Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
126 results
Search Results
Item Open Access Nanoscale mapping of magnetic auto-oscillations with a single spin sensor(2025) Hache, Toni; Anshu, Anshu; Shalomayeva, Tetyana; Richter, Gunther; Stöhr, Rainer; Kern, Klaus; Wrachtrup, Jörg; Singha, AparajitaSpin Hall nano-oscillators convert DC to magnetic auto-oscillations in the microwave regime. Current research on these devices is dedicated to creating next-generation energy-efficient hardware for communication technologies. Despite intensive research on magnetic auto-oscillations within the past decade, the nanoscale mapping of those dynamics remained a challenge. We image the distribution of free-running magnetic auto-oscillations by driving the electron spin resonance transition of a single spin quantum sensor, enabling fast acquisition (100 ms/pixel). With quantitative magnetometry, we experimentally demonstrate for the first time that the auto-oscillation spots are localized at magnetic field minima acting as local potential wells for confining spin-waves. By comparing the magnitudes of the magnetic stray field at these spots, we decipher the different frequencies of the auto-oscillation modes. The insights gained regarding the interaction between auto-oscillation modes and spin-wave potential wells enable advanced engineering of real devices.Item Open Access High quality graphene for magnetic sensing(2022) Herlinger, Patrick; Smet, Jurgen (Dr.)In this thesis, we investigated the reliable fabrication of high quality graphene and its use as Hall transducer material. Charged impurities and random strain fluctuations were identified as main culprits that deteriorate the electrical properties of graphene devices. It was shown that these extrinsic sources of disorder can be reduced through optimized device processing steps as well as the use of a proper substrate material for graphene such as hexagonal boron nitride (hBN). This insulating material is atomically flat and possesses a very low intrinsic density of charged impurities. By performing Raman spectroscopy and electrical transport measurements, both without and with applied magnetic field, on a large number of different types of graphene devices, it was demonstrated that the encapsulation of graphene between hexagonal boron nitride thin films is the best way to obtain high quality graphene devices. However, even for these hBN-encapsulated devices, we still observed a notable sample-to-sample variation of the electrical properties. Therefore, we developed a post-processing technique that allows us to improve the electrical properties of such devices both significantly and reliably. Since our technique is applied after device fabrication, we could also demonstrate its beneficial effect by comparing one and the same device before and after treatment. We then assessed the application of such high quality graphene as Hall transducer material. The dependencies on and between all relevant operating parameters were explored. This allowed us to develop a deep understanding and empirical model for graphene Hall elements, including the interplay between thermal and 1/f noise in these devices. All key performance indicators for Hall sensors were measured and their typical values reported. For comparable device dimensions, hBN-encapsulated graphene Hall elements were found to have the potential to become a strong competitor to existing materials that are used in today's commercial Hall sensors. Unfortunately, the large-scale fabrication of hBN thin films still remains an unresolved challenge for the industrialization of large area, high quality graphene Hall elements. Also, the Si CMOS integration demands further development. Even though the application of graphene in Hall devices is promising, as shown in this work, this use case alone does likely not justify the significant efforts and investments we expect to be necessary to industrialize the fabrication of high quality graphene devices. Instead, these efforts and costs must be shared by developing a common technology platform for 2D materials that can address several commercially attractive applications where graphene or another 2D material offers superior performance as well. We hope that the insights provided in this work can help to accelerate this process.Item Open Access Electronic and structural instabilities in the putative excitonic insulator Ta2NiSe5(2025) Zhang, Yuanshan; Takagi, Hidenori (Prof. Dr.)Item Open Access A reflection on ‘A hydrazone-based covalent organic framework for photocatalytic hydrogen production’ : teaching sponges new tricks(2026) Rodríguez-Camargo, Andrés; Lotsch, Bettina V.Covalent organic frameworks (COFs) are a unique class of porous materials built entirely from organic building blocks. As such, COFs unite the tunability of molecules with the robustness and optoelectronic functionality of extended solids-key requisites for (photo)catalysis. This LEGO®-like design of crystalline “molecular sponges” has captivated the imagination of chemists and inspired the first COF photocatalyst: a hydrazone-linked COF capable of harnessing visible light to drive the evolution of hydrogen from water. This commentary revisits that seminal contribution, published 11 years ago in Chemical Science (L. Stegbauer, K. Schwinghammer, B. V. Lotsch, Chem. Sci. , 2014, 5 , 2789-2793, https://doi.org/10.1039/C4SC00016A ), and reflects on its lasting impact. We survey the major advances that have shaped COF photocatalysis over the past decade and outline emerging opportunities and challenges, offering a forward-looking perspective on the role of COFs in solar energy conversion.Item Open Access Polarized neutron reflectometry study of complex magnetism and hydrogen incorporation in thin-film structures(2022) Guasco, Laura; Keimer, Bernhard (Prof. Dr.)In this thesis, we present the study of the structural and magnetic properties of simple metals and complex oxide thin films by means of polarized neutron reflectometry. The nuclear and electronic properties of thin films were modified via two routes, namely via hydrogen incorporation, in the case of niobium systems and complex oxide layers, and via depth modulated hole doping, in the case of manganite heterostructures.Item Open Access Confirmation of siderazot, Fe3N1.33, the only terrestrial nitride mineral(2021) Bette, Sebastian; Theye, Thomas; Bernhardt, Heinz-Jürgen; Clark, William P.; Niewa, RainerSiderazot, the only terrestrial nitride mineral, was reported only once in 1876 to occur as coating on volcanic rocks in a fumarolic environment from Mt. Etna and, to date, has been neither confirmed nor structurally characterized. We have studied the holotype sample from the Natural History Museum, London, UK, originally collected by O. Silvestri in 1874, and present siderazot with epsilon-Fe3N-type crystal structure and composition of Fe3N1.33(7) according to crystal structure Rietveld refinements, in good agreement with electron microprobe analyses. Crystal structure data, chemical composition, and Raman and reflectance measurements are reported. Possible formation conditions are derived from composition and phase stability data according to synthetic samples.Item Open Access Interphases between alkali metals (Li, Na) and battery electrolytes : ion transport and growth behavior(2022) Lim, Kyungmi; Maier, Joachim (Prof. Dr.)Item Open Access Designing covalent organic framework‐based light‐driven microswimmers toward therapeutic applications(2023) Sridhar, Varun; Yildiz, Erdost; Rodríguez‐Camargo, Andrés; Lyu, Xianglong; Yao, Liang; Wrede, Paul; Aghakhani, Amirreza; Akolpoglu, Birgul M.; Podjaski, Filip; Lotsch, Bettina V.; Sitti, MetinWhile micromachines with tailored functionalities enable therapeutic applications in biological environments, their controlled motion and targeted drug delivery in biological media require sophisticated designs for practical applications. Covalent organic frameworks (COFs), a new generation of crystalline and nanoporous polymers, offer new perspectives for light‐driven microswimmers in heterogeneous biological environments including intraocular fluids, thus setting the stage for biomedical applications such as retinal drug delivery. Two different types of COFs, uniformly spherical TABP‐PDA‐COF sub‐micrometer particles and texturally nanoporous, micrometer‐sized TpAzo‐COF particles are described and compared as light‐driven microrobots. They can be used as highly efficient visible‐light‐driven drug carriers in aqueous ionic and cellular media. Their absorption ranging down to red light enables phototaxis even in deeper and viscous biological media, while the organic nature of COFs ensures their biocompatibility. Their inherently porous structures with ≈2.6 and ≈3.4 nm pores, and large surface areas allow for targeted and efficient drug loading even for insoluble drugs, which can be released on demand. Additionally, indocyanine green (ICG) dye loading in the pores enables photoacoustic imaging, optical coherence tomography, and hyperthermia in operando conditions. This real‐time visualization of the drug‐loaded COF microswimmers enables unique insights into the action of photoactive porous drug carriers for therapeutic applications.Item Open Access Exploring the growth of refractory metal and sapphire films by thermal laser epitaxy(2024) Majer, Lena N.; Mannhart, Jochen (Prof. Dr.)Item Open Access Novel theoretical methods for transition metal chemistry(2025) Safari, Arta A.; Alavi, Ali (Prof. Dr.)