Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
45 results
Search Results
Item Open Access Quantum fluctuations in one-dimensional supersolids(2023) Bühler, Chris; Ilg, Tobias; Büchler, Hans PeterItem Open Access Bell-state measurement exceeding 50% success probability with linear optics(2023) Bayerbach, Matthias J.; D’Aurelio, Simone E.; Loock, Peter van; Barz, StefanieItem Open Access Cavity QED based on room temperature atoms interacting with a photonic crystal cavity : a feasibility study(2020) Alaeian, Hadiseh; Ritter, Ralf; Basic, Muamera; Löw, Robert; Pfau, TilmanThe paradigm of cavity QED is a two-level emitter interacting with a high-quality factor single-mode optical resonator. The hybridization of the emitter and photon wave functions mandates large vacuum Rabi frequencies and long coherence times; features that so far have been successfully realized with trapped cold atoms and ions, and localized solid-state quantum emitters such as superconducting circuits, quantum dots, and color centers Reiserer and Rempe (Rev Modern Phys 87:1379, 2015), Faraon et al. (Phys Rev 81:033838, 2010). Thermal atoms, on the other hand, provide us with a dense emitter ensemble and in comparison to the cold systems are more compatible with integration, hence enabling large-scale quantum systems. However, their thermal motion and large transit-time broadening is a major bottleneck that has to be circumvented. A promising remedy could benefit from the highly controllable and tunable electromagnetic fields of a nano-photonic cavity with strong local electric-field enhancements. Utilizing this feature, here we investigate the interaction between fast moving thermal atoms and a nano-beam photonic crystal cavity (PCC) with large quality factor and small mode volume. Through fully quantum mechanical calculations, including Casimir-Polder potential (i.e. the effect of the surface on radiation properties of an atom), we show, when designed properly, the achievable coupling between the flying atom and the cavity photon would be strong enough to lead to quantum interference effects in spite of short interaction times. In addition, the time-resolved detection of different trajectories can be used to identify single and multiple atom counts. This probabilistic approach will find applications in cavity QED studies in dense atomic media and paves the way towards realizing large-scale, room-temperature macroscopic quantum systems aimed at out of the lab quantum devices.Item Open Access Heterodyne sensing of microwaves with a quantum sensor(2021) Meinel, Jonas; Vorobyov, Vadim; Yavkin, Boris; Dasari, Durga; Sumiya, Hitoshi; Onoda, Shinobu; Isoya, Junichi; Wrachtrup, JörgDiamond quantum sensors are sensitive to weak microwave magnetic fields resonant to the spin transitions. However, the spectral resolution in such protocols is ultimately limited by the sensor lifetime. Here, we demonstrate a heterodyne detection method for microwaves (MW) leading to a lifetime independent spectral resolution in the GHz range. We reference the MW signal to a local oscillator by generating the initial superposition state from a coherent source. Experimentally, we achieve a spectral resolution below 1 Hz for a 4 GHz signal far below the sensor lifetime limit of kilohertz. Furthermore, we show control over the interaction of the MW-field with the two-level system by applying dressing fields, pulsed Mollow absorption and Floquet dynamics under strong longitudinal radio frequency drive. While pulsed Mollow absorption leads to improved sensitivity, the Floquet dynamics allow robust control, independent from the system’s resonance frequency. Our work is important for future studies in sensing weak microwave signals in a wide frequency range with high spectral resolution.Item Open Access Quantum Fourier transform for nanoscale quantum sensing(2021) Vorobyov, Vadim; Zaiser, Sebastian; Abt, Nikolas; Meinel, Jonas; Dasari, Durga; Neumann, Philipp; Wrachtrup, JörgThe quantum Fourier transformation (QFT) is a key building block for a whole wealth of quantum algorithms. Despite its proven efficiency, only a few proof-of-principle demonstrations have been reported. Here we utilize QFT to enhance the performance of a quantum sensor. We implement the QFT algorithm in a hybrid quantum register consisting of a nitrogen-vacancy (NV) center electron spin and three nuclear spins. The QFT runs on the nuclear spins and serves to process the sensor - i.e., the NV electron spin signal. Specifically, we show the application of QFT for correlation spectroscopy, where the long correlation time benefits the use of the QFT in gaining maximum precision and dynamic range at the same time. We further point out the ability for demultiplexing the nuclear magnetic resonance (NMR) signals using QFT and demonstrate precision scaling with the number of used qubits. Our results mark the application of a complex quantum algorithm in sensing which is of particular interest for high dynamic range quantum sensing and nanoscale NMR spectroscopy experiments.Item Open Access Character of doped holes in Nd1-xSrxNiO2(2021) Plienbumrung, Tharathep; Schmid, Michael Thobias; Daghofer, Maria; Oleś, Andrzej M.We investigate charge distribution in the recently discovered high-𝑇𝑐 superconductors, layered nickelates. With increasing value of charge-transfer energy, we observe the expected crossover from the cuprate to the local triplet regime upon hole doping. We find that the 𝑑-𝑝 Coulomb interaction 𝑈𝑑𝑝 makes Zhang-Rice singlets less favorable, while the amplitude of local triplets at Ni ions is enhanced. By investigating the effective two-band model with orbitals of 𝑥2-𝑦2 and s symmetries we show that antiferromagnetic interactions dominate for electron doping. The screened interactions for the s band suggest the importance of rare-earth atoms in superconducting nickelates.Item Open Access Single-band versus two-band description of magnetism in infinite-layer nickelates(2023) Plienbumrung, Tharathep; Daghofer, Maria; Morée, Jean-Baptiste; Oleś, Andrzej M.We present a weak-coupling analysis of magnetism in infinite-layer nickelates, where we compare a single-band description with a two-band model. Both models predict that (i) hybridization due to hopping is negligible, and (𝑖𝑖) the magnetic properties are characterized by very similar dynamic structure factors, 𝑆(𝑘⃗ ,𝜔), at the points (𝜋,𝜋,0) and (𝜋,𝜋,𝜋). This gives effectively a two-dimensional description of the magnetic properties.Item Open Access Towards fiber-coupled plasmonic perfect absorber superconducting nanowire photodetectors for the near- and mid-infrared(2023) Mennle, Sandra; Karl, Philipp; Ubl, Monika; Ruchka, Pavel; Weber, Ksenia; Hentschel, Mario; Flad, Philipp; Giessen, HaraldItem Open Access Correlations for computation and computation for correlations(2021) Demirel, Bülent; Weng, Weikai; Thalacker, Christopher; Hoban, Matty; Barz, StefanieQuantum correlations are central to the foundations of quantum physics and form the basis of quantum technologies. Here, our goal is to connect quantum correlations and computation: using quantum correlations as a resource for computation - and vice versa, using computation to test quantum correlations. We derive Bell-type inequalities that test the capacity of quantum states for computing Boolean functions within a specific model of computation and experimentally investigate them using 4-photon Greenberger-Horne-Zeilinger (GHZ) states. Furthermore, we show how the resource states can be used to specifically compute Boolean functions - which can be used to test and verify the non-classicality of the underlying quantum states. The connection between quantum correlation and computability shown here has applications in quantum technologies, and is important for networked computing being performed by measurements on distributed multipartite quantum states.Item Open Access Integrated optoelectronic devices using lab‐on‐fiber technology(2022) Ricciardi, Armando; Zimmer, Michael; Witz, Norbert; Micco, Alberto; Piccirillo, Federica; Giaquinto, Martino; Kaschel, Mathias; Burghartz, Joachim; Jetter, Michael; Michler, Peter; Cusano, Andrea; Portalupi, Simone LucaSilica fibers are nowadays cornerstones in several technological implementations from long‐distance communication, to sensing applications in many scenarios. To further enlarge the functionalities, the compactness, and the performances of fiber‐based devices, one needs to reliably integrate small‐footprint components such as sensors, light sources, and detectors onto single optical fiber substrates. Here, a novel proof of concept is presented to deterministically integrate optoelectronic chips onto the facet of an optical fiber, further implementing the electrical contacting between the chip and fiber itself. The CMOS‐compatible procedure is based on a suitable combination of metal deposition, laser machining, and micromanipulation, directly applied onto the fiber tip. The proposed method is validated by transferring, aligning, and bonding a quantum‐well based laser on the core of a multimode optical fiber. The successful monolithic device integration on fiber shows simultaneously electrical contacting between the laser and the ferrule, and 20% light in‐coupling in the fiber. These results pave new ways to develop the next generation of optoelectronic systems on fiber. The technological approach will set a new relevant milestone along the lab‐on‐fiber roadmap, opening new avenues for a novel class of integrated optoelectronic fiber platforms, featuring unrivaled miniaturization, compactness, and performances levels, designed for specific applications.