Browsing by Author "Buchmeiser, Michael R."

Now showing 1 - 20 of 37

Open Access
Asymmetric Rh diene catalysis under confinement : isoxazole ring‐contraction in mesoporous solids
(2024) Marshall, Max; Dilruba, Zarfishan; Beurer, Ann‐Katrin; Bieck, Kira; Emmerling, Sebastian; Markus, Felix; Vogler, Charlotte; Ziegler, Felix; Fuhrer, Marina; Liu, Sherri S. Y.; Kousik, Shravan R.; Frey, Wolfgang; Traa, Yvonne; Bruckner, Johanna R.; Plietker, Bernd; Buchmeiser, Michael R.; Ludwigs, Sabine; Naumann, Stefan; Atanasova, Petia; Lotsch, Bettina V.; Zens, Anna; Laschat, Sabine
Covalent immobilization of chiral dienes in mesoporous solids for asymmetric heterogeneous catalysis is highly attractive. In order to study confinement effects in bimolecular vs monomolecular reactions, a series of pseudo‐C2‐symmetrical tetrahydropentalenes was synthesized and immobilized via click reaction on different mesoporous solids (silica, carbon, covalent organic frameworks) and compared with homogeneous conditions. Two types of Rh‐catalyzed reactions were studied: (a) bimolecular nucleophilic 1,2‐additions of phenylboroxine to N‐tosylimine and (b) monomolecular isomerization of isoxazole to 2H‐azirne. Polar support materials performed better than non‐polar ones. Under confinement, bimolecular reactions showed decreased yields, whereas yields in monomolecular reactions were only little affected. Regarding enantioselectivity the opposite trend was observed, i. e. effective enantiocontrol for bimolecular reactions but only little control for monomolecular reactions was found.
Open Access
Cationic group VI metal imido alkylidene N‐heterocyclic carbene nitrile complexes : bench‐stable, functional‐group‐tolerant olefin metathesis catalysts
(2020) Benedikter, Mathis J.; Musso, Janis V.; Frey, Wolfgang; Schowner, Roman; Buchmeiser, Michael R.
Despite their excellent selectivities and activities, Mo‐and W‐based catalysts for olefin metathesis have not gained the same widespread use as Ru‐based systems, mainly due to their inherent air sensitivity. Herein, we describe the synthesis of air‐stable cationic‐at‐metal molybdenum and tungsten imido alkylidene NHC nitrile complexes. They catalyze olefin metathesis reactions of substrates containing functional groups such as (thio‐) esters, (thio‐) ethers and alcohols without the need for prior activation, for example, by a Lewis acid. The presence of a nitrile ligand was found to be essential for their stability towards air, while no decrease in activity and productivity could be observed upon coordination of a nitrile. Variations of the imido and anionic ligand revealed that alkoxide complexes with electron‐withdrawing imido ligands offer the highest reactivities and excellent stability compared to analogous triflate and halide complexes.
Open Access
Cationic molybdenum imido alkylidene N‐heterocyclic carbene complexes confined in mesoporous silica : tuning transition states towards Z‐selective ring‐opening cross‐metathesis
(2022) Goldstein, Elizabeth L.; Ziegler, Felix; Beurer, Ann‐Katrin; Traa, Yvonne; Bruckner, Johanna R.; Buchmeiser, Michael R.
We recently reported a method for selective macro(mono)cyclization of dienes utilizing catalysts confined inside the pores of mesoporous silica, which we believe occurs due to suppression of oligomerization due to pore size. We hypothesized, however, that the system of cationic molybdenum imido alkylidene N‐heterocyclic carbene (NHC) catalysts immobilized selectively inside the mesopores of silica materials could address much more subtle selectivity differences, such as E/Z selectivity in ring‐opening/cross‐metathesis (ROCM). Upon investigation, we observed that surface‐bound cationic molybdenum imido alkylidene NHC catalysts indeed display an increased Z‐selectivity, especially during the early stages of the reaction. This effect was present when the catalyst was confined inside a pore, as well as when the catalyst was bound to non‐porous silica, which led us to conclude it is an effect caused by the catalyst being bound directly to the surface of a silica material where the proximity of the catalyst to the surface governs the transition state. Kinetic investigations revealed that significant post‐metathesis olefin isomerization occurs, the amount of which seems to be governed by the rate of diffusion of the product away from the active catalyst, with smaller pore sizes resulting in higher Z‐selectivity at higher conversion, attributable to faster diffusion of the product out of the pore than diffusion back into the pore.
Open Access
Cationic tungsten alkylidyne N‐heterocyclic carbene complexes : synthesis and reactivity in alkyne metathesis
(2020) Hauser, Philipp M.; Ende, Melita van der; Groos, Jonas; Frey, Wolfgang; Wang, Dongren; Buchmeiser, Michael R.
The first cationic and neutral tungsten alkylidyne N‐heterocyclic carbene (NHC) complexes bearing one triflate ligand were synthesized and tested for their reactivity in alkyne metathesis. Both types of tungsten alkylidyne complexes display a higher productivity in alkyne metathesis than the analogous neutral tungsten alkylidyne NHC trisalkoxide complexes. Reaction of W(≡CC6H4OMe)(1,3‐bis(1‐hydroxy‐1,1‐trifluoromethylethyl)‐imidazol‐2‐ylidene)Cl (W18) with AgB(ArF)4 (ArF = 3,5‐bis(trifluoromethyl)phenyl) resulted in the unexpected formation of, to the best of our knowledge, the first cationic ditungstatetrahedrane W2(1,3‐bis(1‐hydroxy‐1,1‐trifluoromethyl‐ethyl)‐imidazol‐2‐ylidene)2(MeCN)(µ‐((Ar)CC(Ar)))+ (B(ArF)4)- (W19, Ar = C6H4OMe), which suggests bimolecular decomposition as a possible decomposition pathway of cationic tungsten alkylidyne NHC complexes. Reaction of the cationic tungsten alkylidyne NHC complex W(≡CC6H4OMe)(1,3‐diisopropylimidazol‐2‐ylidene)(OC(CF3)2Me)2(NCtBu)+ (B(ArF)4)- (W7) with 1‐phenyl‐1‐propyne allowed for the isolation of a cationic tungstacyclobutadiene W(C3(Ph)(Me)(C6H4OMe))(1,3‐diisopropylimidazol‐2‐ylidene)(OC(CF3)2Me)2(NCtBu)+ (B(ArF)4)- (W20). Its formation strongly supports a cationic active species in the alkyne metathesis with tungsten alkylidyne NHC complexes.
Open Access
Chitin/cellulose blend fibers prepared by wet and dry‐wet spinning
(2020) Ota, Antje; Beyer, Ronald; Hageroth, Ulrich; Müller, Alexandra; Tomasic, Patricija; Hermanutz, Frank; Buchmeiser, Michael R.
We describe the wet and dry‐wet spinning of multifilament cellulosic composite fibers, namely chitin/cellulose fibers. The direct solution process for the two biopolymers based on an ionic liquid as solvent represents an environmentally friendly and alternative technology to the industrially applied viscose and lyocell process. Both cellulose and chitin possess good solubility in 1‐ethyl‐3‐methylimidazolium propionate ([C2C1Im][OPr]) and were spun into multifilament composite fibers. Moreover, for the first time, pure chitin multifilament fibers were obtained by dry‐wet spinning. The effect of chitin addition on the filament properties was investigated and evaluated by microscopic, spectroscopic, and mechanical analyses.
Open Access
Chromium(VI) bisimido dichloro, bisimido alkylidene, and chromium(V) bisimido iodo N‐heterocyclic carbene complexes
(2020) Panyam, Pradeep K. R.; Stöhr, Laura; Wang, Dongren; Frey, Wolfgang; Buchmeiser, Michael R.
Reaction of CrCl2(N-tBu)2 with 1,3-dimethylimidazol-2-ylidene (IMe), 1,3-dimethyl-4,5-dichloroimidazol-2-ylidene (IMeCl2), 1,3-di(2-propyl)imidazol-2-ylidene (IPr), 1,3-dimesitylimidazol-2-ylidene (IMes) and 1,3-bis(2,6-(2-Pr)2C6H3)imidazol-2-ylidene (IDipp) yields the corresponding N-heterocyclic carbene (NHC) adducts CrCl2(IMe)(N-tBu)2 (1), CrCl2(IMeCl2)(N-tBu)2 (2), CrCl2(IPr)(N-tBu)2 (3), CrCl2(IMes)(N-tBu)2 (4) and CrCl2(IDipp)(N-tBu)2 (5). Likewise, reaction of CrCl2(N-2,6-(2-Pr)2C6H3)2 and CrCl2(N-adamantyl)2 with IMes yields CrCl2(N-2,6-(2-Pr)2C6H3)2(IMes) (6) and CrCl2(N-adamantyl)2(IMes) (7), respectively. Reaction of CrCl2(N-tBu)2 with the bidentate NHCs 1-R-3-(1-(2-LiO-C6H4))imidazol-2-ylidene yields the corresponding pentacoordinated Cr(VI) complexes CrCl2(1-R-3-(1-(2-O-C6H4))imidazol-2-ylidene)2C6H3)2(IMes) (R = 2,4,6-(CH3)3C6H2, 8), (R = tBu, 9), (R = 2-phenyl-C6H4, 10). Reaction of the chromium(VI) complex Cr(N-2,6-(2-Pr)2-C6H3)2(CH2C(CH3)3)2 with 1,3-dimethylimidazol-2-ylidene·AgI yields the bimetallic silver adduct of the chromium alkylidene complex (11) along with the tetrahedral chromium(V) complex CrI(N-2,6-(2-Pr)2-C6H3)2(1,3-dimethylimidazol-2-ylidene) (12). Compounds 1-4, 7, 9-12 were characterized by single-crystal X-ray analysis. Finally, the chromium(VI) bisimido-amido complexes 13-14 bearing the N-6-(2-(diethylboryl)phenyl)pyridyl-2-yl-motif are reported.
Open Access
Differences in electrochemistry between fibrous SPAN and fibrous S/C cathodes relevant to cycle stability and capacity
(2017) Warneke, Sven; Eusterholz, Michael; Zenn, Roland K.; Hintennach, Andreas; Dinnebier, Robert E.; Buchmeiser, Michael R.
Two different Li/S cathodes are compared in terms of capacity (mA.h.gsulfur-1) and intermediates during discharge and charge. One cathode material is based on fibrous SPAN, a sulfur-containing material obtained via the thermal conversion of poly(acrylonitrile), PAN, in the presence of sulfur. In this material, sulfur is covalently bound to the polymeric backbone. The second cathode material is based on porous activated carbon fibers (ACFs) with elemental sulfur embedded inside the ACFs’ micropores. Cyclic voltammetry clearly indicates different discharge and charge chemistry of the two materials. While S-containing ACFs show the expected redox-chemistry of sulfur, SPAN does not form long-chain polysulfides during discharge; instead, sulfide is chopped off the polymer-bound sulfur chains to directly form Li2S. The high reversibility of this process accounts for both the high cycle stability and capacity of SPAN-based cathode materials.
Open Access
Dual catalysis with an N‐heterocyclic carbene and a Lewis acid : thermally latent precatalyst for the polymerization of ε‐caprolactam
(2020) Altmann, Hagen J.; Steinmann, Mark; Elser, Iris; Benedikter, Mathis J.; Naumann, Stefan; Buchmeiser, Michael R.
So far, the earlier reported strong correlation between basicity of an N‐heterocyclic carbene (NHC) and its reactivity in poly(ε‐caprolactam) (PA6) synthesis resulted in a substantial limitation of applicable carbenes. Here, to overcome this issue, 1,3‐dimethylimidazolium‐2‐carboxylate, an easily accessible, air and moisture‐stable NHC, was applied as thermally latent initiator. In order to compensate for its low basicity, reactivity was enhanced by the addition of both a Lewis acid and an activator to ease the initial polymerization step. The resulting mixtures of ε‐caprolactam, the CO2‐protected NHC, a Lewis acid and N‐acylazepan‐2‐one constitute homogeneous, thermally fully latent “single‐component” blends for the anionic polymerization‐based synthesis of PA6. They can be stored both in the liquid and solid state for days and months, respectively, without any loss in activity. The role of the Lewis acid as well as technical implications of the prolonged pot‐times are discussed.
Open Access
High‐performance carbon fibers prepared by continuous stabilization and carbonization of electron beam‐irradiated textile grade polyacrylonitrile fibers
(2021) König, Simon; Bauch, Volker; Herbert, Christian; Wego, Andreas; Steinmann, Mark; Frank, Erik; Buchmeiser, Michael R.
The manufacturing of high‐performance carbon fibers (CFs) from low‐cost textile grade poly(acrylonitrile) (PAN) homo‐ and copolymers using continuous electron beam (EB) irradiation, stabilization, and carbonization on a kilogram scale is reported. The resulting CFs have tensile strengths of up to 3.1 ± 0.6 GPa and Young's moduli of up to 212 ± 9 GPa, exceeding standard grade CFs such as Toray T300. Additionally, the Weibull strength and modulus, the microstructure, and the morphology of these CFs are determined.
Open Access
High-performance cellulosic filament fibers prepared via dry-jet wet spinning from ionic liquids
(2021) Vocht, Marc P.; Beyer, Ronald; Thomasic, Patricija; Müller, Alexandra; Ota, Antje; Hermanutz, Frank; Buchmeiser, Michael R.
We report on a new process for the spinning of high-performance cellulosic fibers. For the first time, cellulose has been dissolved in the ionic liquid (IL) 1-ethyl-3-methylimidazolium octanoate ([C2C1im][Oc]) via a thin film evaporator in a continuous process. Compared to other ILs, [C2C1im][Oc] shows no signs of hydrolysis with water. For dope preparation the degree of polymerization of the pulp was adjusted by electron beam irradiation and determined by viscosimetry. In addition, the quality of the pulp was evaluated by means of alkali resistance. Endless filament fibers have been spun using dry-jet wet spinning and an extruder instead of a spinning pump, which significantly increases productivity. By this approach, more than 1000 m of continuous multifilament fibers have been spun. The novel approach allows for preparing cellulose fibers with high Young's modulus (33 GPa) and unprecedented high tensile strengths up to 45 cN/tex. The high performance of the obtained fibers provides a promising outlook for their application as replacement material for rayon-based tire cord fibers.
Open Access
High‐performance magnesium‐sulfur batteries based on a sulfurated poly(acrylonitrile) cathode, a borohydride electrolyte, and a high‐surface area magnesium anode
(2020) Wang, Peiwen; Trück, Janina; Niesen, Stefan; Kappler, Julian; Küster, Kathrin; Starke, Ulrich; Ziegler, Felix; Hintennach, Andreas; Buchmeiser, Michael R.
Post‐lithium‐ion battery technology is considered a key element of future energy storage and management. Apart from high gravimetric and volumetric energy densities, economic, ecologic and safety issues become increasingly important. In that regards, both the anode and cathode materials must be easily available, recyclable, non‐toxic and safe, which renders magnesium‐sulfur (Mg-S) batteries a promising choice. Herein, we present Mg-S cells based on a sulfurated poly(acrylonitrile) composite cathode (SPAN), together with a halogen‐free electrolyte containing both Mg[BH4]2 and Li[BH4] in diglyme and a high‐specific surface area magnesium anode based on Rieke magnesium powder. These cells deliver discharge capacities of 1400 and 800 mAh/gsulfur with >99 % Coulombic efficiency at 0.1 C and 0.5 C, respectively, and are stable over at least 300 cycles. Energy densities are 470 and 400 Wh/kgsulfur at 0.1 C and 0.5 C, respectively. Rate tests carried out between 0.1 C and 2 C demonstrate good rate capability of the cells. Detailed mechanistic studies based on X‐ray photoelectron spectroscopy and electric impedance spectroscopy are presented.
Open Access
Hydrosilylation of alkynes under continuous flow using polyurethane‐based monolithic supports with tailored mesoporosity
(2022) Acikalin, Hande; Panyam, Pradeep K. R.; Shaikh, Abdul Wasif; Wang, Dongren; Kousik, Shravan R.; Atanasova, Petia; Buchmeiser, Michael R.
Non‐porous polyurethane‐based monoliths are prepared under solvent‐induced phase separation conditions. They possess low specific surface areas of 0.15 m2 g-1, pore volumes of 1 µL g-1, and a non‐permanent, solvent‐induced microporosity with pore dimensions ≤1 nm. Mesoporosity can be introduced by varying the monomers and solvents. A tuning of the average solubility parameter of the solvent mixture by increasing the macroporogen content results in a decrease in the volume fraction of micropores from 70% to 40% and an increase in the volume fraction of pores in the range of 1.7-9.6 nm from 22% to 41% with only minor changes in the volume fraction of larger mesopores in the range of 9.6–50 nm. The polymeric monoliths are functionalized with quaternary ammonium groups, which allowed for the immobilization of an ionic liquid that contained the ionic Rh‐catalyst [1‐(pyrid‐2‐yl)‐3‐mesityl)‐imidazol‐2‐ylidene))(η4‐1,5‐cyclooctadiene)Rh(I) tetrafluoroborate]. The supported catalyst is used in the hydrosilylation of 1‐alkynes with dimethylphenylsilane under continuous flow using methyl‐tert‐butyl ether as second liquid transport phase. E/Z‐selectivity in hydrosilylation is compared to the one of the analogous biphasic reactions. The strong increase in Z‐selectivity is attributed to a confinement effect provided by the small mesopores.
Open Access
Lignin/poly(vinylpyrrolidone) multifilament fibers dry‐spun from water as carbon fiber precursors
(2023) Kreis, Philipp; Frank, Erik; Clauß, Bernd; Bauch, Volker; Stolpmann, Heiko; Kuske, Lisa; Schneck, Tanja; König, Simon; Buchmeiser, Michael R.
The preparation of lignin-based carbon fibers by dry spinning from aqueous solution followed by stabilization and continuous carbonization to endless yarns is reported. The influence of carbonization temperature and draw ratio on the morphology and mechanical properties of the final carbon fibers is investigated by single-fiber testing, wide-angle X-ray scattering, scanning electron microscopy, and Raman spectroscopy. A draw ratio of 5% (1.05) with a carbonization temperature of 1400 °C leads to the best mechanical properties. The resulting multifilament carbon fibers have an average diameter between 10-12 µm, an average tensile strength of 1.30 ± 0.32 GPa, a Young's modulus of 101 ± 18 GPa, and an elongation at break of 1.31 ± 0.23%. The maximum Weibull strength (𝜎0) is 1.04 GPa with a Weibull modulus (m) of 5.1. The use of a water-soluble system is economically advantageous; also, unlike melt-spun lignin fibers, the dry-spun precursor fibers can be thermally converted without any additional crosslinking step.
Open Access
Macrocyclization of dienes under confinement with cationic tungsten imido/oxo alkylidene N‐heterocyclic carbene complexes
(2023) Ziegler, Felix; Bruckner, Johanna R.; Nowakowski, Michal; Bauer, Matthias; Probst, Patrick; Atwi, Boshra; Buchmeiser, Michael R.
Macrocyclization reactions are still challenging due to competing oligomerization, which requires the use of small substrate concentrations. Here, the cationic tungsten imido and tungsten oxo alkylidene N-heterocyclic carbene complexes [[W(N-2,6-Cl2-C6H3)(CHCMe2Ph(OC6F5)(pivalonitrile)(IMes)+ B(ArF)4-] (W1) and [W(O (CHCMe2Ph(OCMe(CF3)2)(IMes)(CH3CN)+ B(ArF)4-] (W2) (IMes=1,3-dimesitylimidazol-2-ylidene; B(ArF)4-=tetrakis(3,5-bis(trifluoromethyl)phenyl borate) have been immobilized inside the pores of ordered mesoporous silica (OMS) with pore diameters of 3.3 and 6.8 nm, respectively, using a pore-selective immobilization protocol. X-ray absorption spectroscopy of W1@OMS showed that even though the catalyst structure is contracted due to confinement by the mesopores, both the oxidation state and structure of the catalyst stayed intact upon immobilization. Catalytic testing with four differently sized α,ω-dienes revealed a dramatically increased macrocyclization (MC) and Z-selectivity of the supported catalysts compared to the homogenous progenitors, allowing high substrate concentrations of 25 mM. With the supported complexes, a maximum increase in MC-selectivity from 27 to 81 % and in Z-selectivity from 17 to 34 % was achieved. In general, smaller mesopores exhibited a stronger confinement effect. A comparison of the two supported tungsten-based catalysts showed that W1@OMS possesses a higher MC-selectivity, while W2@OMS exhibits a higher Z-selectivity which can be rationalized by the structures of the catalysts.
Open Access
Melt spinning of propylene carbonate‐plasticized poly(acrylonitrile)‐co‐poly(methyl acrylate)
(2020) König, Simon; Kreis, Philipp; Reinders, Leonie; Beyer, Ronald; Wego, Andreas; Herbert, Christian; Steinmann, Mark; Frank, Erik; Buchmeiser, Michael R.
The primary use of poly(acrylonitrile) (PAN) fibers, commonly referred to as acrylic fibers, is in textile applications like clothing, furniture, carpets, and awnings. All commercially available PAN fibers are processed by solution spinning; however, alternative, more cost‐effective processes like melt spinning are still highly desired. Here, the melt spinning of PAN‐co‐poly(methyl acrylate) (PMA) plasticized with propylene carbonate (PC) at 175°C is reported. The use of methyl acrylate (MA) as comonomer and PC as an external plasticizer renders the approach a combination of internal and external plasticization. Various mixtures of PAN and PC used in this work were examined by rheology, subjected to melt spinning, followed by discontinuous and continuous washing, respectively. The best fibers were derived from a PAN‐co‐PMA copolymer containing 8.1 mol‐% of MA having a number‐average molecular weight Mn of 34 000 g/mol, spun in the presence of 22.5 wt.‐% of PC. The resulting fibers were analyzed by scanning electron microscopy and wide‐angle X‐ray scattering (WAXS), and were subjected to mechanical testing.
Open Access
Melt-spinning of an intrinsically flame-retardant polyacrylonitrile copolymer
(2020) König, Simon; Kreis, Philipp; Herbert, Christian; Wego, Andreas; Steinmann, Mark; Wang, Dongren; Frank, Erik; Buchmeiser, Michael R.
Poly(acrylonitrile) (PAN) fibers have two essential drawbacks: they are usually processed by solution-spinning, which is inferior to melt spinning in terms of productivity and costs, and they are flammable in air. Here, we report on the synthesis and melt-spinning of an intrinsically flame-retardant PAN-copolymer with phosphorus-containing dimethylphosphonomethyl acrylate (DPA) as primary comonomer. Furthermore, the copolymerization parameters of the aqueous suspension polymerization of acrylonitrile (AN) and DPA were determined applying both the Fineman and Ross and Kelen and Tüdõs methods. For flame retardancy and melt-spinning tests, multiple PAN copolymers with different amounts of DPA and, in some cases, methyl acrylate (MA) have been synthesized. One of the synthesized PAN-copolymers has been melt-spun with propylene carbonate (PC) as plasticizer; the resulting PAN-fibers had a tenacity of 195 ± 40 MPa and a Young’s modulus of 5.2 ± 0.7 GPa. The flame-retardant properties have been determined by Limiting Oxygen Index (LOI) flame tests. The LOI value of the melt-spinnable PAN was 25.1; it therefore meets the flame retardancy criteria for many applications. In short, the reported method shows that the disadvantage of high comonomer content necessary for flame retardation can be turned into an advantage by enabling melt spinning.
Open Access
Method of manufacturing structural, optically transparent glass fiber-reinforced polymers (tGFRP) using infusion techniques with epoxy resin systems and E-glass fabrics
(2023) Heudorfer, Klaus; Bauer, Johannes; Caydamli, Yavuz; Gompf, Bruno; Take, Jens; Buchmeiser, Michael R.; Middendorf, Peter
Recently, fiber-reinforced, epoxy-based, optically transparent composites were successfully produced using resin transfer molding (RTM) techniques. Generally, the production of structural, optically transparent composites is challenging since it requires the combination of a very smooth mold surface with a sufficient control of resin flow that leads to no visible voids. Furthermore, it requires a minimum deviation of the refractive indices (RIs) of the matrix polymer and the reinforcement fibers. Here, a new mold design is described and three plates of optically transparent glass fiber-reinforced polymers (tGFRP) with reproducible properties as well as high fiber volume fractions were produced using the RTM process and in situ polymerization of an epoxy resin system enclosing E-glass fiber textiles. Their mechanical (flexural), microstructural (fiber volume fraction, surface roughness, etc.), thermal (DSC, TGA, etc.), and optical (dispersion curves of glass fibers and polymer as well as transmission over visible spectra curves of the tGFRP at varying tempering states) properties were evaluated. The research showed improved surface quality and good transmission data for samples manufactured by a new Optical-RTM setup compared to a standard RTM mold. The maximum transmission was reported to be ≈74%. In addition, no detectable voids were found in these samples. Furthermore, a flexural modulus of 23.49 ± 0.64 GPa was achieved for the Optical-RTM samples having a fiber volume fraction of ≈42%.
Open Access
Molybdenum alkylidyne silyloxy N‐heterocyclic carbene complexes : highly active alkyne metathesis catalysts that can be handled in air
(2022) Musso, Janis V.; Gramm, Vincent; Stein, Sarjano; Frey, Wolfgang; Buchmeiser, Michael R.
A series of molybdenum alkylidyne silyloxy N‐heterocyclic carbene (NHC) complexes of the general formula [Mo(≡C(R))(OSiPh3)3(NHC)] (R=tBu, 4‐methoxyphenyl, 2,4,6‐trimethylphenyl; NHC = 1,3‐diisopropylimidazol‐2‐ylidene, 1,3‐dicyclohexylimidazol‐2‐ylidene, 1,3‐dicyclohexyl‐4,5‐dihydroimidazol‐2‐ylidene, 1,3‐dimethylimidazol‐2‐ylidene, 1,3‐dimethyl‐4,5‐dichloroimidazol‐2‐ylidene) was synthesized. Single crystal X‐ray analyses revealed that with increasing steric demand of the alkylidyne group, enhanced air‐stability of the complexes in the solid‐state is achieved with the most stable complex (R=2,4,6‐trimethylphenyl, NHC = 1,3‐diisopropylimidazol‐2‐ylidene) being stable in air for 24 h without showing signs of decomposition in 1H NMR. In contrast to previously reported air‐stable molybdenum‐based complexes, the novel catalysts proved to be highly active in alkyne metathesis, allowing for turnover numbers (TONs) of up to 6000 without further activation, and tolerant towards several functional groups such as tosyl, ether, ester, thioether and nitro moieties. Their air stability allows for facile handling of the catalysts in air and even after exposure to ambient atmosphere for one week, the most stable representative still displayed high productivity in alkyne metathesis.
Open Access
Neutral and cationic molybdenum imido alkylidene cyclic alkyl amino carbene (CAAC) complexes for olefin metathesis
(2023) Kundu, Koushani; Musso, Janis V.; Benedikter, Mathis J.; Frey, Wolfgang; Gugeler, Katrin; Kästner, Johannes; Buchmeiser, Michael R.
The first neutral and cationic Mo imido alkylidene cyclic alkyl amino carbene (CAAC) complexes of the general formulae [Mo(N-Ar)(CHCMe2Ph)(X)2(CAAC)] and [Mo(N−Ar)(CHCMe2Ph)(X)(CAAC)][B(ArF)4] (X=Br, Cl, OTf, OC6F5; CAAC=1-(2,6-iPr2-C6H3)-3,3,5,5-tetramethyltetrahydropyrrol-2-ylidene) have been synthesized from molybdenum imido bishalide alkylidene DME precursors. Different combinations of the imido and “X” ligands have been employed to understand synthetic peculiarities. Selected complexes have been characterized by single-crystal X-ray analysis. Due to the pronounced σ-donor/π-acceptor characteristics of CAACs, the corresponding neutral and cationic molybdenum imido alkylidene CAAC complexes do not require the presence of stabilizing donor ligands such as nitriles. Calculations on the PBE0-D3BJ/def2-TZVP level for PBE0-D3BJ/def2-SVP optimized geometries revealed partial charges at molybdenum similar to the corresponding molybdenum imido alkylidene N-heterocyclic carbene (NHC) complexes with a slightly higher polarization of the molybdenum alkylidene bond in the CAAC complexes. All cationic complexes have been tested in olefin metathesis reactions and showed improved activity compared to the analogous NHC complexes for hydrocarbon-based substrates, allowing for turnover numbers (TONs) up to 9500 even at room temperature. Some Mo imido alkylidene CAAC complexes are tolerant towards functional groups like thioethers and sulfonamides.
Open Access
Olefin metathesis under spatial confinement and continuous flow : investigation of isomeric side reactions with a Grubbs-Hoveyda type catalyst
(2023) Böth, André; Roider, Thomas; Ziegler, Felix; Xie, Xiulan; Buchmeiser, Michael R.; Tallarek, Ulrich
A 2nd‐generation Grubbs-Hoveyda type catalyst was immobilized inside mesoporous silica and used in the ring‐closing metathesis (RCM) of an α,ω‐diene to a large macro(mono)cycle. The goal was to investigate the relationship between substrate concentration, reaction time, and overall experiment time on the rate of isomerization under spatial (mesopore space) confinement with continuous‐flow microreactors. RCM reactions are commonly monitored by 1H NMR analysis, however, elucidation of reaction mixtures yielding large rings with a difference of only a single carbon atom remains difficult, because NMR signals are sometimes indistinguishable. In this work, an analytical platform with on‐line separation and detection of UV‐active substrate as well as (side) products by high‐performance liquid chromatography and a UV/Vis‐diode array detector (DAD) plus mass spectrometry served as enabling technology to quantify yield and selectivity under the respective reaction conditions. Using this setup, competitive reaction equilibria and isomerization reactions, in particular, could be resolved. Identification and quantification of relevant compounds of the reaction scheme under spatial confinement became possible despite chemical similarity. Kinetic data revealed that isomerization increases with higher substrate concentrations (up to 250 mM) and longer reaction times (from 1.2 to 18.6 min), but shows a distinct decline for prolonged overall experiment times (up to ∼250 min).