Universität Stuttgart

Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1

Browse

Search Results

Now showing 1 - 10 of 256
  • Thumbnail Image
    ItemOpen Access
    Verantwortung für die Technik - ein Institutionenproblem
    (1991) Hubig, Christoph
    Die Übernahme einer Verantwortung für die Technik erscheint daher nach wie vor als zwar schwieriges, aber sukzessiv lösbares Institutionenproblem, das nicht auf Individualethik reduzierbar ist, das aber auch nicht an Institutionen und Bürokratien delegierbar ist. Es bedarf vielmehr eines neuen Typus von Institutionen im Umgang mit der Technik. Diese Institutionen sind charakterisiert durch ihre Transparenz und Offenheit hinsichtlich der Einwirkungsmöglichkeiten von Individuen auf sie selbst.
  • Thumbnail Image
    ItemOpen Access
    Introduction to air-water flows
    (1991) Kobus, Helmut
    For many hydraulic structures, safe operation can only be achieved if not only the characteristics of the water flow are considered, but due attention is also given to the simultaneous movement of air in the system. Although the difference in specific weight of air and water is so large that they are usually well separated by a sharp interface, a number of flow configurations lead to an intensive mixing across this surface. This process is called air entrainment. Consideration of the effects of entrained air upon water flow may be essential to provide for the safe operation of a hydraulic structure.
  • Thumbnail Image
    ItemOpen Access
    Darstellung von Didehydropyridinen aus (Trimethylsilyl)pyridinen
    (1991) Effenberger, Franz; Daub, Wolfgang
    Halogen-substituted (trimethylsilyl)pyridines 2, 3, 5 - 7 and trifluoromethylsulfonyloxy-substituted (trimethylsilyl)pyridines 9b, 11b are obtained from 2- and 3-halopyridines 1, 4 or hydroxypyridines 8, 10, and 12. Reactions of the 3- and 2-(trimethylsilyl)pyridines 2,9b and 11b with bases in the presence of furans 15 give only protodesilylation or hydrolysis products but no indication is found for the formation of a 2,3-didehydropyridine. 3-Bromo-4-(trimethylsilyl)pyridine (5a) reacts with KOCMe3 in the presence of furan (15a) to give a mixture of products from which the isoquinoline derivative 20 and the tert-butoxypyridines 23, 24 are formed by addition to 3,4-didehydropyridine. Under comparable conditions far higher yields of 3,4-didehydropyridines are obtained by treatment of the 3-halo-2,4-bis(trimethylsilyl)pyridines 7 with strong bases.
  • Thumbnail Image
    ItemOpen Access
    Energie und Klima: ist eine klimaverträgliche Energieversorgung erreichbar?
    (1991) Voß, Alfred
    Unter den Wissenschaftlern besteht weltweit Übereinstimmung, daß durch menschliche Tätigkeit freigesetzte Spurengase das Klima verändern. Unter diesen Spurengasen nimmt CO2 eine herausragende Rolle ein. Es gilt also, den CO2-Ausstoß zu verringern. Der Autor stellt die durch Energieumwandlungen entstehenden CO2-Emissionen vor und beschreibt mehrere Möglichkeiten einer CO2-Minderung. Hierbei geht er insbesondere auf die CO2-Reduktionsstrategien ein, wie sie für die Bundesrepublik Deutschland im Rahmen der Enquete-Kommission "Vorsorge zum Schutz der Erdatmosphäre" erarbeitet wurden.
  • Thumbnail Image
    ItemOpen Access
    Dynamics of poling PVDF between 25°C and 120°C
    (1991) Eberle, Gernot; Eisenmenger, Wolfgang
    PVDF films with high β-content are poled in an electric field of 60 MV/m at temperatures between 25°C and 120°C. At 25°C the alignment of dipoles takes place in a central poling zone during several hours of poling. When the temperature is increased to 120°C the poling time necessary to align the dipoles in this narrow zone is reduced to several seconds. In addition, at temperatures higher than 90°C and increased poling times the central poling zone first increases but later decreases in its dielectric displacement. Simultaneously in a 10 μm regime adjoining the positive electrode a secondary displacement zone starts to grow. The strong reduction of this peak under short circuit conditions indicates hetero-charge accumulation in front of an anode.
  • Thumbnail Image
    ItemOpen Access
    Adhesion of vesicles and membranes
    (1991) Lipowsky, Reinhard; Seifert, Udo
    In the presence of an attractive surface, a vesicle can undergo shape transformations between two different free states, between a free and a bound state, and between two different bound states. Adhesion can also lead to topological changes such as vesicle rupture and vesicle fusion. The interaction between the vesicle membrane and the surface is renormalized by thermally excited shape fluctuations. This renormalization leads to unbinding phenomena both for fluid and for polymerized (or solid-like) membranes.
  • Thumbnail Image
    ItemOpen Access
    Microwave conductivity in polycrystalline (BEDT-TTF)2I3 material
    (1991) Müller, Gerhard; Helberg, Hans W.; Schweitzer, Dieter; Keller, Heimo J.
    Polycrystalline material of the α-phase of (BEDT-TTF)2I3 was compressed to small samples (4-mm x 1mm, thickness 0.3 mm typically) at a pressure of 10 kbar. Annealing at 70°C yields the superconducting αt-phase. Microwaves (10,2 GHz) enable the measurements of the conductivity for stepwise annealing after every annealing step in always the same sample. For annealing times 10 min all conductivity versus temperature curves are intersecting in an isosbestlc point at 190 K. This behaviour can be described by a conductivity relation for a two component system, from which was determined the volume fraction of the new grown αt-phase in dependence of the annealing time. Starting annealing (annealing times < 10 min) shows another unexpected phase transformation. After 2 min annealing the conductivity at 200 K increases by more than one order of magnitude, but then decreases of further annealing (5-10 min) down to the value for the unannealed sample.
  • Thumbnail Image
    ItemOpen Access
    Software Engineering und CASE - Begriffserklärung und Standortbestimmung
    (1991) Ludewig, Jochen
    CASE-Tools werden heute als wichtige Mittel der Leistungs- und Qualitätssteigerung im Software Engineering betrachtet. Diese Einschätzung ist richtig, wenn sie mittel- und langfristig verstanden wird; sie ist falsch, wenn man erwartet, rasche Hilfe zu bekommen, die Versäumnisse in der Methodik und Schulung ausgleicht. Die heute angebotenen Werkzeuge weisen charakteristische Mängel auf, die - entgegen den Ankündigungen - ihren durchgehenden Einsatz sehr schwer machen. Trotzdem kann unter bestimmten Voraussetzungen, auch organisatorischen, die Qualität des Entwicklungsprozesses tatsächlich erhöht werden. Diese Verbesserung wirkt sich auch auf die Produktivität aus.
  • Thumbnail Image
    ItemOpen Access
    Föderalismus und ParteiendemokratIe in der Bundesrepublik Deutschland
    (1991) Gabriel, Oscar W.
    Es ist kaum möglich, die Bedeutung einer föderativen Staatsorganisation für die Erfüllung von Parteifunktionen in einer Demokratie generell zu beschreiben. Die These, Parteienwettbewerb und Föderalismus stünden zueinander in einer durch inkompatible Formen der Konfliktregulierung bedingten Konkurrenzbeziehung, ist zu undifferenziert. Eine Prüfung der Auswirkungen föderativer Strukturen auf die Leistungen der Parteien führt in den einzelnen Funktionsbereichen zu unterschiedlichen Ergebnissen. Föderative Strukturen helfen den Parteien dabei, die Aufgaben der Personalrekrutierung und der Integration der Bevölkerung in die politische Gemeinschaft zu erfüllen. Eine Erschwerung der Zielbildungsfunktion durch die für den Föderalismus typischen Konsenszwänge ist nicht auszuschließen. Allerdings lassen sich beim gegenwärtigen Forschungsstand kaum verläßliche Aussagen darüber machen, ob nicht andere, auch in zentralistischen Systemen auftretende Faktoren eher der Durchsetzung konsistenter politischer Programme im Wege stehen.
  • Thumbnail Image
    ItemOpen Access
    Dynamic modelling of multitubular catalytic reactors
    (1991) Stankiewicz, Andrzej; Eigenberger, Gerhart
    This paper presents a study on modelling and simulation of transient operational characteristics in multitubular fixed-bed reactors. The dynamic model of the reactor is based on a porous body approach which regards the intertubular space as a pseudo-homogeneous environment. Such an approach permits to take into account most factors in the geometrical design of the unit and thus to study the influence of various shell-side geometrical and operational parameters on the reactor behaviour. Based on the model, the dynamic responses of the two most common industrial reactor designs, i.e. the parallel flow unit with distributing plates and the crossflow reactor with disk-and-doughnut baffles have been investigated and compared. In addition, some problems of correct space discretization and use of time-dependent regridding procedures, are discussed.