Browsing by Author "Renner, Jörg"

Filter results by typing the first few letters
Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    Diagnosing hydro-mechanical effects in subsurface fluid flow through fractures
    (2023) Schmidt, Patrick; Steeb, Holger; Renner, Jörg
    Hydro-mechanically induced transient changes in fracture volume elude an analysis of pressure and flow rate transients by conventional diffusion-based models. We used a previously developed fully coupled, inherently non-linear numerical simulation model to demonstrate that harmonic hydraulic excitation of fractures leads to systematic overtones in the response spectrum that can thus be used as a diagnostic criterion for hydro-mechanical interaction. The examination of response spectra, obtained from harmonic testing at four different field sites, for the occurrence of overtones confirmed their potential for the hydro-mechanical characterization of tested reservoirs. A non-dimensional analysis identified relative aperture change as the critical system parameter.
  • Thumbnail Image
    ItemOpen Access
    Investigations into the opening of fractures during hydraulic testing using a hybrid-dimensional flow formulation
    (2021) Schmidt, Patrick; Steeb, Holger; Renner, Jörg
    We applied a hybrid-dimensional flow model to pressure transients recorded during pumping experiments conducted at the Reiche Zeche underground research laboratory to study the opening behavior of fractures due to fluid injection. Two distinct types of pressure responses to flow-rate steps were identified that represent radial-symmetric and plane-axisymmetric flow regimes from a conventional pressure-diffusion perspective. We numerically modeled both using a radial-symmetric flow formulation for a fracture that comprises a non-linear constitutive relation for the contact mechanics governing reversible fracture surface interaction. The two types of pressure response can be modeled equally well. A sensitivity study revealed a positive correlation between fracture length and normal fracture stiffness that yield a match between field observations and numerical results. Decomposition of the acting normal stresses into stresses associated with the deformation state of the global fracture geometry and with the local contacts indicates that geometrically induced stresses contribute the more the lower the total effective normal stress and the shorter the fracture. Separating the contributions of the local contact mechanics and the overall fracture geometry to fracture normal stiffness indicates that the geometrical stiffness constitutes a lower bound for total stiffness; its relevance increases with decreasing fracture length. Our study demonstrates that non-linear hydro-mechanical coupling can lead to vastly different hydraulic responses and thus provides an alternative to conventional pressure-diffusion analysis that requires changes in flow regime to cover the full range of observations.