Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen:
http://dx.doi.org/10.18419/opus-12909
Autor(en): | Helfesrieder, Nico Neubauer, Michael Lechler, Armin Verl, Alexander |
Titel: | Hybrid manufacturing of topology optimized machine tool parts through a layer laminated manufacturing method : practical validation using the example of a bearing block |
Erscheinungsdatum: | 2021 |
Dokumentart: | Zeitschriftenartikel |
Seiten: | 493-502 |
Erschienen in: | Production engineering 16 (2022), S. 493-502 |
URI: | http://nbn-resolving.de/urn:nbn:de:bsz:93-opus-ds-129286 http://elib.uni-stuttgart.de/handle/11682/12928 http://dx.doi.org/10.18419/opus-12909 |
ISSN: | 0944-6524 1863-7353 |
Zusammenfassung: | Load-oriented lightweight structures are commonly designed based on topology optimization. For machine tool parts, they enable the reduction of moving masses and therefore increase the resource and energy efficiency of production systems. However, this usually results in complex part structures that are difficult or impossible to produce using conventional manufacturing methods. In this paper, a hybrid layer laminated manufacturing (LLM) method is proposed enabling manufacturing of topology-optimized machine tool parts. The method is referred to as hybrid, as the subtractive structuring of metal sheets is combined with the additive joining of the sheets by adhesive bonding. This enables enclosed inner cavities without support structures, which are used to approximate the optimal density distribution from a topology optimization via manufacturing. The proposed LLM method is validated on the basis of a bearing block of a ball screw feed drive. A experimental study in the time and frequency domain on a test rig confirms the principle suitability of the LLM method for the production of industrial applicable lightweight components. |
Enthalten in den Sammlungen: | 07 Fakultät Konstruktions-, Produktions- und Fahrzeugtechnik |
Dateien zu dieser Ressource:
Datei | Beschreibung | Größe | Format | |
---|---|---|---|---|
s11740-021-01095-7.pdf | 1,67 MB | Adobe PDF | Öffnen/Anzeigen |
Diese Ressource wurde unter folgender Copyright-Bestimmung veröffentlicht: Lizenz von Creative Commons