Universität Stuttgart

Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1

Browse

Filters

2015 - 201932020 - 202419

Settings

Subject: search.filters.subject.530Institute: search.filters.UBSInstitut.Stuttgart Research Centre of Photonic Engineering (SCoPE)Institute: search.filters.UBSInstitut.4. Physikalisches InstitutInstitute: search.filters.UBSInstitut.Fakultätsübergreifend / Sonstige Einrichtung

Search Results

Now showing 1 - 10 of 22
  • Thumbnail Image
    ItemOpen Access
    Tailored nanocomposites for 3D printed micro-optics
    (2020) Weber, Ksenia; Werdehausen, Daniel; König, Peter; Thiele, Simon; Schmid, Michael; Decker, Manuel; Oliveira, Peter William de; Herkommer, Alois; Giessen, Harald
  • Thumbnail Image
    ItemOpen Access
    Generation of terahertz radiation via the transverse thermoelectric effect
    (2023) Yordanov, Petar; Priessnitz, Tim; Kim, Min‐Jae; Cristiani, Georg; Logvenov, Gennady; Keimer, Bernhard; Kaiser, Stefan
    Terahertz (THz) radiation is a powerful tool with widespread applications ranging from imaging, sensing, and broadband communications to spectroscopy and nonlinear control of materials. Future progress in THz technology depends on the development of efficient, structurally simple THz emitters that can be implemented in advanced miniaturized devices. Here, it is shown how the natural electronic anisotropy of layered conducting transition metal oxides enables the generation of intense terahertz radiation via the transverse thermoelectric effect. In thin films grown on off‐cut substrates, femtosecond laser pulses generate ultrafast out‐of‐plane temperature gradients, which in turn launch in‐plane thermoelectric currents, thus allowing efficient emission of the resulting THz field out of the film structure. This scheme is demonstrated in experiments on thin films of the layered metals PdCoO2 and La1.84Sr0.16CuO4, and model calculations that elucidate the influence of the material parameters on the intensity and spectral characteristics of the emitted THz field are presented. Due to its simplicity, the method opens up a promising avenue for the development of highly versatile THz sources and integrable emitter elements.
  • Thumbnail Image
    ItemOpen Access
    Surface- and tip-enhanced resonant Raman scattering from CdSe nanocrystals
    (2015) Sheremet, Evgeniya; Milekhin, Alexander G.; Rodriguez, Raul D.; Weiss, Thomas; Nesterov, Maxim; Rodyakina, Ekaterina E.; Gordan, Ovidiu D.; Sveshnikova, Larisa L.; Duda, Tatyana A.; Gridchin, Victor A.; Dzhagan, Volodymyr M.; Hietschold, Michael; Zahn, Dietrich R. T.
    Surface- and tip-enhanced resonant Raman scattering (resonant SERS and TERS) by optical phonons in a monolayer of CdSe quantum dots (QDs) is demonstrated. The SERS enhancement was achieved by employing plasmonically active substrates consisting of gold arrays with varying nanocluster diameters prepared by electron-beam lithography. The magnitude of the SERS enhancement depends on the localized surface plasmon resonance (LSPR) energy, which is determined by the structural parameters. The LSPR positions as a function of nanocluster diameter were experimentally determined from spectroscopic micro-ellipsometry, and compared to numerical simulations showing good qualitative agreement. The monolayer of CdSe QDs was deposited by the Langmuir–Blodgett-based technique on the SERS substrates. By tuning the excitation energy close to the band gap of the CdSe QDs and to the LSPR energy, resonant SERS by longitudinal optical (LO) phonons of CdSe QDs was realized. A SERS enhancement factor of 2 × 10 3 was achieved. This allowed the detection of higher order LO modes of CdSe QDs, evidencing the high crystalline quality of QDs. The dependence of LO phonon mode intensity on the size of Au nanoclusters reveals a resonant character, suggesting that the electromagnetic mechanism of the SERS enhancement is dominant. Finally, the resonant TERS spectrum from CdSe QDs was obtained using electrochemically etched gold tips providing an enhancement on the order of 10 4 . This is an important step towards the detection of the phonon spectrum from a single QD.
  • Thumbnail Image
    ItemOpen Access
    Nearly diffraction limited FTIR mapping using an ultrastable broadband femtosecond laser tunable from 1.33 to 8 µm
    (2017) Mörz, Florian; Semenyshyn, Rostyslav; Steinle, Tobias; Neubrech, Frank; Zschieschang, Ute; Klauk, Hagen; Steinmann, Andy; Giessen, Harald
    Micro-Fourier-transform infrared (FTIR) spectroscopy is a widespread technique that enables broadband measurements of infrared active molecular vibrations at high sensitivity. SiC globars are often applied as light sources in tabletop systems, typically covering a spectral range from about 1 to 20 µm (10 000 - 500 cm−1) in FTIR spectrometers. However, measuring sample areas below 40x40 µm2 requires very long integration times due to their inherently low brilliance. This hampers the detection of ultrasmall samples, such as minute amounts of molecules or single nanoparticles. In this publication we extend the current limits of FTIR spectroscopy in terms of measurable sample areas, detection limit and speed by utilizing a broadband, tabletop laser system with MHz repetition rate and femtosecond pulse duration that covers the spectral region between 1250 - 7520 cm−1 (1.33 - 8 µm). We demonstrate mapping of a 150x150 µm2 sample of 100 nm thick molecule layers at 1430 cm−1 (7 µm) with 10x10 µm2 spatial resolution and a scan speed of 3.5 µm/sec. Compared to a similar globar measurement an order of magnitude lower noise is achieved, due to an excellent long-term wavelength and power stability, as well as an orders of magnitude higher brilliance.
  • Thumbnail Image
    ItemOpen Access
    3D direct laser writing of highly absorptive photoresist for miniature optical apertures
    (2022) Schmid, Michael D.; Toulouse, Andrea; Thiele, Simon; Mangold, Simon; Herkommer, Alois; Giessen, Harald
    The importance of 3D direct laser writing as an enabling technology increased rapidly in recent years. Complex micro-optics and optical devices with various functionalities are now feasible. Different possibilities to increase the optical performance are demonstrated, for example, multi-lens objectives, a combination of different photoresists, or diffractive optical elements. It is still challenging to create fitting apertures for these micro optics. In this work, a novel and simple way to create 3D-printed opaque structures with a highly absorptive photoresist is introduced, which can be used to fabricate microscopic apertures increasing the contrast of 3D-printed micro optics and enabling new optical designs. Both hybrid printing by combining clear and opaque resists, as well as printing transparent optical elements and their surrounding opaque apertures solely from a single black resist by using different printing thicknesses are demonstrated.
  • Thumbnail Image
    ItemOpen Access
    Ultrathin monolithic 3D printed optical coherence tomography endoscopy for preclinical and clinical use
    (2020) Li, Jiawen; Thiele, Simon; Quirk, Bryden C.; Kirk, Rodney W.; Verjans, Johan W.; Akers, Emma; Bursill, Christina A.; Nicholls, Stephen J.; Herkommer, Alois; Giessen, Harald; McLaughlin, Robert A.
  • Thumbnail Image
    ItemOpen Access
    3D printed micro-optics for quantum technology: Optimised coupling of single quantum dot emission into a single-mode fibre
    (2021) Sartison, Marc; Weber, Ksenia; Thiele, Simon; Bremer, Lucas; Fischbach, Sarah; Herzog, Thomas; Kolatschek, Sascha; Jetter, Michael; Reitzenstein, Stephan; Herkommer, Alois; Michler, Peter; Portalupi, Simone Luca; Giessen, Harald
  • Thumbnail Image
    ItemOpen Access
    Micro- and nanofabrication of dynamic hydrogels with multichannel information
    (2023) Zhang, Mingchao; Lee, Yohan; Zheng, Zhiqiang; Khan, Muhammad Turab Ali; Lyu, Xianglong; Byun, Junghwan; Giessen, Harald; Sitti, Metin
    Creating micro/nanostructures containing multi-channel information within responsive hydrogels presents exciting opportunities for dynamically changing functionalities. However, fabricating these structures is immensely challenging due to the soft and dynamic nature of hydrogels, often resulting in unintended structural deformations or destruction. Here, we demonstrate that dehydrated hydrogels, treated by a programmable femtosecond laser, can allow for a robust fabrication of micro/nanostructures. The dehydration enhances the rigidity of the hydrogels and temporarily locks the dynamic behaviours, significantly promoting their structural integrity during the fabrication process. By utilizing versatile dosage domains of the femtosecond laser, we create micro-grooves on the hydrogel surface through the use of a high-dosage mode, while also altering the fluorescent intensity within the rest of the non-ablated areas via a low-dosage laser. In this way, we rationally design a pixel unit containing three-channel information: structural color, polarization state, and fluorescent intensity, and encode three complex image information sets into these channels. Distinct images at the same location were simultaneously printed onto the hydrogel, which can be observed individually under different imaging modes without cross-talk. Notably, the recovered dynamic responsiveness of the hydrogel enables a multi-information-encoded surface that can sequentially display different information as the temperature changes.
  • Thumbnail Image
    ItemOpen Access
    Interaction of edge exciton polaritons with engineered defects in the hyperbolic material Bi2Se3
    (2021) Lingstädt, Robin; Talebi, Nahid; Hentschel, Mario; Mashhadi, Soudabeh; Gompf, Bruno; Burghard, Marko; Giessen, Harald; Aken, Peter A. van
    Hyperbolic materials exhibit unique properties that enable intriguing applications in nanophotonics. The topological insulator Bi2Se3 represents a natural hyperbolic optical medium, both in the THz and visible range. Here, using cathodoluminescence spectroscopy and electron energy-loss spectroscopy, we demonstrate that Bi2Se3 supports room-temperature exciton polaritons and explore the behavior of hyperbolic edge exciton polaritons, which are hybrid modes resulting from the coupling of the polaritons bound to the upper and lower edges of Bi2Se3 nanoplatelets. We compare Fabry-Pérot-like resonances emerging in edge polariton propagation along pristine and artificially structured edges and experimentally demonstrate the possibility to steer edge polaritons by means of grooves and nanocavities. The observed scattering of edge polaritons by defect structures is found to be in good agreement with finite-difference time-domain simulations. Our findings reveal the extraordinary capability of hyperbolic polariton propagation to cope with the presence of defects, providing an excellent basis for applications such as nanooptical circuitry, nanoscale cloaking and nanoscopic quantum technology.
  • Thumbnail Image
    ItemOpen Access
    Positional accuracy of 3D printed quantum emitter fiber couplers
    (2024) Weber, Ksenia; Thiele, Simon; Hentschel, Mario; Herkommer, Alois; Giessen, Harald
    Precise positioning of optical elements plays a key role in the performance of optical systems. While additive manufacturing techniques such as 3D printing enable the creation of entire complex micro‐objectives in one step, thus rendering lens alignment unnecessary, certain applications require precise positional alignment of the printing process with respect to the substrate. For example, in order to efficiently couple quantum emitters to single‐mode fibers, which is a crucial step in the development of real world quantum networks, precise alignment between the emitter, the coupling optics, and the single‐mode fiber is of utmost importance. In this work, the positioning accuracy of a Photonics Professional GT (Nanoscribe GmbH) 3D printing machine is evaluated by using the integrated piezo stage to align to gold markers that is manufactured via e‐beam lithography. By running a statistical analysis of 38 printing cycles, a mean positional error of only 80 nm is determined. Additionally, an entire system is 3D printed that can couple quantum emitters to optical single‐mode fibers. Examining the focal spot of the 3D printed micro‐optics, a positional accuracy of ≈ 1 µm in all three dimensions is found, as well as excellent quality of the focal spot.