Generation of bio-based, shape- and temperature-stable three-dimensional nonwoven structures using different polyhydroxyalkanoates

Abstract

Recent research has shown the potential of polyhydroxyalkanoates (PHAs), particularly poly(3–hydroxybutyrate) (P3HB), to form nonwoven structures with fine fiber diameter distributions ranging from 2.5 µm to 20 µm during the meltblow process. The shortcomings of existing fabrics of this type include high brittleness, low elongation at break (max. 3%), and a lack of flexibility. Furthermore, the high melt adhesion and the special crystallization kinetics of PHAs have commonly been regarded as constraints in filament and nonwoven processing so far. However, these two properties have now been used to elaborate a three-dimensional fiber arrangement on a matrix, resulting in the creation of dimensionally and temperature-stable “nonwoven-parts”. Moreover, this study investigated the PHA copolymer poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH), revealing a similar processability to P3HB and PHBV in the meltblow process. A significant increase in the (peak load) elongation in the machine direction was observed, reaching values between 5% and 10%, while the tensile strength retained unaltered. The addition of the bio-based plasticizer acetyltributylcitrate (ATBC) to PHBH resulted on an increase in elongation up to 15%. The three-dimensional fabric structure of PHBH exhibited complete resilience to compression, a property that differentiates it from both P3HB and PHBV. However, the addition of the plasticizer to P3HB did not lead to any improvements. This interesting array of properties results in moderate air permeability and hydrophobicity, leading to impermeability to water.