Universität Stuttgart

Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1

Browse

Filters

2015 - 2019112020 - 202517

Settings

Subject: search.filters.subject.540Start date: 2015Institute: search.filters.UBSInstitut.Max-Planck-Institut für Intelligente Systeme

Search Results

Now showing 1 - 10 of 28
  • Thumbnail Image
    ItemOpen Access
    Precipitation of nitrides in iron-based binary and ternary alloys; influence of defects and transformation-misfit stresses
    (2015) Akhlaghi, Maryam; Mittemeijer, Eric Jan (Prof. Dr. Ir.)
    The initial microstructure of the unnitrided specimen has a significant influence on the nitriding response of binary Fe-Me (Me: Mo or Al) alloys specimens. This effect was not investigated until now for the case of nitrided ternary Fe-Me1-Me2 alloys, the role of the initial microstructure was studied upon nitriding Fe-4.1 at.% Cr-7.9 at.% Al specimens. To this end, the recrystallized and cold-rolled specimens were nitrided at low nitriding temperature of 400 °C. Upon precipitation of misfitting coherent nitrides during nitriding of thin-foils of binary Fe-Me (Me: Cr and V) alloys, a hydrostatic tensile lattice-stain component results from the elastic accommodation of volume misfit of nitrides and ferrite matrix. The change of the ferrite-matrix lattice parameter can be traced upon precipitation of the nitrides by X-ray diffraction measurements. The theory originally developed for the case of imperfections (by Eshelby) in solids can be applied for quantitatively describing the lattice-parameter changes of the matrix, the nitrides and the aggregate (matrix+ nitrides) as function of volume fraction and type of nitrides.
  • Thumbnail Image
    ItemOpen Access
    Designing covalent organic framework‐based light‐driven microswimmers toward therapeutic applications
    (2023) Sridhar, Varun; Yildiz, Erdost; Rodríguez‐Camargo, Andrés; Lyu, Xianglong; Yao, Liang; Wrede, Paul; Aghakhani, Amirreza; Akolpoglu, Birgul M.; Podjaski, Filip; Lotsch, Bettina V.; Sitti, Metin
    While micromachines with tailored functionalities enable therapeutic applications in biological environments, their controlled motion and targeted drug delivery in biological media require sophisticated designs for practical applications. Covalent organic frameworks (COFs), a new generation of crystalline and nanoporous polymers, offer new perspectives for light‐driven microswimmers in heterogeneous biological environments including intraocular fluids, thus setting the stage for biomedical applications such as retinal drug delivery. Two different types of COFs, uniformly spherical TABP‐PDA‐COF sub‐micrometer particles and texturally nanoporous, micrometer‐sized TpAzo‐COF particles are described and compared as light‐driven microrobots. They can be used as highly efficient visible‐light‐driven drug carriers in aqueous ionic and cellular media. Their absorption ranging down to red light enables phototaxis even in deeper and viscous biological media, while the organic nature of COFs ensures their biocompatibility. Their inherently porous structures with ≈2.6  and ≈3.4 nm pores, and large surface areas allow for targeted and efficient drug loading even for insoluble drugs, which can be released on demand. Additionally, indocyanine green (ICG) dye loading in the pores enables photoacoustic imaging, optical coherence tomography, and hyperthermia in operando conditions. This real‐time visualization of the drug‐loaded COF microswimmers enables unique insights into the action of photoactive porous drug carriers for therapeutic applications.
  • Thumbnail Image
    ItemOpen Access
    Formation of lath martensite
    (2015) Löwy, Sarah; Mittemeijer, Eric Jan (Prof. Dr. Ir.)
    In this thesis the formation of different lath martensites was investigated upon cooling, particularly with regard to the mechanisms contributing to the transformation process. Upon very slow cooling of different Fe-Ni alloys and a maraging steel, all forming lath martensite, a discontinuous transformation behaviour was observed. This modulation of the transformation rate is ascribed to the interplay of chemical driving force, developing strain energy and its relaxation upon slow cooling. It is proposed that the modulation is caused by simultaneous formation of blocks in different martensite packages. Additionally, the influence of the Ni content on the transformation behaviour is presented as well as the influence of an externally applied force.
  • Thumbnail Image
    ItemOpen Access
    Upconversion nanoparticle‐covalent organic framework core-shell particles as therapeutic microrobots trackable with optoacoustic imaging
    (2025) Kim, Dong Wook; Wrede, Paul; Rodríguez‐Camargo, Andrés; Chen, Yi; Dogan, Nihal Olcay; Glück, Chaim; Lotsch, Bettina V.; Razansky, Daniel; Sitti, Metin
    Despite the development of various medical imaging contrast agents, integrating contrast signal generation with therapeutic and microrobotic functions remains challenging without complicated fabrication processes. In this study, upconversion nanoparticle‐covalent organic framework (UCNP‐COF) core-shell sub‐micron particles are developed that function as therapeutic microrobots trackable with multi‐spectral optoacoustic tomography (MSOT) imaging and can be loaded with desired therapeutic molecular agents in a customizable manner. The mechanism of optoacoustic signal generation in UCNP‐COF particles is attributed to the quenching of upconversion luminescence emitted by the UCNPs, which is absorbed by the encapsulating COF and subsequently converted into acoustic waves. Unlike other microparticulate agents previously imaged with MSOT, UCNP‐COF particles do not pose concerns about their stability and biocompatibility. Simultaneously, the mesoporous texture of the COF provides a large surface area, allowing for the efficient loading of various drug molecules, which can be released at target sites. Furthermore, the magnetic UCNP‐COF Janus particles can be magnetically navigated through in vivo vasculature while being visualized in real‐time with volumetric MSOT. This study proposes an approach to design photonic materials with multifunctionality, enabling high‐performance medical imaging, drug delivery, and microrobotic manipulation toward their future potential clinical use.
  • Thumbnail Image
    ItemOpen Access
    Thermodynamics and kinetics of the oxidation of amorphous Al-Zr alloys
    (Stuttgart : Max-Planck-Institut für Intelligente Systeme (ehemals Max-Planck-Institut für Metallforschung), 2015) Weller, Katharina; Mittemeijer, Eric J. (Prof. Dr. Ir.)
    The present thesis presents a comprehensive investigation of the thermal oxidation of amorphous Al-Zr alloys. The oxide composition and microstructure, as well as the oxidation kinetics and oxidation mechanism of amorphous Al-Zr alloys upon thermal oxidation at relatively low oxidation temperatures of 350 - 400 °C and at high oxidation temperatures of 500 - 560 °C have been investigated. The phase and microstructural development upon oxidation of amorphous Al-Zr alloys, as well as the oxidation-induced changes in the alloy substrate, were investigated by a combinatorial experimental approach using X-ray diffraction (XRD), cross-sectional (analytical) transmission electron microscopy (TEM), Auger electron spectroscopy (AES) sputter-depth profiling and spectroscopic ellipsometry (SE). Furthermore, the corrosion behavior of as-deposited and oxidation-treated amorphous Al-Zr alloys have been investigated as function of the alloy composition and oxidation conditions by employing an electrochemical microcapillary technique.
  • Thumbnail Image
    ItemOpen Access
    Kinetics of phase transformations
    (2015) Rheingans, Bastian; Mittemeijer, Eric Jan (Prof. Dr. Ir.)
    In this thesis, the kinetics of heterogeneous solid-state phase transformations in different prototype experimental systems are investigated with focus on the development of new strategies for kinetic modelling using mean-field kinetic models. Topics cover the interrelation between the kinetic model description and the amount of available experimental information, the interpretation of kinetic model parameters determined upon model fitting and the coupling of kinetic models to external (thermodynamic) input data. Experimental studies include the crystallisation kinetics of metallic glasses and precipitation kinetics in supersaturated alloys.
  • Thumbnail Image
    ItemOpen Access
    Novel X-ray lenses for direct and coherent imaging
    (2019) Sanli, Umut Tunca; Schütz, Gisela (Prof. Dr.)
  • Thumbnail Image
    ItemOpen Access
    Deposition and characterization of multi-functional, complex thin films using atomic layer deposition for copper corrosion protection
    (2022) Dogan, Gül; Schütz, Gisela (Prof. Dr.)
    This thesis focuses on ALD thin film protection properties against corrosion of copper to develop an understanding of material interface properties and to develop novel thin films processes. This understanding is then applied to enhance materials with potential use in semiconductor devices. The main research objectives are listed below: Understanding corrosion protection properties of ALD thin films: - Development of protective thin films by combining different oxide layers - To characterize the protection properties at high temperatures and in aggressive environments, - To understand the interaction of copper and ALD protection layers when exposed to high temperatures, - Finding the optimum deposition parameters to achieve defect-free thin layers for best corrosion protection Application of ALD oxide thin films for copper corrosion protection in semiconductor devices: - Structuring the ALD thin films to make reliable interface for copper-copper interconnects with micromachining methods such as laser drilling and plasma etching - To remove ALD layers in a localized, selective way without degradation of the underlying copper layer
  • Thumbnail Image
    ItemOpen Access
    Mixed-length multivariate covalent organic framework for combined near-infrared photodynamic therapy and drug delivery
    (2025) Rodríguez-Camargo, Andrés; Yildiz, Erdost; Juela, Diego; Fischer, Felix Richard; Graf, Daniel; Rath, Bibhuti Bhusan; Ochsenfeld, Christian; Bauer, Matthias; Sitti, Metin; Yao, Liang; Lotsch, Bettina V.
    Covalent organic frameworks (COFs) have been emerging as versatile reticular materials due to their tunable structures and functionalities, enabled by precise molecular engineering at the atomic level. While the integration of multiple components into COFs has substantially expanded their structural complexity, the strategic engineering of diverse functionalities within a single framework via the random distribution of linkers with varying lengths remains largely unexplored. Here, we report a series of highly crystalline mixed-length multivariate COFs synthesized using azobenzene and bipyridine as linkers, where tuning the ratio of linkers and incorporating palladium effectively modulates the balance between near-infrared (NIR) light absorption and catalytic sites for NIR-generation of hydrogen peroxide (H2O2). Capitalizing on the deep tissue penetration of NIR light and the generated H2O2 as reactive oxygen species, as a proof of concept, the optimal mixed-length multivariate COF reduces breast cancer cell viability by almost 90% after 1 h of irradiation in a combined in vitro photodynamic therapy and drug delivery.
  • Thumbnail Image
    ItemOpen Access
    Active colloidal propulsion over a crystalline surface
    (2017) Choudhury, Udit; Straube, Arthur V.; Fischer, Peer; Gibbs, John G.; Höfling, Felix
    We study both experimentally and theoretically the dynamics of chemically self-propelled Janus colloids moving atop a two-dimensional crystalline surface. The surface is a hexagonally close-packed monolayer of colloidal particles of the same size as the mobile one. The dynamics of the self-propelled colloid reflects the competition between hindered diffusion due to the periodic surface and enhanced diffusion due to active motion. Which contribution dominates depends on the propulsion strength, which can be systematically tuned by changing the concentration of a chemical fuel. The mean-square displacements (MSDs) obtained from the experiment exhibit enhanced diffusion at long lag times. Our experimental data are consistent with a Langevin model for the effectively two-dimensional translational motion of an active Brownian particle in a periodic potential, combining the confining effects of gravity and the crystalline surface with the free rotational diffusion of the colloid. Approximate analytical predictions are made for the MSD describing the crossover from free Brownian motion at short times to active diffusion at long times. The results are in semi-quantitative agreement with numerical results of a refined Langevin model that treats translational and rotational degrees of freedom on the same footing.