Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
Search Results
Item Open Access Mechanistic insights into the allosteric regulation of the Clr4 protein lysine methyltransferase by autoinhibition and automethylation(2020) Khella, Mina S.; Bröhm, Alexander; Weirich, Sara; Jeltsch, AlbertClr4 is a histone H3 lysine 9 methyltransferase in Schizosaccharomyces pombe that is essential for heterochromatin formation. Previous biochemical and structural studies have shown that Clr4 is in an autoinhibited state in which an autoregulatory loop (ARL) blocks the active site. Automethylation of lysine residues in the ARL relieves autoinhibition. To investigate the mechanism of Clr4 regulation by autoinhibition and automethylation, we exchanged residues in the ARL by site-directed mutagenesis leading to stimulation or inhibition of automethylation and corresponding changes in Clr4 catalytic activity. Furthermore, we demonstrate that Clr4 prefers monomethylated (H3K9me1) over unmodified (H3K9me0) histone peptide substrates, similar to related human enzymes and, accordingly, H3K9me1 is more efficient in overcoming autoinhibition. Due to enzyme activation by automethylation, we observed a sigmoidal dependence of Clr4 activity on the AdoMet concentration, with stimulation at high AdoMet levels. In contrast, an automethylation-deficient mutant showed a hyperbolic Michaelis–Menten type relationship. These data suggest that automethylation of the ARL could act as a sensor for AdoMet levels in cells and regulate the generation and maintenance of heterochromatin accordingly. This process could connect epigenome modifications with the metabolic state of cells. As other human protein lysine methyltransferases (for example, PRC2) also use automethylation/autoinhibition mechanisms, our results may provide a model to describe their regulation as well.Item Open Access Beneficial properties of green tea catechins(2020) Musial, Claudia; Kuban-Jankowska, Alicja; Gorska-Ponikowska, MagdalenaGreen tea (Camellia sinesis) is widely known for its anticancer and anti-inflammatory properties. Among the biologically active compounds contained in Camellia sinesis, the main antioxidant agents are catechins. Recent scientific research indicates that the number of hydroxyl groups and the presence of characteristic structural groups have a major impact on the antioxidant activity of catechins. The best source of these compounds is unfermented green tea. Depending on the type and origin of green tea leaves, their antioxidant properties may be uneven. Catechins exhibit the strong property of neutralizing reactive oxygen and nitrogen species. The group of green tea catechin derivatives includes: epicatechin, epigallocatechin, epicatechin gallate and epigallocatechin gallate. The last of these presents the most potent anti-inflammatory and anticancer potential. Notably, green tea catechins are widely described to be efficient in the prevention of lung cancer, breast cancer, esophageal cancer, stomach cancer, liver cancer and prostate cancer. The current review aims to summarize the potential anticancer effects and molecular signaling pathways of major green tea catechins. It needs to be clearly emphasized that green tea as well as green tea catechols cannot replace the standard chemotherapy. Nonetheless, their beneficial effects may support the standard anticancer approach.Item Open Access Electron availability in CO2, CO and H2 mixtures constrains flux distribution, energy management and product formation in Clostridium ljungdahlii(2020) Hermann, Maria; Teleki, Attila; Weitz, Sandra; Niess, Alexander; Freund, Andreas; Bengelsdorf, Frank R.; Takors, RalfAcetogens such as Clostridium ljungdahlii can play a crucial role reducing the human CO2 footprint by converting industrial emissions containing CO2, CO and H2 into valuable products such as organic acids or alcohols. The quantitative understanding of cellular metabolism is a prerequisite to exploit the bacterial endowments and to fine-tune the cells by applying metabolic engineering tools. Studying the three gas mixtures CO2 + H2, CO and CO + CO2 + H2 (syngas) by continuously gassed batch cultivation experiments and applying flux balance analysis, we identified CO as the preferred carbon and electron source for growth and producing alcohols. However, the total yield of moles of carbon (mol-C) per electrons consumed was almost identical in all setups which underlines electron availability as the main factor influencing product formation. The Wood–Ljungdahl pathway (WLP) showed high flexibility by serving as the key NAD+ provider for CO2 + H2, whereas this function was strongly compensated by the transhydrogenase-like Nfn complex when CO was metabolized. Availability of reduced ferredoxin (Fdred) can be considered as a key determinant of metabolic control. Oxidation of CO via carbon monoxide dehydrogenase (CODH) is the main route of Fdred formation when CO is used as substrate, whereas Fdred is mainly regenerated via the methyl branch of WLP and the Nfn complex utilizing CO2 + H2. Consequently, doubled growth rates, highest ATP formation rates and highest amounts of reduced products (ethanol, 2,3-butanediol) were observed when CO was the sole carbon and electron source.Item Open Access Squalene-Hopene cyclase catalyzed isomerization of monoterpenes(2020) Diether, Svenja; Hauer, Bernhard (Prof. Dr.)Item Open Access Loops und Tunnel : unterschätzte Elemente in Enzymen(2020) Heinemann, Peter M.; Rapp, Lea R.; Hauer, BernhardIn enzymes, the active site is the location where substrates are chemically converted. If this site is deeply buried within the protein, substrates must pass not only through the body of the protein via a tunnel, but also flexible, site decorating loops to access the active site. These elements can act as filters that influence on both substrate specificity and activity. Identifying and understanding how they exert such control has been of growing interest over the past several years.Item Open Access Eclectic characterisation of chemically modified cell-derived matrices obtained by metabolic glycoengineering and re-assessment of commonly used methods(2020) Keller, Silke; Liedek, Anke; Shendi, Dalia; Bach, Monika; Tovar, Günter E. M.; Kluger, Petra J.; Southan, AlexanderAzide-bearing cell-derived extracellular matrices (“clickECMs”) have emerged as a highly exciting new class of biomaterials. They conserve substantial characteristics of the natural extracellular matrix (ECM) and offer simultaneously small abiotic functional groups that enable bioorthogonal bioconjugation reactions. Despite their attractiveness, investigation of their biomolecular composition is very challenging due to the insoluble and highly complex nature of cell-derived matrices (CDMs). Yet, thorough qualitative and quantitative analysis of the overall material composition, organisation, localisation, and distribution of typical ECM-specific biomolecules is essential for consistent advancement of CDMs and the understanding of the prospective functions of the developed biomaterial. In this study, we evaluated frequently used methods for the analysis of complex CDMs. Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and (immune)histochemical staining methods in combination with several microscopic techniques were found to be highly eligible. Commercially available colorimetric protein assays turned out to deliver inaccurate information on CDMs. In contrast, we determined the nitrogen content of CDMs by elementary analysis and converted it into total protein content using conversion factors which were calculated from matching amino acid compositions. The amount of insoluble collagens was assessed based on the hydroxyproline content. The Sircol™ assay was identified as a suitable method to quantify soluble collagens while the Blyscan™ assay was found to be well-suited for the quantification of sulphated glycosaminoglycans (sGAGs). Eventually, we propose a series of suitable methods to reliably characterise the biomolecular composition of fibroblast-derived clickECM.Item Open Access Identification and characterization of IgE‐reactive proteins and a new allergen (Cic a 1.01) from chickpea (Cicer arietinum)(2020) Wangorsch, Andrea; Kulkarni, Anuja; Jamin, Annette; Spiric, Jelena; Bräcker, Julia; Brockmeyer, Jens; Mahler, Vera; Blanca‐López, Natalia; Ferrer, Marta; Blanca, Miguel; Torres, Maria; Gomez, Paqui; Bartra, Joan; García‐Moral, Alba; Goikoetxea, María J.; Vieths, Stefan; Toda, Masako; Zoccatelli, Gianni; Scheurer, StephanChickpea (Cicer arietinum) allergy has frequently been reported particularly in Spain and India. Nevertheless, chickpea allergens are poorly characterized. The authors aim to identify and characterize potential allergens from chickpea. Candidate proteins are selected by an in silico approach or immunoglobuline E (IgE)-testing. Potential allergens are prepared as recombinant or natural proteins and characterized for structural integrity by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), circular dichroism (CD)-spectroscopy, and mass spectrometry (MS) analysis. IgE-sensitization pattern of Spanish chickpea allergic and German peanut and birch pollen sensitized patients are investigated using chickpea extracts and purified proteins. Chickpea allergic patients show individual and heterogeneous IgE-sensitization profiles with extracts from raw and boiled chickpeas. Chickpea proteins pathogenesis related protein family 10 (PR-10), a late embryogenesis abundant protein (LEA/DC-8), and a vicilin-containing fraction, but not 2S albumin, shows IgE reactivity with sera from chickpea, birch pollen, and peanut sensitized patients. Remarkably, allergenic vicilin, DC-8, and PR-10 are detected in the extract of boiled chickpeas. Several IgE-reactive chickpea allergens are identified. For the first time a yet not classified DC-8 protein is characterized as minor allergen (Cic a 1). Finally, the data suggest a potential risk for peanut allergic patients by IgE cross-reactivity with homologous chickpea proteins.Item Open Access On the use of side‐chain NMR relaxation data to derive structural and dynamical information on proteins : a case study using hen lysozyme(2020) Smith, Lorna J.; Gunsteren, Wilfred F. van; Hansen, NielsValues of S2CH and S2NH order parameters derived from NMR relaxation measurements on proteins cannot be used straightforwardly to determine protein structure because they cannot be related to a single protein structure, but are defined in terms of an average over a conformational ensemble. Molecular dynamics simulation can generate a conformational ensemble and thus can be used to restrain S2CH and S2NH order parameters towards experimentally derived target values S2CH(exp) and S2NH(exp). Application of S2CH and S2NH order‐parameter restraining MD simulation to bond vectors in 63 side chains of the protein hen egg white lysozyme using 51 S2CH(exp) target values and 28 S2NH(exp) target values shows that a conformational ensemble compatible with the experimentally derived data can be obtained by using this technique. It is observed that S2CH order‐parameter restraining of C-H bonds in methyl groups is less reliable than S2NH order‐parameter restraining because of the possibly less valid assumptions and approximations used to derive experimental S2CH(exp) values from NMR relaxation measurements and the necessity to adopt the assumption of uniform rotational motion of methyl C-H bonds around their symmetry axis and of the independence of these motions from each other. The restrained simulations demonstrate that side chains on the protein surface are highly dynamic. Any hydrogen bonds they form and that appear in any of four different crystal structures, are fluctuating with short lifetimes in solution.Item Open Access Precision 3D‐printed cell scaffolds mimicking native tissue composition and mechanics(2020) Erben, Amelie; Hörning, Marcel; Hartmann, Bastian; Becke, Tanja; Eisler, Stephan A.; Southan, Alexander; Cranz, Séverine; Hayden, Oliver; Kneidinger, Nikolaus; Königshoff, Melanie; Lindner, Michael; Tovar, Günter E. M.; Burgstaller, Gerald; Clausen‐Schaumann, Hauke; Sudhop, Stefanie; Heymann, MichaelCellular dynamics are modeled by the 3D architecture and mechanics of the extracellular matrix (ECM) and vice versa. These bidirectional cell‐ECM interactions are the basis for all vital tissues, many of which have been investigated in 2D environments over the last decades. Experimental approaches to mimic in vivo cell niches in 3D with the highest biological conformity and resolution can enable new insights into these cell‐ECM interactions including proliferation, differentiation, migration, and invasion assays. Here, two‐photon stereolithography is adopted to print up to mm‐sized high‐precision 3D cell scaffolds at micrometer resolution with defined mechanical properties from protein‐based resins, such as bovine serum albumin or gelatin methacryloyl. By modifying the manufacturing process including two‐pass printing or post‐print crosslinking, high precision scaffolds with varying Young's moduli ranging from 7‐300 kPa are printed and quantified through atomic force microscopy. The impact of varying scaffold topographies on the dynamics of colonizing cells is observed using mouse myoblast cells and a 3D‐lung microtissue replica colonized with primary human lung fibroblast. This approach will allow for a systematic investigation of single‐cell and tissue dynamics in response to defined mechanical and bio‐molecular cues and is ultimately scalable to full organs.Item Open Access S‐adenosylmethionine and methylthioadenosine boost cellular productivities of antibody forming Chinese hamster ovary cells(2020) Verhagen, Natascha; Teleki, Attila; Heinrich, Christoph; Schilling, Martin; Unsöld, Andreas; Takors, RalfThe improvement of cell specific productivities for the formation of therapeutic proteins is an important step towards intensified production processes. Among others, the induction of the desired production phenotype via proper media additives is a feasible solution provided that said compounds adequately trigger metabolic and regulatory programs inside the cells. In this study, S‐(5′‐adenosyl)-l‐methionine (SAM) and 5′‐deoxy‐5′‐(methylthio)adenosine (MTA) were found to stimulate cell specific productivities up to approx. 50% while keeping viable cell densities transiently high and partially arresting the cell cycle in an anti‐IL‐8‐producing CHO‐DP12 cell line. Noteworthy, MTA turned out to be the chemical degradation product of the methyl group donor SAM and is consumed by the cells.
- «
- 1 (current)
- 2
- 3
- »