Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
6 results
Search Results
Item Open Access Computer simulation of anchoring technique in reinforced concrete beams(1990) Cervenka, Vladimir; Pukl, Radomir; Eligehausen, RolfThe load transfer in reinforced concrete structures by means of anchoring elements is very common in modern concrete technology. Anchoring elements are often inserted in the bottom surface of a structure and the load is transfered by tensile action of the concrete. In case of shear failure, the anchores are located in the most exposed tensile zone of beams. The shear failure can be thus influenced by anchoring elements. This effect was analysed by means of the finite element program SBETA, which is based on the nonlinear-elastic constitutive model. The comparison with experiments for several loading configurations was made. In the second part a computer simulation of similar experiments was conducted.Item Open Access Computer simulation: splitting tests of concrete thick-walled rings(1992) Pukl, Radomir; Schlottke, Bernd; Ozbolt, Josko; Eligehausen, RolfTwo non-linear program systems are used for a computer simulation of splitting failure of thick-walled concrete rings under internal radial pressure. Results of the numerical analyses for plane stress models, axisymmetrical model and 3D model are compared with available experimental data and empirical formulas. It is shown, that the behavior observed in experiments can be simulated, using advanced material models, namely the non local microplane model and SBETA material model based on the crack hand theory. With increasing outer radius of the ring, a size effect can be observed.Item Open Access Size effect of the concrete cone failure load of anchor bolts(1992) Eligehausen, Rolf; Bouska, Petr; Cervenka, Vladimir; Pukl, RadomirThe concrete cone capacity of headed anchor bolts subjected to axial tension load was experimentally investigated using 35 concrete specimens of three different sizes. The dimensions of the test specimens were varied in proportion to the embedment depth h (h = 50, 150 and 450 mm). Material properties were measured on accompanying specimens. The measured failure loads are compared with other experimental and numerical investigations. According to the present results the failure loads increase in proportion to h 16, that means close to the prediction by linear fracture mechanics.Item Open Access Post-processing tools for nonlinear fe analysis of concrete structures(1990) Cervenka, Vladimir; Pukl, Radomir; Eligehausen, RolfFinite clement analysis of the cracking process in concrete structures brings new requirements for the post-processing environment. Crack direction and location are important for identification of the failure mode. The problem have been solved in the finite element program SBETA which was developed by the authors for simulation of the failure processes in reinforced concrete structures. The post-processing system creates the graphical images of crack patterns. Graphical sequences for simulation can be generated.Item Open Access Computer models of concrete structures(1991) Cervenka, Vladimir; Eligehausen, Rolf; Pukl, RadomirThe application of the nonlinear finite element analysis of concrete structures as a design tool is discussed. A computer program for structures in plane stress state is described and examples of its application in the research of fastening technique and in engineering practice are shown.Item Open Access Fracture analysis of concrete plane-stress pull-out tests(1991) Cervenka, Vladimir; Pukl, Radomir; Eligehausen, RolfThis paper reports on a parameter study which was performed for the Round Robin Analysis Of Anchor Bolts organized by RILEM Committee TC-90 FMA (Fracture Mechanics Applications). 18 plane-stress pull-out specimens were analyzed by the computer program SBETA which is based on the finite element method and takes into account nonlinear fracture mechanics. A simplified formula for the design of such anchors is derived.