Browsing by Author "Wolf, Jan"

Now showing 1 - 2 of 2

Open Access
A data-driven approach for cutting force prediction in FEM machining simulations using gradient boosted machines
(2024) Reeber, Tim; Wolf, Jan; Möhring, Hans-Christian
Cutting simulations via the Finite Element Method (FEM) have recently gained more significance due to ever increasing computational performance and thus better resulting accuracy. However, these simulations are still time consuming and therefore cannot be deployed for an in situ evaluation of the machining processes in an industrial environment. This is due to the high non-linear nature of FEM simulations of machining processes, which require considerable computational resources. On the other hand, machine learning methods are known to capture complex non-linear behaviors. One of the most widely applied material models in cutting simulations is the Johnson-Cook material model, which has a great influence on the output of the cutting simulations and contributes to the non-linear behavior of the models, but its influence on cutting forces is sometimes difficult to assess beforehand. Therefore, this research aims to capture the highly non-linear behavior of the material model by using a dataset of multiple short-duration cutting simulations from Abaqus to learn the relationship of the Johnson-Cook material model parameters and the resulting cutting forces for a constant set of cutting conditions. The goal is to shorten the time to simulate cutting forces by encapsulating complex cutting conditions in dependence of material parameters in a single model. A total of five different models are trained and the performance is evaluated. The results show that Gradient Boosted Machines capture the influence of varying material model parameters the best and enable good predictions of cutting forces as well as deliver insights into the relevance of the material parameters for the cutting and thrust forces in orthogonal cutting.
Open Access
Generalizable process monitoring for FFF 3D printing with machine vision
(2023) Werkle, Kim Torben; Trage, Caroline; Wolf, Jan; Möhring, Hans-Christian
Additive manufacturing has experienced a surge in popularity in both commercial and private sectors over the past decade due to the growing demand for affordable and highly customized products, which are often in direct opposition to the requirements of traditional subtractive manufacturing. Fused Filament Fabrication (FFF) has emerged as the most widely-used additive manufacturing technology, despite challenges associated with achieving contour accuracy. To address this issue, the authors have developed a novel camera-based process monitoring method that enables the detection of errors in the printing process through a layer-by-layer comparison of the actual contour and the target contour obtained via G-Code processing. This method is generalizable and can be applied to different printer models with minimal hardware adjustments using off-the-shelf components. The authors have demonstrated the effectiveness of this method in automatically detecting both coarse and small contour deviations in 3D-printed parts.