Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
12 results
Search Results
Item Open Access Sharp MIR plasmonic modes in gratings made of heavily doped pulsed laser-melted Ge1-xSnx(2023) Berkmann, Fritz; Steuer, Oliver; Ganss, Fabian; Prucnal, Slawomir; Schwarz, Daniel; Fischer, Inga Anita; Schulze, JörgItem Open Access Generation of terahertz radiation via the transverse thermoelectric effect(2023) Yordanov, Petar; Priessnitz, Tim; Kim, Min‐Jae; Cristiani, Georg; Logvenov, Gennady; Keimer, Bernhard; Kaiser, StefanTerahertz (THz) radiation is a powerful tool with widespread applications ranging from imaging, sensing, and broadband communications to spectroscopy and nonlinear control of materials. Future progress in THz technology depends on the development of efficient, structurally simple THz emitters that can be implemented in advanced miniaturized devices. Here, it is shown how the natural electronic anisotropy of layered conducting transition metal oxides enables the generation of intense terahertz radiation via the transverse thermoelectric effect. In thin films grown on off‐cut substrates, femtosecond laser pulses generate ultrafast out‐of‐plane temperature gradients, which in turn launch in‐plane thermoelectric currents, thus allowing efficient emission of the resulting THz field out of the film structure. This scheme is demonstrated in experiments on thin films of the layered metals PdCoO2 and La1.84Sr0.16CuO4, and model calculations that elucidate the influence of the material parameters on the intensity and spectral characteristics of the emitted THz field are presented. Due to its simplicity, the method opens up a promising avenue for the development of highly versatile THz sources and integrable emitter elements.Item Open Access Effects of load forecast deviation on the specification of energy storage systems(2023) Emde, Alexander; Märkle, Lisa; Kratzer, Benedikt; Schnell, Felix; Baur, Lukas; Sauer, AlexanderThe liberalization of the German energy market has created opportunities for end-consumers, including industrial companies, to actively participate in the electricity market. By making their energy loads more flexible, consumers can generate additional income and thus save money. Energy storage systems can be utilized to achieve the required flexibility by temporarily storing excess electrical energy in the form of heat, cold, or electricity for later use. This publication focuses on how the dimensionality of energy storage is influenced by load forecasting. The results show that inaccuracies in load forecasting lead to a direct over-dimensioning and thus, a deterioration of the economics of energy storage technologies. Using two scenario cases, it shows on the one hand how important good forecasts are and on the other hand that buffers must be included in the conceptual design in order to be able to compensate for forecast errors.Item Open Access Plasmonic gratings from highly doped Ge1-ySny films on Si(2021) Berkmann, Fritz; Ayasse, Markus; Schlipf, Jon; Mörz, Florian; Weißhaupt, David; Oehme, Michael; Prucnal, Slawomir; Kawaguchi, Yuma; Schwarz, Daniel; Fischer, Inga Anita; Schulze, JörgPlasmonic modes in metal structures are of great interest for optical applications. While metals such as Au and Ag are highly suitable for such applications at visible wavelengths, their high Drude losses limit their usefulness at mid-infrared wavelengths. Highly n-doped Ge1-ySny alloys are interesting possible alternative materials for plasmonic applications in this wavelength range. Here, we investigate the use of highly n-doped Ge1-ySny films grown directly on Si by molecular beam epitaxy with varying Sn-content from 0% up to 7.6% for plasmonic grating structures. We compare plasma wavelengths and relaxation times obtained from electrical and optical characterization. While theoretical considerations indicate that the decreasing effective mass with increasing Sn content in Ge1-ySny films could improve performance for plasmonic applications, our optical characterization results show that the utilization of Ge1-ySny films grown directly on Si is only beneficial if material quality can be improved.Item Open Access Measurement of transient overvoltages by capacitive electric field sensors(2024) Probst, Felipe L.; Beltle, Michael; Tenbohlen, StefanThe accurate measurement and the investigation of electromagnetic transients are becoming more important, especially with the increasing integration of renewable energy sources into the power grid. These sources introduce new transient phenomena due to the extensive use of power electronics. To achieve this, the measurement devices must have a broadband response capable of measuring fast transients. This paper presents a capacitive electric field sensor-based measurement system to measure transient overvoltages in high-voltage substations. The concept and design of the measurement system are first presented. Then, the design and concept are validated using tests performed in a high-voltage laboratory. Afterwards, two different calibration techniques are discussed: the simplified method (SM) and the coupling capacitance compensation (CCC) method. Finally, three recorded transients are evaluated using the calibration methods. The investigation revealed that the SM tends to overestimate the maximum overvoltage, highlighting the CCC method as a more suitable approach for calibrating transient overvoltage measurements. This measurement system has been validated using various measurements and can be an efficient and flexible solution for the long-term monitoring of transient overvoltages in high-voltage substations.Item Open Access Bending setups for reliability investigation of flexible electronics(2021) Saleh, Rafat; Barth, Maximilian; Eberhardt, Wolfgang; Zimmermann, AndréItem Open Access Band-gap and strain engineering in GeSn alloys using post-growth pulsed laser melting(2022) Steuer, Oliver; Schwarz, Daniel; Oehme, Michael; Schulze, Jörg; Mączko, Herbert; Kudrawiec, Robert; Fischer, Inga A.; Heller, René; Hübner, René; Khan, Muhammad Moazzam; Georgiev, Yordan M.; Zhou, Shengqiang; Helm, Manfred; Prucnal, SlawomirThe pseudomorphic growth of Ge1-xSnx on Ge causes in-plane compressive strain, which degrades the superior properties of the Ge1-xSnx alloys. Therefore, efficient strain engineering is required. In this article, we present strain and band-gap engineering in Ge1-xSnx alloys grown on Ge a virtual substrate using post-growth nanosecond pulsed laser melting (PLM). Micro-Raman and x-ray diffraction (XRD) show that the initial in-plane compressive strain is removed. Moreover, for PLM energy densities higher than 0.5 J cm-2, the Ge0.89Sn0.11 layer becomes tensile strained. Simultaneously, as revealed by Rutherford Backscattering spectrometry, cross-sectional transmission electron microscopy investigations and XRD the crystalline quality and Sn-distribution in PLM-treated Ge0.89Sn0.11 layers are only slightly affected. Additionally, the change of the band structure after PLM is confirmed by low-temperature photoreflectance measurements. The presented results prove that post-growth ns-range PLM is an effective way for band-gap and strain engineering in highly-mismatched alloys.Item Open Access Wafer-scale self-organized InP nanopillars with controlled orientation for photovoltaic devices(2015) Sanatinia, Reza; Berrier, Audrey; Dhaka, Veer; Perros, Alexander P.; Huhtio, Teppo; Lipsanen, Harri; Anand, SrinivasanA unique wafer-scale self-organization process for generation of InP nanopillars is demonstrated, which is based on maskless ion-beam etching (IBE) of InP developed to obtain the nanopillars, where the height, shape, and orientation of the nanopillars can be varied by controlling the processing parameters. The fabricated InP nanopillars exhibit broadband suppression of the reflectance, ‘black InP,’ a property useful for solar cells. The realization of a conformal p-n junction for carrier collection, in the fabricated solar cells, is achieved by a metalorganic vapor phase epitaxy (MOVPE) overgrowth step on the fabricated pillars. The conformal overgrowth retains the broadband anti-reflection property of the InP nanopillars, indicating the feasibility of this technology for solar cells. Surface passivation of the formed InP nanopillars using sulfur-oleylamine solution resulted in improved solar-cell characteristics. An open-circuit voltage of 0.71 V and an increase of 0.13 V compared to the unpassivated device were achieved.Item Open Access Particle-resolved simulation of the pyrolysis process of a single plastic particle(2024) Zhang, Feichi; Tavakkol, Salar; Galeazzo, Flavio C. C.; Stapf, DieterParticle-resolved simulations have been performed to study the pyrolysis process of a high-density polyethylene (HDPE) particle in an inert hot nitrogen flow. The simulations resolve the velocity and temperature boundary layers around the particle, as well as the gradients of temperature and concentration within the particle. The objective of this work is to gain an in-depth understanding of the effect of particle morphology-specifically, the particle size and shape-on the interplay between heat transfer and pyrolysis progress, as well as to assess the applicable particle size when using the Lagrangian concept for simulating plastic pyrolysis. In all simulation cases, the pyrolysis reaction is initiated at the external surface of the particle, where the particle is heated the fastest. The reaction front propagates inward toward the core of the particle until it is fully pyrolyzed. For particle diameters larger than 4 mm, distinct temperature gradients within the particle can be detected, leading to a temperature difference of more than 10 K between the core and the external surface of the plastic particle. In this case, the Lagrangian simulations yield a considerably slower conversion compared with the particle-resolved simulations. Moreover, the cylindrical particle in longitudinal flow has been found to be pyrolyzed more slowly compared with the spherical and shell-shaped particles, which is attributed to the enhanced heat transfer conditions for the cylindrical particle. The results reveal the importance of considering particle morphology when modeling plastic pyrolysis. In addition, the Lagrangian approach, which assumes particle homogeneity, is only applicable for particle diameters smaller than 2 mm when modeling plastic pyrolysis.Item Open Access Electro-active metaobjective from metalenses-on-demand(2022) Karst, Julian; Lee, Yohan; Floess, Moritz; Ubl, Monika; Ludwigs, Sabine; Hentschel, Mario; Giessen, HaraldSwitchable metasurfaces can actively control the functionality of integrated metadevices with high efficiency and on ultra-small length scales. Such metadevices include active lenses, dynamic diffractive optical elements, or switchable holograms. Especially, for applications in emerging technologies such as AR (augmented reality) and VR (virtual reality) devices, sophisticated metaoptics with unique functionalities are crucially important. In particular, metaoptics which can be switched electrically on or off will allow to change the routing, focusing, or functionality in general of miniaturized optical components on demand. Here, we demonstrate metalenses-on-demand made from metallic polymer plasmonic nanoantennas which are electrically switchable at CMOS (complementary metal-oxide-semiconductor) compatible voltages of ±1 V. The nanoantennas exhibit plasmonic resonances which can be reversibly switched ON and OFF via the applied voltage, utilizing the optical metal-to-insulator transition of the metallic polymer. Ultimately, we realize an electro-active non-volatile multi-functional metaobjective composed of two metalenses, whose unique optical states can be set on demand. Overall, our work opens up the possibility for a new level of electro-optical elements for ultra-compact photonic integration.