Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
710 results
Search Results
Item Open Access Investigating superconductivity by tunneling spectroscopy using oxide heterostructures(2017) Fillis-Tsirakis, Evangelos; Mannhart, Jochen (Prof. Dr.)Item Open Access Nonlinear optical microspectroscopy with few-cycle laser pulses(2017) Wan, Hui; Wrachtrup, Jörg (Prof. Dr.)Nonlinear optical (NLO) microscopy is a powerful tool in physics, chemistry, and material science it probes intrinsic optical properties of the sample without the need of labeling. In order to investigate the ultrafast processes in nonlinear materials with high spatial resolution, we need to combine both ultrashort pulses and techniques focusing them to the diffraction limit. Previously, few-cycle laser pulses have often been tightly focused using conventional microscope objectives. However, the propagation of an ultrashort pulse in optical materials, particularly in the glass of a high numerical aperture (N.A.) microscope objective, results in spatial and temporal distortions of the pulse electric field, which can severely affect its quality in the focus. By purely passive group delay dispersion (GDD) and third-order dispersion (TOD) management, in this thesis, we experimentally demonstrate in-focus diffraction-limited and bandwidth-limited few-cycle pulses by using high N.A. objectives. Based on these achievements, the performance of a novel few-cycle NLO microscope for both second-harmonic generation (SHG) imaging and microspectroscopy in the frequency- and time-domains was characterized. The inverse linear dependence of SHG intensity on the in-focus pulse duration was demonstrated down to 7.1 fs for the first time. The application of shorter in-focus pulses for the enhancement of SHG image contrast was successfully demonstrated on a single collagen (type-I) fibril as a biological model system for studying protein assemblies under physiological conditions. Beyond imaging, a collagen fibril has been found to act as a purely non-resonant χ(2) soft matter under the present excitation conditions, and its ratio of forward- to epi-detected SHG intensities allowed for the estimation of the fibril thickness, which corresponds well with atomic force microscopy (AFM) measurements. The ultrafast dephasing of the localized surface plasmon resonance (LSPR) in the metallic nanoparticles, that only occurs on a time scale of a few femtoseconds, has gained a lot of attraction in the field of nanoplasmonics. This thesis is the first systematic experimental demonstration of time-resolving ultrashort plasmon dephasing in single gold nanoparticles by using interferometric SHG spectroscopy with in-focus 7.3 fs excitation pulses in combination with linear scattering spectroscopy performed on the same nanoparticle. For nanorods, nanodisks, and nanorectangles, strong plasmon resonance enhanced SHG is observed, where the SHG intensity strongly depends on the spectral overlap between the LSPR band and the excitation laser spectrum. For single nanorods and nanorectangles, the polarization dependence of the SHG intensity was found to follow second-order dipole scattering, and the effect of size and shape on the LSPR properties was directly observed in the time-domain. Good agreement between experimental and simulated values of dephasing times and resonance wavelengths is obtained, which confirms that a common driven damped harmonic oscillator model for the LSPR in the nanoparticle can qualitatively explain both the linear scattering spectra in the frequency-domain and the SHG response in the time-domain. Resonance bands in linear transmission and scattering spectra have also been observed for nanoholes with sizes smaller than the wavelength of the incident light in a metal film, which are assigned to LSPR modes of the electric field distribution around the nanohole with qualitatively similar resonance properties as a nanoparticle. The polarization-resolved nonlinear optical properties of the single nanoholes with different shapes and symmetries were also reported. The objective of this thesis has been systematic SHG studies of the size effect in the LSPR of single nanoholes in metal films and of their ultrafast dephasing dynamics. Although, enhancement of both the forward- and epi-detected SHG emissions from single rectangular nanoholes are observed,however,no ultrafast dephasing dynamics of LSPRs in rectangular nanoholes could be time-resolved with our in-focus 7.3 fs excitation laser pulses, which indicates that contributions from LSPR enhanced SHG to the detected SHG signal are negligible. More work needs to be done in order to overcome the current experimental limitations. However, in this thesis, the polarization dependence of the forward- and epi-detected SHG intensity from the single rectangular nanohole was found to follow that of a second-order dipole pattern. While the SHG dipole pattern observed for rectangular nanoparticles is oriented parallel to its long-axis, the SHG dipole pattern of its complementary rectangular nanohole is oriented perpendicular to its long-axis. This observation represents the first experimental demonstration of Babinet’s principle in second-order nonlinear scattering of a single rectangular nanohole in a gold film.Item Open Access Microscopic calculation of line tensions(2008) Merath, Rolf-Jürgen Christian; Dietrich, Siegfried (Prof. Dr.)In this work the line tension has been determinded with molecular resolution, which in this context marks the forefront of research. A semi-microscopic line tension theory based on the sharp-kink approximation has been further developed. The sharp-kink results concerning wetting and line tension behavior deviate considerably from the fully microscopic results. A hybrid line tension theory has been introduced, which employs an improved effective interface potential for the SK line tension calculation. For most of the studied cases the results from this hybrid method describe the fully microscopic line tension values semi-quantitatively. However, for a tailored system with relatively strong spatial variations of the substrate potential and of the solid-liquid interfacial density the hybrid method fails and does not predict the correct order of magnitude of the line tension values. Hence in general the fully microscopic approach is required, if one is interested in quantitatively reliable line tension values or/and if the validity of the hybrid method for the considered system has not been checked. The calculation of the line tension of a liquid wedge is an important contribution for understanding the shape of very small droplets (below the micrometer range). Furthermore a proposal is given, how axisymmetric sessile droplets can be addressed efficiently within DFT.Item Open Access Long-term stability of capped and buffered palladium-nickel thin films and nanostructures for plasmonic hydrogen sensing applications(2013) Strohfeldt, Nikolai; Tittl, Andreas; Giessen, HaraldOne of the main challenges in optical hydrogen sensing is the stability of the sensor material. We found and studied an optimized material combination for fast and reliable optical palladium-based hydrogen sensing devices. It consists of a palladium-nickel alloy that is buffered by calcium fluoride and capped with a very thin layer of platinum. Our system shows response times below 10 s and almost no short-term aging effects. Furthermore, we successfully incorporated this optimized material system into plasmonic nanostructures, laying the foundation for a stable and sensitive hydrogen detector.Item Open Access Ambient pressure oxidation of Ag(111) surfaces : an in-situ X-ray study(2008) Reicho, Alexander; Dosch, Helmut (Prof. Dr.)The oxidation of metals plays an outstanding role in everyday life. Typical phenomena are the formation of rust on steel or oxide scales on copper, showing up as a green patina. The formation of metal oxides is not always an unwanted process. The functionality of many materials is directly related to their controlled oxidation. The most prominent examples are passivating oxide layers on stainless steel. Relevant for this thesis are industrially applied heterogeneous catalytic reactions for the synthesis of many chemical products, where gaseous reactants are in contact with the solid surface of the catalyst. Oxidation reactions are very important in this context, leading to a big need of understanding of these processes in research and development. Thereby, the active oxygen species on the surface and selectivity and poisoning of the catalyst have to be studied on an atomic scale. The high temperature and high pressure oxidation of the 4d transition metals Ru, Rh, Pd and Ag is a matter of particular interest, because these metals are widely used as oxidation catalysts. On Ruthenium one observes the formation of RuO2(110) bulk oxide islands at elevated temperatures and oxygen pressure. In the case of the Pd(100) and Rh(111) surface oxidation can lead to the formation of so-called surface oxides. These oxides are structurally related to the bulk oxide of the respective element. Furthermore, surface oxides are ultra thin oxides containing one metallic layer surrounded by two oxygen layers, giving rise to an oxygen-metal-oxygen sequence perpendicular to the surface plane. A future vision is to get a direct microscopic control of the emerging surface structures and ultimately of the real-time oxidation/reduction dynamics allowing one to tailor such catalytic reactions to better performance. A necessary prerequisite to the microscopic control is the full atomistic understanding of the surface structures which form at high temperature and at high oxygen pressures. Silver plays a unique role in heterogeneous catalysis. Supported Ag catalysts are used for the selective oxidation ('epoxidation') of ethylene and for the partial oxidation of methanol to formaldehyde. Ethylene oxide and its derivates are basic chemicals for industry, used in a many technologies with a world-wide production of more than 10 million tons as in medicine for disinfection, sterilization, or fumigation, or in transport and energy technologies for engine antifreeze and heat transfer. Because of its ability to kill most bacteria, formaldehyde is extensively used as disinfectant and as preservative in vaccinations. Therefore, the optimisation of these two Ag-supported catalytic reactions is of paramount importance. Current strategies employed in the industrial process to enhance selectivity include the empirical use of inhibitors (Cl) and promoters (Cs), however, on the way to a knowledge-based control of these reactions one has first to understand the surface structure of oxidized silver under relevant conditions in full detail. The formation of extended Ag(111) facets is observed on polycrystalline silver during the above industrial catalytic oxidation reactions, in turn fundamental research (experiment and theory) has been devoted to the detailed understanding of oxidation of this surface. The formation of an oxygen induced p(4x4) reconstruction on the Ag(111) surface is known since the early 70s. A surface oxide trilayer model, based on a three-layer slab of Ag2O(111), was proposed. Accordingly, the Ag(111) surface seemed to show a similar behaviour like Pd and Rh, being neighbours in the periodic table. Further theoretical calculations predicted the stability of this reconstruction under industrially relevant conditions. Nevertheless, several questions remained unsolved: the stability of the p(4x4) reconstruction under industrially relevant conditions was not checked experimentally, the structural model of the p(4x4) structure was not proven by a crystallographic method and previously unknown structures might play an important role for the catalytic activity of Ag(111) facets. Our experimental approach is based on the nowadays routinely available highly brilliant x-ray radiation produced by third generation synchrotron light sources. This radiation is used by us in three surface sensitive x-ray techniques. In-situ surface x-ray diffraction (SXRD) allows the identification and determination of structural models of surface reconstructions under industrially relevant conditions. This technique is combined with high resolution core level spectroscopy (HRCLS) and normal incidence x-ray standing wave absorption (NIXSW), giving insight into the local binding geometry of the oxygen and silver atoms.Item Open Access From Hermitian to non-Hermitian topological phases of matter(2019) Rui, Wenbin; Metzner, Walter (Prof. Dr.)The focus of this thesis lies on extending the theory of topological phases of matter from the Hermitian to the non-Hermitian regime. This includes not only the extension of conventional concepts such as topological invariants and topological boundary states in the theory of Hermitian topological phases, but also the exploration and characterization of entirely new topological phases unique to non-Hermitian systems.Item Open Access Modellierung der Adhäsion und Deformation von Mikrokapseln(2007) Graf, Peter; Seifert, Udo (Prof. Dr.)Mikrokapseln spielen eine wichtige Rolle beim Einschluß und der kontrollierten Freisetzung von Substanzen sowohl in industriellen Anwendungen als auch in der Medizin und den Biowissenschaften. Sie dienen ebenso als Modellsysteme für biologische Objekte wie Zellen oder Viruskapseln. Bei vielen dieser Anwendungen sind gute Kenntnisse über die mechanischen Eigenschaften nötig. Typischerweise wird die Kapsel zu diesem Zweck verformt und die dazu benötigten Kräfte werden gemessen. Die Deformation kann auf verschiedene Arten hervorgerufen werden, z. B. durch Adhäsion, äußere Kräfte oder Druckunterschiede zwischen der Innen- und Außenseite der Kapsel. In Experimenten wurde der Adhäsionsradius der Kapsel oder die zum Zusammendrücken der Kapsel benötigte Kraft gemessen. In der vorliegenden Dissertation wird die Adhäsion von Mikrokapseln und die Deformation durch äußere Kräfte auf theoretischem Wege untersucht. Es wird mit Mitteln der Elastizitätstheorie ein Modell entwickelt, mit dem sich die Deformation der Kapsel in Abhängigkeit von den angreifenden Kräften beschreiben läßt. In einer systematischen Untersuchung werden die Vorhersagen des Modells mit experimentellen Daten verglichen, um daraus die elastischen Parameter zu extrahieren.Item Open Access Einfluss paramagnetischer Defekte auf Transport und Rekombination in mikrokristallinem Silizium(2003) Bronner, Wolfgang; Mehring, Michael (Prof. Dr. rer. nat.)Dünne Halbleiterschichten haben ein großes technologisches Potential. TFT-Flachbildschirme oder Dünnschichtsolarzellen sind bereits etablierte Produkte auf dem Markt. Zu den aussichtsreichen Materialsystemen für derartige Anwendungen gehört mikrokristallines Silizium. Die Struktur von mikrokristallinem Silizium im Übergangsbereich vom amorphen zum einkristallinen Silizium ergibt fundamentale grundlagenphysikalische Fragestellungen. Der Schwerpunkt dieser Arbeit liegt auf der Untersuchung von mikrokristallinem Silizium. Ergänzend werden Untersuchungen an polymorphen Siliziumdünnfilmen vorgestellt. Ein breites Spektrum an experimentellen Methoden ermöglicht den Zugang zu vielseitigen Fragestellungen. Dabei handelt es sich um die konventionelle Elektronenspinresonanz (ESR) im Hochfeld, elektrisch detektierte ESR und um elektrooptische Experimente, wie das Experiment der modulierten Photoströme, die konstante Photostrommethode, die Methode des stationären Ladungsträgergitters und stationäre Photostrommessungen bei tiefen Temperaturen. Wie in dieser Arbeit anhand einer Computersimulation gezeigt wird, unterliegen die Ladungsträgerelektronen im mikrokristallinen Silizium einem Spinaustauschprozess. Bei tiefen Temperaturen erfolgt der Photostromtransport durch Energy-Loss Hopping auf Bandausläuferzuständen. Mit Hilfe der elektrisch detektierten ESR konnten Transport- und Rekombinationspfade in den Materialsystemen aufgeklärt werden. Das paramagnetischen Defekten dabei eine bedeutende Rolle zukommt, werden durch die Messungen an einer elektronenbestrahlten mikrokristallinen Probe untermauert.Item Open Access Hubbard and Kondo lattice models in two dimensions : a QMC study(2003) Feldbacher, Martin; Assaad, Fakher F. (Prof. Dr.)This thesis discusses mainly two Fermionic lattice systems, first a Kondo lattice with additional Hubbard interaction and second a Hubbard Hamiltonian augmented with additional spin and charge interactions. We first introduce the Quantum Monte Carlo technique, which is then employed to study the two respective systems. We present an innovation that allows to calculate time displaced Greens functions more efficiently. Compared with previously used numerically stable algorithms the new method gains an order of magnitude in speed, but is just as precise, and very simple to implement. In the second chapter we consider the Kondo lattice model in two dimensions at half filling. In addition to the Fermionic hopping integral t and the superexchange coupling J the role of a Coulomb repulsion U in the conduction band is investigated. We find the model to display a magnetic order-disorder transition in the U-J plane with a critical value of Jc which is decreasing as a function of U. The single-particle spectral function A(k,ω) is computed across this transition. We conclude that (i) the local screening of impurity spins determines the low-energy behavior of the spectral function and (ii) one cannot deform continuously the spectral function of the half-filled Hubbard model at J=0 to that of the Kondo insulator at J>Jc. In the third chapter we investigate the phase diagram of a new model that exhibits a first order transition between s-wave superconducting and antiferromagnetic phases. The model, a generalized Hubbard model augmented with competing spin-spin and pair-pair interactions, was investigated using the projector quantum Monte Carlo method. Upon varying the Hubbard U from attractive to repulsive, we find a first order phase transition between superconducting and antiferromagnetic states.Item Open Access Structure and electronic properties of epitaxial monolayer WSe2(2019) Mohammed, Avaise; Takagi, Hidenori (Prof. Dr.)