Browsing by Author "Yu, Zexin"

Now showing 1 - 3 of 3

Open Access
Anisotropic hyperelastic strain energy function for carbon fiber woven fabrics
(2024) Cai, Renye; Zhang, Heng; Lai, Chenxiang; Yu, Zexin; Zeng, Xiangkun; Wu, Min; Wang, Yankun; Huang, Qisen; Zhu, Yiwei; Kong, Chunyu
The present paper introduces an innovative strain energy function (SEF) for incompressible anisotropic fiber-reinforced materials. This SEF is specifically designed to understand the mechanical behavior of carbon fiber-woven fabric. The considered model combines polyconvex invariants forming an integrity basisin polynomial form, which is inspired by the application of Noether’s theorem. A single solution can be obtained during the identification because of the relationship between the SEF we have constructed and the material parameters, which are linearly dependent. The six material parameters were precisely determined through a comparison between the closed-form solutions from our model and the corresponding tensile experimental data with different stretching ratios, with determination coefficients consistently reaching a remarkable value of 0.99. When considering only uniaxial tensile tests, our model can be simplified from a quadratic polynomial to a linear polynomial, thereby reducing the number of material parameters required from six to four, while the fidelity of the model’s predictive accuracy remains unaltered. The comparison between the results of numerical calculations and experiments proves the efficiency and accuracy of the method.
Open Access
Numerical analysis of the cell droplet loading process in cell printing
(2024) Wang, Yankun; Pang, Fagui; Lai, Shushan; Cai, Renye; Lai, Chenxiang; Yu, Zexin; Zhu, Yiwei; Wu, Min; Zhang, Heng; Kong, Chunyu
Cell printing is a promising technology in tissue engineering, with which the complex three-dimensional tissue constructs can be formed by sequentially printing the cells layer by layer. Though some cell printing experiments with commercial inkjet printers show the possibility of this idea, there are some problems, such as cell damage due the mechanical impact during cell direct writing, which include two processes of cell ejection and cell landing. Cell damage observed during the bioprinting process is often simply attributed to interactions between cells and substrate. However, in reality, cell damage can also arise from complex mechanical effects caused by collisions between cell droplets during continuous printing processes. The objective of this research is to numerically simulate the collision effects between continuously printed cell droplets within the bioprinting process, with a particular focus on analyzing the consequent cell droplet deformation and stress distribution. The influence of gravity force was ignored, cell droplet landing was divided into four phases, the first phase is cell droplet free falling at a certain velocity; the second phase is the collision between the descending cell droplet and the pre-existing cell droplets that have been previously printed onto the substrate. This collision results in significant deformation of the cell membranes of both cell droplets in contact; the third phase is the cell droplet hitting a rigid body substrate; the fourth phase is the cell droplet being bounced. We conducted a qualitative analysis of the stress and strain of cell droplets during the cell printing process to evaluate the influence of different parameters on the printing effect. The results indicate that an increase in jet velocity leads to an increase in stress on cell droplets, thereby increasing the probability of cell damage. Adding cell droplet layers on the substrate can effectively reduce the impact force caused by collisions. Smaller droplets are more susceptible to rupture at higher velocities. These findings provide a scientific basis for optimizing cell printing parameters.
Open Access
Prediction of in-flight particle properties and mechanical performances of HVOF-sprayed NiCr-Cr3C2 coatings based on a hierarchical neural network
(2023) Gui, Longen; Wang, Botong; Cai, Renye; Yu, Zexin; Liu, Meimei; Zhu, Qixin; Xie, Yingchun; Liu, Shaowu; Killinger, Andreas
High-velocity oxygen fuel (HVOF) spraying is a promising technique for depositing protective coatings. The performances of HVOF-sprayed coatings are affected by in-flight particle properties, such as temperature and velocity, that are controlled by the spraying parameters. However, obtaining the desired coatings through experimental methods alone is challenging, owing to the complex physical and chemical processes involved in the HVOF approach. Compared with traditional experimental methods, a novel method for optimizing and predicting coating performance is presented herein; this method involves combining machine learning techniques with thermal spray technology. Herein, we firstly introduce physics-informed neural networks (PINNs) and convolutional neural networks (CNNs) to address the overfitting problem in small-sample algorithms and then apply the algorithms to HVOF processes and HVOF-sprayed coatings. We proposed the PINN and CNN hierarchical neural network to establish prediction models for the in-flight particle properties and performances of NiCr-Cr3C2 coatings (e.g., porosity, microhardness, and wear rate). Additionally, a random forest model is used to evaluate the relative importance of the effect of the spraying parameters on the properties of in-flight particles and coating performance. We find that the particle temperature and velocity as well as the coating performances (porosity, wear resistance, and microhardness) can be predicted with up to 99% accuracy and that the spraying distance and velocity of in-flight particles exert the most substantial effects on the in-flight particle properties and coating performance, respectively. This study can serve as a theoretical reference for the development of intelligent HVOF systems in the future.