Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
37 results
Search Results
Item Open Access Finite-temperature interplay of structural stability, chemical complexity, and elastic properties of bcc multicomponent alloys from ab initio trained machine-learning potentials(2021) Gubaev, Konstantin; Ikeda, Yuji; Tasnádi, Ferenc; Neugebauer, Jörg; Shapeev, Alexander V.; Grabowski, Blazej; Körmann, FritzAn active learning approach to train machine-learning interatomic potentials (moment tensor potentials) for multicomponent alloys to ab initio data is presented. Employing this approach, the disordered body-centered cubic (bcc) TiZrHfTax system with varying Ta concentration is investigated via molecular dynamics simulations. Our results show a strong interplay between elastic properties and the structural ω phase stability, strongly affecting the mechanical properties. Based on these insights we systematically screen composition space for regimes where elastic constants show little or no temperature dependence (elinvar effect).Item Open Access Strong impact of spin fluctuations on the antiphase boundaries of weak itinerant ferromagnetic Ni3Al(2023) Xu, Xiang; Zhang, Xi; Ruban, Andrei; Schmauder, Siegfried; Grabowski, BlazejAntiphase boundaries (APBs) are crucial to understand the anomalous temperature dependence of the yield stress of Ni3Al. However, the required, accurate prediction of temperature-dependent APB energies has been missing. In particular, the impact of magnetism at elevated temperatures has been mostly neglected, based on the argument that Ni3Al is a weak ferromagnet. Here, we show that this is an inappropriate assumption and that - in addition to anharmonic and electronic excitations - thermally-induced magnetic spin fluctuations strongly affect the APB energies, especially for the (100)APB with an increase of nearly up to 40% over the nonmagnetic data. We utilize an ab initio framework that incorporates explicit lattice vibrations, electronic excitations, and the impact of magnetic excitations up to the melting temperature. Our results prompt to take full account of thermally-induced spin fluctuations even for weak itinerant ferromagnetic materials. Consequences for large-scale modeling in Ni-based superalloys, e.g., of dislocations or the elastic-plastic behavior, can be expected.Item Open Access High-accuracy thermodynamic properties to the melting point from ab initio calculations aided by machine-learning potentials(2023) Jung, Jong Hyun; Srinivasan, Prashanth; Forslund, Axel; Grabowski, BlazejAccurate prediction of thermodynamic properties requires an extremely accurate representation of the free-energy surface. Requirements are twofold - first, the inclusion of the relevant finite-temperature mechanisms, and second, a dense volume–temperature grid on which the calculations are performed. A systematic workflow for such calculations requires computational efficiency and reliability, and has not been available within an ab initio framework so far. Here, we elucidate such a framework involving direct upsampling, thermodynamic integration and machine-learning potentials, allowing us to incorporate, in particular, the full effect of anharmonic vibrations. The improved methodology has a five-times speed-up compared to state-of-the-art methods. We calculate equilibrium thermodynamic properties up to the melting point for bcc Nb, magnetic fcc Ni, fcc Al, and hcp Mg, and find remarkable agreement with experimental data. A strong impact of anharmonicity is observed specifically for Nb. The introduced procedure paves the way for the development of ab initio thermodynamic databases.Item Open Access Thermally-activated dislocation mobility in bcc metals : an accelerated molecular dynamics study(2021) Grabowski, Blazej; Zotov, NikolayPlastic deformation in metals is controlled by dislocation density and mobility. In bcc metals the mobility of screw dislocations, which takes place by temperature- and stress-driven nucleation of critical kink-pairs, is most essential for deformation. However, the critical resolved shear stresses at low temperatures, as determined from molecular dynamics (MD) simulations performed at constant strain rate, are typically 2–3 times larger than the yield stresses measured experimentally. Here, an accelerated MD procedure is developed and employed to investigate the onset of dislocation mobility in the prototypical system bcc Nb. The method combines constant strain and temperature MD with hyperdynamics, using a bond-boost potential. We demonstrate, with a careful statistical analysis, that the method enables nucleation of critical kink-pairs and the determination of the Gibbs energy of kink-pair formation from accelerated MD simulations at experimentally-measured shear stresses.Item Open Access Li5Sn, the most lithium-rich binary stannide : a combined experimental and computational study(2022) Stelzer, Robert U.; Ikeda, Yuji; Srinivasan, Prashanth; Lehmann, Tanja S.; Grabowski, Blazej; Niewa, RainerFrom reaction of excess lithium with tin, we isolate well-crystallized Li5Sn and solve the crystal structure from single-crystal X-ray diffraction data. The orthorhombic structure (space group Cmcm) features the same coordination polyhedra around tin and lithium as previously predicted by electronic structure calculations for this composition, however differently arranged. An extensive ab initio analysis, including thermodynamic integration using Langevin dynamics in combination with a machine-learning potential (moment tensor potential), is conducted to understand the thermodynamic stability of this Cmcm Li5Sn structure observed in our experiments. Among the 108 Li5Sn structures systematically derived using the structure enumeration algorithm, including the experimental Cmcm structure and those obtained in previous ab initio studies, another new structure with the space group Immm is found to be energetically most stable at 0 K. This computationally discovered Immm structure is also found to be thermodynamically more stable than the Cmcm structure at finite temperatures, indicating that the Cmcm Li5Sn structure observed in our experiments is favored likely due to kinetic reasons rather than thermodynamics.Item Open Access Structural and magnetic properties of newly found BaFeO2.667 synthesized by oxidizing BaFeO2.5 obtained via nebulized spray pyrolysis(2021) Wollstadt, Stephan; Ikeda, Yuji; Sarkar, Abhishek; Vasala, Sami; Fasel, Claudia; Alff, Lambert; Kruk, Robert; Grabowski, Blazej; Clemens, OliverA new vacancy-ordered perovskite-type compound Ba3Fe3O8 (BaFeO2.667) was prepared by oxidizing BaFeO2.5 (P21/c) with the latter compound obtained by a spray-pyrolysis technique. The structure of Ba3Fe3O8 was found to be isotypic to Ba3Fe3O7F (P21/m) and can be written as Ba3Fe3+2Fe4+1O8. Mössbauer spectroscopy and ab initio calculations were used to confirm mixed iron oxidation states, showing allocation of the tetravalent iron species on the tetrahedral site and octahedral as well as square pyramidal coordination for the trivalent species within a G-type antiferromagnetic ordering. The uptake and release of oxygen was investigated over a broad temperature range from RT to 1100 °C under pure oxygen and ambient atmosphere via a combination of DTA/TG and variable temperature diffraction measurements. The compound exhibits a strong lattice enthalpy driven reduction to monoclinic and cubic BaFeO2.5 at elevated temperatures.Item Open Access Ab initio surface free energies of tungsten with full account of thermal excitations(2022) Forslund, Axel; Ruban, AndreiThe surface free energies of seven different facets of tungsten (W) are obtained up to the melting point with full account of all the relevant thermal excitations; in particular, thermal atomic vibrations, electronic excitations, and their mutual coupling. The latter is done using ab initio molecular dynamics simulations coupled with the thermodynamic integration technique. In this way, the calculations contain almost no error but the one related to the used exchange-correlation functional, which makes the results truly first principles. The obtained results are compared with previous quasiharmonic calculations for the surface free energies of W and experimental data. The anharmonic contribution is, as expected, important for open surfaces at high temperatures, which leads to a temperature dependence of the surface energy anisotropy. The calculated Wulff shapes and surface energies are in excellent agreement with experimental data close to the melting point, where the crystalline structure of the surface layers is destroyed by a dramatic mobility of the atoms there.Item Open Access Crystal structure and phase stability of Co2N: a combined first-principles and experimental study(2021) Ikeda, Yuji; Lehmann, Tanja S.; Widenmeyer, Marc; Coduri, Mauro; Grabowski, Blazej; Niewa, RainerThe crystal structure and phase stability of Co2N are revisited based on experiments and first-principles calculations. Powder X-ray diffraction (PXRD) measurements and Rietveld refinements clearly confirm that the stable crystal structure of Co2N is an isotype of η-Fe2C and Co2C with the space group Pnnm rather than the closely related ζ-Fe2N with the space group Pbcn. The refined lattice parameters of Co2N in the Pnnm structure are a = 4.6108(1) Å, b = 4.3498(1) Å, c = 2.85592(7) Å, obtained from X-ray diffraction using synchrotron radiation. Furthermore, differential scanning calorimetry (DSC) with subsequent diffraction experiments reveal an endothermal transition to an ε-type order at 398 °C followed by an exothermal decomposition at 446 °C. First-principles density-functional-theory (DFT) calculations including the Hubbard U correction (DFT+U) demonstrate that it is essential for transition metal nitrides to consider strong electron correlation to predict the correct experimental structure and magnetic state. In particular, an effective value of Ueff = 2.75 eV can be utilized to obtain an antiferromagnetic Pnnm phase of Co2N in agreement with experiments.Item Open Access Interstitials in compositionally complex alloys(2023) Baker, Ian; Grabowski, Blazej; Divinski, Sergiy V.; Zhang, Xi; Ikeda, YujiThe effects of interstitial alloying on the mechanical and diffusive properties of compositionally complex alloys (CCAs), including high-entropy alloys (HEAs), are reviewed. The solubility of interstitial elements in CCAs can be extraordinarily high, a feature corroborated by ab initio density functional theory simulations. The yield stresses, work-hardening rates, and Hall-Petch slopes of CCAs are normally reported to increase due to interstitial alloying. In some CCAs, interstitial alloying has been found to enhance both strength and ductility, thus circumventing the traditional tradeoff between these properties. Self-diffusivities of the HEA CoCrFeMnNi are found to show complex dependences on interstitial C concentration as well as on temperature. Some CCAs with Laves phase or body-centered cubic crystal structures show potential as hydrogen-storage materials, with both experimental and computational research in this area steadily increasing. Based on the insights obtained, possible directions for further studies on the impacts of interstitial alloying in CCAs are suggested.Item Open Access Atom probe study on CuNi thin films : miscibility gap and grain boundary segregation(2023) Duran, Rüya; Schmitz, Guido (Prof. Dr. Dr. h. c.)In dieser Arbeit wurde die Lage der Mischungslücke, und die Korngrenzsegregation im Legierungssystem, Kupfer-Nickel, per Atomsondentomographie (APT) analysiert. Zur Untersuchung der Mischungslücke eines binären Systems mit langsamer Diffusion wurde ein neues Verfahren verwendet. Multilagen aus Cu- und Ni- Dünnschichten wurden mittels Ionenstrahlbeschichtung (IBS) auf Wolframpfosten beschichtet und durch fokussierte Ionenstrahlung (FIB) geformt. Bei drei unterschiedlichen Temperaturen, zwischen 573 und 673 K, wurden isotherme Auslagerungssequenzen an einem Ultrahochvakuumofen (UHV) durchgeführt und der Mischungsprozess analysiert. Ein Modell des Diffusionsprozesses wurde mittels mathematischer Überlegungen erstellt. Durch das Fitten der experimentellen Kompositionsprofile mittels dieses Modells konnten die Gleichgewichtskonzentrationen der Schichten auch mit relativ kurzen Auslagerungszeiten ermittelt werden. Darüber hinaus konnten aus den diffusionskontrollierten Zeit- und Temperaturdaten physikalische Eigenschaften wie der effektive Diffusionskoeffizient (Gitterdiffusion einschließlich Defektdiffusion) bestimmt werden. Dieser betrug Deff = 1.86 ∙ 10-10 m2/s ∙ exp(-164 kJ mol-1/RT). Während dem Vermischen wurde die Änderung der multilagigen Mikrostruktur bis zur vollständigen Mischung bei 623 und 673 K beobachtet, wobei Korngrenzen als schneller Diffusionsweg eine wichtige Rolle spielen. Bei 573 K wurde Nichtmischbarkeit experimentell deutlich nachgewiesen, wobei die Phasengrenzen bei cNi=26 at.% und cNi=66 at.% liegen. Mit diesen Phasengrenzen wurde die Mischungslücke über eine Redlich-Kister-Parametrisierung der Gibbs‘schen freien Energie über den gesamten Konzentrationsbereich rekonstruiert. Hierin wurde für die kritische Temperatur, TC, 608 K bei einer Konzentration von 45 at% Ni gefunden. Im zweiten Teil wurde die Korngrenzsegregation durch die FIB/tEBSD- (Transmissions-Elektronen-Rückstreubeugung) Technik, in Korrelation zu APT-Messung charakterisiert. Vier Legierungen mit einem Ni-Anteil zwischen 25 und 85 at.% wurden auf Wolframpfosten per IBS beschichtet, und bei 700 K für 24 h wärmebehandelt. Die Segregation von Cu in die Korngrenzen wurde beobachtet. Durch die Verwendung eines theoretischen Models wurde die Exzess-Kurve über den gesamten Konzentrationsbereich, und die Korngrenz-Formationsenergie auf Basis der experimentellen Daten berechnet. Die tEBSD-Analyse während der FIB-Präparation erlaubt die Identifikation der Körner und deren Orientierung. Ein neues Verfahren wurde entwickelt, um mithilfe der Orientierung benachbarter Körner, Berechnungen zur Ermittlung der Korngrenzorientierung durchzuführen und somit die Orientierung natürlicher Korngrenzen zu bestimmen. Mit diesem Verfahren konnte der zeitliche Aufwand dieser anspruchsvollen Auswertung (verglichen zur herkömmlichen Methode mittels TEM-Untersuchung) stark reduziert werden, so dass eine quantitative Analyse vieler Korngrenzen möglich wurde. Aus den einzelnen Korngrenzorientierungen wurde die Korngrenzrotation, und die jeweiligen Anteile an Kippung und Drehung berechnet. Eine Abhängigkeit der Feststoffsegregation vom Kipp- und Drehanteil der Korngrenze wurde beobachtet, die am kleinsten für die reine Kipp- und Drehrotation war. Die ermittelten Segregationsweiten sind signifikant größer als die strukturellen Korngrenzweiten und bewegen sich zwischen 12 und 85 Å. Dieses Verhalten wurde durch eine künstliche Verbreiterung der Korngrenze erklärt, die durch eine Flugbahnabweichung der Korngrenzatome während der Verdampfung verursacht wurde. Eine Korngrenzweite von w0 = (10.1 ± 1.5) Å wurde für eine unverfälschte Korngrenze gefunden.