Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
21 results
Search Results
Item Open Access Analytical energy gradients for open-shell local second-order Møller-Plesset perturbation theory and applications to large molecules(2018) Dornbach, Mark; Werner, Hans-Joachim (Prof. Dr.)Item Open Access PFG-NMR studies of ATP diffusion in PEG-DA hydrogels and aqueous solutions of PEG-DA polymers(2018) Majer, Günter; Southan, AlexanderAdenosine triphosphate (ATP) is the major carrier of chemical energy in cells. The diffusion of ATP in hydrogels, which have a structural resemblance to the natural extracellular matrix, is therefore of great importance to understand many biological processes. In continuation of our recent studies of ATP diffusion in poly(ethylene glycol) diacrylate (PEG-DA) hydrogels by pulsed field gradient nuclear magnetic resonance (PFG-NMR), we present precise diffusion measurements of ATP in aqueous solutions of PEG-DA polymers, which are not cross-linked to a three-dimensional network. The dependence of the ATP diffusion on the polymer volume fraction in the hydrogels, φ, was found to be consistent with the predictions of a modified obstruction model or the free volume theory in combination with the sieving behavior of the polymer chains. The present measurements of ATP diffusion in aqueous solutions of the polymers revealed that the diffusion coefficient is determined by φ only, regardless of whether the polymers are cross-linked or not. These results seem to be inconsistent with the free volume model, according to which voids are formed by a statistical redistribution of surrounding molecules, which is expected to occur more frequently in the case of not cross-linked polymers. The present results indicate that ATP diffusion takes place only in the aqueous regions of the systems, with the volume fraction of the polymers, including a solvating water layer, being blocked for the ATP molecules. The solvating water layer increases the effective volume of the polymers by 66%. This modified obstruction model is most appropriate to correctly describe the ATP diffusion in PEG-DA hydrogels.Item Open Access Spectroscopic investigations of the magnetic anisotropy of lanthanide- and cobalt-based molecular nanomagnets(2016) Rechkemmer, Yvonne; Slageren, Joris van (Prof. Dr.)Single-molecule magnets are metal complexes exhibiting an energy barrier for spin reversal, leading to magnetic bistability and slow relaxation of the magnetization. Their potential for practical applications such as high-density magnetic data storage was recognized early on and with the goal of achieving high energy barriers, different kinds of single-molecule magnets have been synthesized. The quadratic dependence of the barrier height on the spin motivated chemists to synthesize metal complexes with very high total spins; however, with limited success. It was shown that high spins come along with low anisotropies and increased interest thus focused on the synthesis and investigation of (mononuclear) complexes of highly anisotropic metal centers, e.g. lanthanide or cobalt complexes. Although rather high energy barriers can be achieved in such systems, practical application remains problematic and has not been realized yet. Reasons are for example the lack of rational design criteria and the complex interplay of different magnetic relaxation pathways. The aim of this work was therefore the comprehensive magnetic and spectroscopic investigation of selected molecular lanthanide and cobalt compounds in order to obtain a deeper insight into the correlation of molecular and electronic structures as well as the corresponding magnetic properties. The applied spectroscopic methods included electron paramagnetic resonance spectroscopy, far-infrared spectroscopy and optical methods. Special emphasis was placed on magnetic circular dichroism (MCD) spectroscopy, which served as a main tool for electronic structure determination. However, since the MCD-spectrometer was not part of the available experimental equipment at the University of Stuttgart, its design, setup and characterization were the first part of this work. In the further course of this work MCD-spectroscopy was employed for the electronic structure determination of selected lanthanide and cobalt compounds. The studied lanthanide compounds were literature-known molecular tetra-carbonates of erbium (1-Er) and dysprosium (1-Dy). Detailed magnetometric studies showed that both 1-Er and 1-Dy are field-induced single-molecule magnets; however, 1-Er and 1-Dy show significant differences in their magnetic relaxation behavior. The magnetic studies were complemented by detailed spectroscopic investigations.The combination of far-infrared-, luminescence- and MCD-spectroscopy allowed for the experimental determination of 48 energy levels for 1-Er and 55 levels for 1-Dy, which built the foundation for the subsequent crystal field analysis and electronic structure determination. In addition, the results of EPR-spectroscopic studies were used for fine-tuning and verifying the respectively determined crystal field parameters. Calculating the magnetic dipole strengths for transitions between the relevant states led to a quantitative understanding of the magnetic relaxation pathways. Besides the investigation of lanthanide compounds, this thesis deals with two classes of cobalt complexes. The first class comprises mononuclear complexes in which one Co(II) ion is ligated by the nitrogen donors of two doubly deprotonated 1,2-bis(methanesulfonamido)-benzene-ligands. Rather acute N-Co-N bite angles indicate strong deviations from ideal tetrahedral symmetry. The static magnetic properties hint at very high energy barriers for spin reversal and with the help of far-infrared spectroscopy, largely negative axial zero-field splitting parameters were determined. The corresponding energy barriers belong to the highest ever reported for 3d-transition metal complexes and investigating the dynamic magnetic properties confirmed single-molecule magnet behavior. The unique magnetic properties were fully explained by analyzing spectroscopic results. The MCD-spectra showed intense signals that were assigned to spin-allowed d-d-transitions. Subsequent crystal field analysis revealed that the strong axial crystal field generated by the ligands leads to a large splitting of the electronic terms and thus in turn to a relatively small energy gap between the electronic ground state and the first excited state. The resulting increase in second-order spin-orbit coupling explains the high energy barriers observed in the studied complexes. The second class of cobalt compounds studied in this work included dimers of distorted octahedrally coordinated Co(II) ions bridged by symmetrical or asymmetrical quinone based bridging ligands. The main focus of investigation lay on the impact of the bridging ligand on the magnetic coupling between the cobalt centers. Thus, the magnetic properties of the complexes were studied with the help of static susceptibility and magnetization measurements and analyzed by means of different models. Depending on the bridging ligand, different signs for the exchange coupling constants were found. The varying signs can be explained by different relative contributions of possible exchange paths, influenced by the different substituents at the bridging ligands or slight geometry differences. The observations indicate that electron withdrawing substituents favor ferromagnetic couplings, which are preferred in the context of molecular magnetism. All in all, it can be concluded that this work provides a contribution to the deeper understanding of the features relevant for single-molecule magnets. The electronic structure determination for selected lanthanide and cobalt complexes applying advanced magnetometric and spectroscopic techniques not only led to an understanding of the static and dynamic magnetic properties but also allowed for the development of design criteria and new approaches for improved single-molecule magnets in the future.Item Open Access Modeling and simulation of closed low-pressure adsorbers for thermal energy storage(2019) Schäfer, Micha; Thess, André (Prof. Dr. rer. nat.)Closed low-pressure adsorption systems can be applied for thermal energy storage. Their performance is determined by the mass and heat transport processes in the adsorber. Therefore, thorough knowledge of these transport processes is required for further storage development. The present thesis contributes to this by providing detailed models of closed low-pressure adsorbers and by conducting simulations over a broad range of parameters and configurations. The focus is on adsorbers of larger scale (length L = 0.1 . . . 1 m) and on the discharging process. As the adsorption pair, binderless zeolite 13X with water is examined. The models are developed in a stepwise manner from pore to storage scale. The Finite-Difference-Method is implemented to numerically solve the models. Simulations are conducted for defined reference cases as well as over a broad range of geometric and process parameters. The reference cases are analyzed in detail to gain a better understanding of the transport processes. Furthermore, the results are analyzed with respect to two particular modeling aspects: equilibrium assumptions and rarefaction effects (e. g. slip effect). With respect to the application, the discharging performance is analyzed in terms of thermal power and a defined discharging degree. Both the adsorber and the adsorbent configurations are varied. In addition, the effect of the discharging conditions is evaluated. Finally, one exemplary charging process is examined. The detailed analysis of the reference cases reveals that the mass and heat transport and the adsorption processes are strongly coupled and can only be understood in their interaction. For onedimensional adsorber configurations, that is the mass and heat transport are in the same direction, the discharging process is generally limited by the heat transport. This leads to insufficient thermal power and unsuitable discharging durations of up to one year. In contrast, for two-dimensional adsorber configurations, that is the mass and heat transport are in perpendicular directions, the discharging process can be limited either by the mass or heat transport or by the adsorption. The limitation depends on the configuration of the adsorber and adsorbent. Moreover, the twodimensional adsorber configurations can provide sufficient thermal power. With respect to the modeling, it is found that the assumption of a uniform pressure distribution is applicable for one-dimensional adsorber configurations. In contrast, for two-dimensional configurations, no equilibrium assumptions can be applied in general. However, for powder adsorbent it is always valid to assume local adsorption equilibrium. Regarding the rarefaction effects in twodimensional adsorber configurations with honeycombs and granules, the slip effect is relevant for small channel and particle diameters (d = 1 mm). For adsorbers with powder adsorbent, the reduction of the effective heat conductivity due to the rarefaction effect becomes relevant. With respect to the application, the variation of the adsorber configuration shows that the volumetric thermal power generally decreases with increasing adsorber length. Furthermore, the power decreases with increasing width between the parallel heat exchanger plates in the adsorber. Regarding the adsorbent configuration in two-dimensional adsorber configurations, it is found that the volumetric thermal power can be optimized by variation of the channel or particle diameter. Interestingly, the optima for peak and mean power do not coincide. In addition, the discharging degree is found to strongly depend on the discharging conditions in terms of discharging temperature and volume flow of the heat transfer fluid extracting the heat from the adsorber. In general, the discharging degree decreases with increasing discharging temperature. Similarly, the discharging degree decreases with increasing volume flow of the heat transfer fluid. Finally, the analysis of an exemplary charging process revealed that the pressure in the adsorber can increase significantly (> 50%) due to the desorption.Item Open Access Novel X-ray lenses for direct and coherent imaging(2019) Sanli, Umut Tunca; Schütz, Gisela (Prof. Dr.)Item Open Access Chirality effects in thermotropic and lyotropic nematic liquid crystals under confined geometries(2019) Dietrich, Clarissa; Giesselmann, Frank (Prof. Dr.)Chirality is a phenomenon in nature that appears across all disciplines of natural science, from biology to mathematics. The spontaneous formation of chiral structures in a system of achiral components is known as spontaneous mirror symmetry breaking and is by itself of fundamental interest leading also towards the question of the origin of homochirality in nature in general. In this work, we show that by means of the topology imposed by the confining geometry and by interfacial boundary conditions - in combination with the physical properties of a liquid crystal - spontaneous mirror symmetry broken structures can be obtained. They are analyzed, inter alia, with respect to the types of geometrical confinements used, e.g. how the confinement amplifies, induces, and influences the detection of chirality effects in order to facilitate the measurement of tiny amounts of chiral additives qualitatively and quantitatively.Item Open Access Modeling and simulation of electronic excitation in oxygen-helium discharges and plasma-assisted combustion(2018) Kuntner, Nikolaj; Riedel, Uwe (Prof. Dr. rer. nat.)The present work concerns the generation of electronically excited oxidizers in non-thermal discharges in the context of plasma-assisted hydrogen and methane combustion at atmospheric pressures. These conditions are of practical relevance for the combustion technology. However, as the conversion of electrical power into particular, chosen chemical degrees of freedom is facilitated by low molecular interaction, the atmospheric parameter range is often neglected in the literature. This work provides the design and validation of accurate and efficient computational models for several experiments in this parameter range.Item Open Access Wetting, de-icing and anti-icing behavior of microstructured and plasma-coated polyurethane films(2019) Grimmer, Philipp E. S.; Hirth, Thomas (Prof. Dr. rer. nat.)Ice build-up on surfaces, for example on wings of airplanes or on rotor blades of wind turbines, impairs the functionality of transportation vehicles or technical systems and reduces their safety. Therefore, functional anti-ice surfaces are being researched and developed, which shall enable an easy removal or reduce the amount of ice on the surfaces at risk. The starting hypothesis for this work is that superhydrophobic polyurethane (PU) films with microstructure base diameters of 35 µm or more reduce the wetting by water, show a low ice adhesion for easy removal of ice and reduce or delay icing. Superhydrophobic PU films for passive anti- and de-icing were created by hot embossing and plasma enhanced chemical vapor deposition (PECVD). The hot embossing process as well as the plasma coating and etching processes were analyzed for the dependence of the surface characteristics on different process parameters. The functionalized PU films were characterized for their surface topography, surface chemistry, stability against erosion, wettability, ice adhesion and icing behavior. For comparison, the ice adhesion and icing behavior were examined on relevant technical materials (aluminum, titanium, copper, glass, epoxy resin of carbon fiber reinforced polymer and other fluoropolymers) and on some commercial anti-ice coatings. The PU films were chemically analyzed by IR spectroscopy. As the first process step for functionalization, microstructures of cylindrical, elliptical or linear shape were imprinted in PU films by a hot embossing technique with different ns-pulsed laser-drilled stamps and characterized by several microscopy methods. The microstructures had heights of 15 µm to 140 µm, diameters or widths of 35 µm to 300 µm and distances (pitch values) of 50 µm to 500 µm. The embossing process was analyzed and optimized in terms of the process parameters temperature, pressure, time, PU film release temperature and reproducibility of the microstructures. In a second functionalization step (PECVD) the microstructured surfaces were coated with thin, hydrophobic plasma polymers using different fluorocarbon precursors (CHF3, C3F6 and C4F8) or hexamethyldisiloxane (HMDSO). Different process parameters for plasma coating and etching (Ar or O2 plasmas) were used in order to create various nanoscale roughness values. Electron spectroscopy for chemical analysis (ESCA), spectroscopic ellipsometry and atomic force microscopy (AFM) were used for analysis of the chemical composition, the thickness and the nanoroughness of the plasma polymers. The functionalizations, especially the plasma coatings, were completely worn off by a UV/water weathering test (1000 h, X1a CAM 180 Test, SAE J-2527), but showed sufficient stability against sand erosion (DIN 52348), in a long-term outdoor test for 13.5 months and against fivefold repeated pull-off of ice. The silicone-like plasma coatings were more stable than the fluorocarbon plasma coatings. The wetting behavior of water was determined by static, advancing and receding contact angle measurements. Static contact angle measurements with diiodomethane (DIM) were made for determination of the surface free energies of the relevant surfaces. Advancing contact angles of over 150° and very low contact angle hysteresis values below 10° were reached on some of the cylindrically and elliptically structured PU samples with microstructure base diameters in the range of 35 µm to 50 µm. The measured water advancing contact angles did not reach the theoretical values of the Cassie-Baxter state. Starting from a mixed wetting state near Cassie-Baxter in case of the superhydrophobic PU surfaces, they approached the Wenzel state with an increasing pitch/diameter (P/d) factor. Fluorescence laser scanning microscopy images were taken of some microstructured, uncoated or plasma coated samples during the wetting by a water drop containing a fluorescent dye. These images show the Wenzel state or a mixed wetting state by visualization of the interface between the water droplet and the surface. A new icing test chamber and a test setup were developed for characterization of the ice adhesion and the icing behavior. The tensile ice adhesion was measured at -20 °C by pull-off of ice cylinders (highly purified water, (<0.056 µS/cm, diameter of 4 mm, similar to the diameter of large raindrops) and compared to the theoretical values and the wetting behavior. The technical material surfaces measured for comparison showed a high ice adhesion, which led to cohesive fractures especially on the metal surfaces, whereas some of the commercial anti-ice coatings showed lower ice adhesion values. The flat, plasma coated PU surfaces showed adhesive fractures with a reduced ice adhesion compared to the technical material surfaces and uncoated PU and revealed a good correlation of the ice adhesion with the wetting behavior of water (work of adhesion). On the other hand, the microstructured PU surfaces showed a greatly increased ice adhesion in comparison to the flat PU and technical material surfaces which was enhanced even further by the plasma coatings and did not correlate with the wetting behavior. The reason for this is the wetting transition from the Cassie-Baxter to the Wenzel state during the cooling or freezing process, leading to an increased ice-surface contact area and mechanical interlocking of the ice with the micro- and nanostructures. The freezing of water drops was examined in thermodynamic equilibrium (static experiment) and under quasi-steady conditions (dynamic experiment). In the static experiment, 15 µl water drops (corresponding to medium to large raindrops) at room temperature were dispensed onto a cold surface at a constant temperature of -20 °C. The freezing delay times, the crystallization times and the total freezing times were measured and compared to calculated expected values. On the flat samples, the freezing delay times could be extended by the plasma treatments. On the microstructured samples, the freezing (nucleation) could sometimes be delayed even further, but not always reproducible because of an unstable Cassie-Baxter state. In the dynamic experiment, 25 µl water drops (corresponding to large raindrops) were cooled down in quasi-steady conditions with the surface and the surrounding atmosphere by a constant, low cooling rate of 1 K/min while the water drop temperature was measured by an IR camera for determination of the surface-specific nucleation temperature and crystallization time. A lower nucleation temperature could be measured on the flat, plasma coated PU surfaces compared to uncoated PU and the hydrophilic glass and metal surfaces. The superhydrophobic PU surfaces did not show a further reduction of the nucleation temperature because of an unstable Cassie-Baxter state. The resulting measured nucleation temperatures were compared to the expected values calculated with an enhanced nucleation theory including a quasi-liquid interfacial layer of the ice nucleus and a Poisson process. Overall, it is shown that hot embossing and PECVD are useful processes for creating superhydrophobic PU surfaces with regard to a roll-to-roll process. The flat, plasma coated PU films show a reduced ice adhesion and lowered nucleation temperature compared to the relevant technical material surfaces. The microstructured, plasma coated PU films are far more water repellent than the flat, plasma coated PU surfaces or the other technical materials. However, the microstructures with base diameters of 35 µm or more and the nanoroughness of the plasma coatings cannot stabilize the Cassie-Baxter state of a freezing water drop enough for a low ice adhesion or a significant decrease of the nucleation temperature. These superhydrophobic PU films are therefore not more icephobic than the flat, plasma coated PU films. In the outlook, the reduction of the geometrical parameters of the microstructures (diameter D, distance P) and nanostructures (curvature radius R) of the surface functionalizations for lower ice adhesion values and nucleation temperatures is proposed.Item Open Access Ion beam lithographic and multilayer fresnel zone plates for soft and hard X-rays: nanofabrication and characterization(2015) Keskinbora, Kahraman; Schütz, Gisela (Prof. Dr.)X-ray microscopy has become an important analytical characterization method for a plethora of applications in materials science, physics, chemistry and biology, thanks to the emergence of modern synchrotron radiation facilities. These facilities enable high brilliance, energy tunable, variable polarization X-rays which gives access to mass density, elemental, chemical, electronic and magnetic properties of materials. In the soft X-ray energies nearly all elements can be probed by spectromicroscopic methods. Another important property of synchrotron radiation is the time structure in the ns to ps range, which can be utilized for sophisticated time resolution studies. These opportunities can be combined with high spatial resolution which is determined by the focusing method and the optic. Focusing of X-rays has historically been a difficult task due to strong absorption and weak phase shift of X-rays within matter. The required phase shift of X-rays, which depends on the real part of the complex refractive index, differs from 1 (the vacuum refractive index) only on the order of 10^-2 to 10^-6 and conventional lenses do not work. One very successful X-ray optic is the Fresnel Zone Plate (FZP), a diffractive optic that act as a lens under certain conditions and can focus X-rays to nanometer sized spots. The resolution of the FZP depends on the width of the outermost zone and is highly correlated with the smallest feature that can be fabricated. Conventionally, the e-beam lithography (EBL) is used for production FZPs which could resolve up to 10 nm structures with serious limitations. One difficulty of EBL is its ever increasing complexity for many-step fabrication of smaller features or intricate geometries. Therefore, EBL is mostly constrained to planar, binary geometries with moderate efficiencies strongly decreasing with energy and not effective for hard X-rays. Special 3D geometries in the form of kinoform lenses can theoretically have 100 % focusing efficiencies. Attempts to approximate these geometries via EBL increased the number of process steps even further. The smallest FZP feature size even for low aspect ratios achievable via EBL is fundamentally limited due to the proximity effect which is the interaction and spread of electrons within the resist material. We addressed these issues by focusing our research on alternative FZP fabrication techniques as high-speed ion beam lithography (IBL), and gray scale ion lithography to realize efficient kinoforms. Another approach towards full-material multilayer FZPs with infinite aspect ratio was based on atomic layer deposition (ALD) with subsequent ion beam slicing. Each of these three methods targets specific challenges faced by the e-beam lithography based FZP fabrication techniques. All the fabricated FZPs were tested for their resolution and efficiency performances at a state of the art scanning transmission X-ray microscope at BESSY for soft X-rays and/or at optical test stations at ESRF and PETRA III for hard X-rays. Using IBL the rapid preparation of a 110 nm thick Au FZP with 50 µm diameter and 50 nm ∆r in less than 13 minutes is demonstrated. Employed for X-ray microscopy, the FZP clearly resolved 28.5 nm features with a cut-off of 24.3 nm at ~1120 eV. Additional process improvements were made towards smaller zones with higher zone quality. They allowed the preparation of a FZP with 30 nm outermost half-period remarkably, in about 8 min. This FZP was shown to clearly resolve 21 nm features on a multilayer test object with large room for improvement. This high through-put FZP production route is of special interest not only concerning the low cost and easy availability. A large array of these optical components is attractive, for experiments such as one-shot ultra-high brilliance FEL investigations due to the radiation damage or for instance for coded-aperture arrays for high-angle resolving X-ray astronomy. Towards fabrication of kinoforms for high efficiency X-ray focusing, we have performed various materials optimization studies in order to achieve a high surface quality optic. After various trials the materials were finally optimized and the fabricated lenses achieved more than 14 % absolute diffraction efficiency that is almost 90 % compared to the theoretical prediction. This confirms how closely we were able to replicate the ideal three dimensional surface relief structure for the first time. It was possible to carry out imaging with these lenses with half-pitch resolutions down to 60 nm. The kinoform lenses were tested at the soft X-ray range where a significant absorption is present in materials. These results also potentially pave the way for very high efficiency hard X-ray focusing which can in principle be utilized in laboratory based X-ray sources, X-ray astronomy and the new rising field of X-ray ptychography. To fabricate high resolution ML-FZPs, Al2O3/Ta2O5multilayers, deposited on a smooth glass optical fiber via atomic layer deposition using non-dedicated instruments were carefully cut-out, sliced and polished to a high quality surface finish using focused ion beams. Following the transfer of the slice to a TEM grid as holder the slices were polished to a high surface finish quality, also via a focused ion beam. Fabricated ML-FZPs were synchrotron tested using an in-house constructed 2-axis tilt stage specially designed for aligning ML-FZP with respect to the X-ray optical axis. The results showed that it was possible to resolve 21 nm features in direct imaging at 1200 eV and sub-30 nm focusing at 8 keV. This is the highest demonstrated resolving power for a multilayer type FZP, to date to the best of our knowledge. Results exhibit the potential for high-resolution hard X-ray focusing where this type of optics are especially efficient. For ultra-high resolution hard and soft X-ray imaging, with potentially achievable ∆r of a few nm is well below what can be achieved through any lithography method available today.Item Open Access Structural and electronic properties of nickelate heterostructures(2016) Wrobel, Friederike; Keimer, Bernhard (Prof. Dr.)The fabrication of thin films and multilayers has led to the discovery of novel functional properties which are widely used in electronic devices nowadays. The limit of such a material design is atomic layer-by-layer deposition which was made possible through shuttered molecular beam epitaxy (MBE) growth. In the course of this thesis project a newly developed oxide MBE system was used to grow two different types of nickelate heterostructures, namely superlattices (SLs) consisting of metallic and paramagnetic LaNiO3 sandwiched between a large band-gap insulator and a combination of lanthanum nickelate and cuprate layers into a single hybrid structure. The former type was intensively studied in the last years and a transition to a weakly insulating, antiferromagnetically ordered state was observed in samples where the LaNiO3 thickness had been reduced to only two unit cells. So far little was known about the influence of the growth method on the defects in the samples and consequently on their physical properties. The use of oxide MBE enabled us to improve the overall sample quality of nickelate SLs and to design a novel material. We first optimized the growth of LaNiO3 and thoroughly analyzed the heterostructures by synchrotron-based x-ray diffraction, transmission electron microscopy, and temperature-dependent electrical resistivity. Furthermore we conducted in-depth studies, including x-ray absorption and magneto-transport measurements. The knowledge gained thereby was used grow new, layered nickelate-cuprate hybrid structures with novel electronic and magnetic properties.
- «
- 1 (current)
- 2
- 3
- »