Browsing by Author "Marino, Michael G."

Now showing 1 - 1 of 1

Open Access
Anion exchange membranes for fuel cells and flow batteries : transport and stability of model systems
(2015) Marino, Michael G.; Maier, Joachim (Prof. Dr.)
Polymeric anion exchange materials in membrane form can be key components in emerging energy storage and conversions systems such as the alkaline fuel cell and the RedOx flow battery. For these applications the membrane properties need to include good ionic conductivity and sufficient chemical stability, two aspects, that are not sufficiently understood in terms of materials science. Materials fulfilling both criteria are currently not available. The transport of ions and water in a model anion exchange membrane (AEM) as well as the alkaline stability of their quaternary ammonium functional groups is therefore investigated in this thesis from a basic point of view but with the aim to bring these technologies one step closer to large scale application, as they have several advantages compared to existing energy storage and conversion systems. The hydroxide exchanging alkaline fuel cell (AFC), for example, is in principle more cost-effective than the more common acidic proton exchange fuel cell (PEMFC). Unfortunately AFCs suffer from base induced decomposition of the membrane. Especially the quaternary ammonium (QA) functional groups are easily attacked by the nucleophilic hydroxide. QAs with higher alkaline stability are required but there is considerable disagreement regarding which QAs are suitable, with widely varying and partially contradicting results reported in the literature. In this thesis, the decay of QA salts was investigated under controlled accelerated aging conditions (up to 10 M NaOH and 160 °C). This allowed a stability comparison based solely on the molecular structure of the QAs. A number of different approaches to stabilize the QAs which potentially inhibit degradation reactions such as β-elimination, substitution and rearrangements were compared. These include β-proton removal, charge delocalization, spacer-chains, electron-inducing groups and conformational confinement. Heterocylic 6-membered QAs based on the piperidine structure proved to be by far the most stable cations at the chosen conditions. This was not readily apparent from their structure since they contain β-protons in anti-periplanar positions, which generally cause rapid decomposition in other types of QAs. The geometry of the cyclic structure probably exerts strain on the reaction transition states, kinetically inhibiting the degradation reactions. Other stabilization approaches resulted in markedly less stable compounds. Noticeably the benzylic group, which is the current standard covalent tether between QA and polymer, degrades very fast compared to almost all aliphatic QAs. The results of this stability study suggest that hydroxide exchange membranes for alkaline fuel cells, which are significantly more stable than current materials are achievable. Besides stability, the transport of anions and water in AEMs was investigated in this Hydroxide exchange membranes (HEM) have been reported to exhibit surprisingly low ionic conductivities compared to their proton exchange membrane (PEM) counterparts. This is partially because hydroxide charge carriers are rapidly converted to carbonates when a HEM comes into contact with ambient air. Careful exclusion of CO2 was required to investigate pure hydroxide form membranes. For this purpose a custom glove box was designed and built that allowed preparation and measurements of HEM samples in a humidified CO 2 -free atmosphere. It was found that the conductivity reduction of a carbonate contaminated HEM is not only due to the reduced ionic mobility of carbonate charge carriers compared to hydroxide, but also because of reduced water absorption of the corresponding membrane which decreases conductivity even further. Pure HEMs can in fact achieve conductivities within a factor of two of PEMs at equal ion exchange capacity at sufficient hydration, according to the differences in the ionic mobility of hydroxide and hydronium. At lower water contents though, the hydroxide mobility decreases faster than that of hydronium in comparable PEMs due to reduced dissociation and percolation as well as a break-down of structural diffusion Apart from the HEM, membranes in other ionic forms were investigated. Generally, all investigated AEM properties were found to change if the type of anion was exchanged. This comprises the degree of dissociation, conductivity, membrane morphology and sometimes even water diffusion. Remarkably, at low water contents, the ionic conductivity of the HEM sank below that of the halides, despite the much higher hydroxide mobility in aqueous solution. A gradual break-down of the hydroxide structural diffusion is probably responsible. Another noticeable observation was that the degree of dissociation for at least the bromide and chloride form membranes remains almost constant over a considerable water content range, suggesting the formation of associates consisting of several ions, which probably also exists in other ionic forms.