiting factors of Li-ion batteries. For this reason, much of the attention during the past few years focused on cathode materials with either high voltage or high capacity or in the best of all cases both, coupled with high stability. Manganese is one of the most common transition metals used in battery materials due to its multiple (and at least partially accessible) oxidation states, its low toxicity and its high availability. Mn-based cathode materials benefit from the Mn3+/Mn2+ or Mn4+/Mn3+ redox couples which allow obtaining a potential range between 3.0 V and 4.2 V vs Li+/Li depending on the crystal structure and the chemical composition. The aim of this work was to study unexplored and scarcely explored Mn-based cathode materials and to improve their electrochemical performances through structural, morphological and chemical modifications. In the initial part of the thesis, a study of calcium manganite Ruddlesden-Popper phases Ca2MnO4 was carried out. Although the pristine material was not electrochemically active, Ca2MnO4 was activated for Li intercalation by Ca extraction using a novel and simple treatment with sulphuric acid. The influence of the amount of Ca extracted, and of the particle size were studied and correlated with the electrochemical properties. It was proposed that the acid treated materials had a bi-functional crystalline-amorphous structure, composed by a Ca2MnO4 crystalline bulk phase for the stability and an amorphous MnO2•xH2O surface for the electrochemical response. For each 25at% of calcium extracted, capacities of 40 Ah/kg and 55Ah/kg were obtained for micron-sized particles and for nano-sized particles, respectively. A stability improvement of a factor of 10 was reached in comparison to bare amorphous hydrated manganese oxide. The work focused then on Li3MnO4, a lithium rich phase containing manganese (V). Developing a novel freeze drying (FD) synthesis-route, the micro- and nanostructure of the material were modified with relevant consequences on the electrochemical properties. Smaller particles size in conjunction with smaller grains size allowed obtaining a first discharge capacity of 290 Ah/kg with an improvement of up to 31%, in comparison to Li3MnO4 synthesized by the solid state route. Moreover, measurements carried out at different cycling rates showed improvements in rate capability. In addition, this new route allowed reducing the re-action temperature and time. However, considerable modifications in the Li3MnO4 structure occurred during the first cycle and the capacity improvement vanished after a few cycles due to structural instability of this material under cycling. To gain deeper insight into the reason of the capacity fading of this material, a post mortem analysis was carried out which allowed to create a model for the degradation mechanism. Briefly, the lithium extraction or insertion in the structure caused the amorphization of the material with conversion to the more stable amorphous manganese oxide. In the last part of this thesis, preliminary studies on lithium manganese borate LiMnBO3 were carried out. It was shown in a proof of concept study that the FD synthesis was applicable for this material as well. Nanocrystalline material was obtained with electrochemical performance comparable to the state of the art by gaining in synthesis simplicity.Item Open Access Kinetics of phase transformations(2015) Rheingans, Bastian; Mittemeijer, Eric Jan (Prof. Dr. Ir.)In this thesis, the kinetics of heterogeneous solid-state phase transformations in different prototype experimental systems are investigated with focus on the development of new strategies for kinetic modelling using mean-field kinetic models. Topics cover the interrelation between the kinetic model description and the amount of available experimental information, the interpretation of kinetic model parameters determined upon model fitting and the coupling of kinetic models to external (thermodynamic) input data. Experimental studies include the crystallisation kinetics of metallic glasses and precipitation kinetics in supersaturated alloys.Item Open Access Migration mechanisms of a faceted grain boundary(2018) Hadian, Raheleh; Grabowski, Blazej; Finnis, Michael W.; Neugebauer, JörgWe report molecular dynamics simulations and their analysis for a mixed tilt and twist grain boundary vicinal to the Σ7 symmetric tilt boundary of the type {123} in aluminum. When minimized in energy at 0K, a grain boundary of this type exhibits nanofacets that contain kinks. We observe that at higher temperatures of migration simulations, given extended annealing times, it is energetically favorable for these nanofacets to coalesce into a large terrace-facet structure. Therefore, we initiate the simulations from such a structure and study as a function of applied driving force and temperature how the boundary migrates. We find the migration of a faceted boundary can be described in terms of the flow of steps. The migration is dominated at lower driving force by the collective motion of the steps incorporated in the facet, and at higher driving forces by the step detachment from the terrace-facet junction and propagation of steps across the terraces. The velocity of steps on terraces is faster than their velocity when incorporated in the facet, and very much faster than the velocity of the facet profile itself, which is almost stationary. A simple kinetic Monte Carlo model matches the broad kinematic features revealed by the molecular dynamics. Since the mechanisms seem likely to be very general on kinked grain-boundary planes, the step-flow description is a promising approach to more quantitative modeling of general grain boundaries.Item Open Access Interaction of carbon and nitrogen in iron(Stuttgart : Max-Planck-Institut für Intelligente Systeme (ehemals Max-Planck-Institut für Metallforschung), 2016) Göhring, Holger; Mittemeijer, Eric Jan (Prof. Dr. Ir.)Item Open Access Ab initio based method to study structural phase transitions in dynamically unstable crystals, with new insights on the β to ω transformation in titanium(2019) Korbmacher, Dominique; Glensk, Albert; Duff, Andrew Ian; Finnis, Michael W.; Grabowski, Blazej; Neugebauer, JörgWe present an approach that enables an efficient and accurate study of dynamically unstable crystals over the full temperature range. The approach is based on an interatomic potential fitted to ab initio molecular dynamics energies for both the high- and low-temperature stable phases. We verify by comparison to explicit ab initio simulations that such a bespoke potential, for which we use here the functional form of the embedded atom method, provides accurate transformation temperatures and atomistic features of the transformation. The accuracy of the potential makes it an ideal tool to study the important impact of finite size and finite time effects. We apply our approach to the dynamically unstable β (bcc) titanium phase and study in detail the transformation to the low-temperature stable hexagonal ω phase. We find a large set of previously unreported linear-chain disordered (LCD) structures made up of three types of [111]β linear-chain defects that exhibit randomly disordered arrangements in the (111)β plane.