Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen:
Langanzeige der Metadaten
DC ElementWertSprache
dc.contributor.advisorKnippers, Jan (Prof. Dr.-Ing.)-
dc.contributor.authorLa Magna, Riccardo-
dc.description.abstractCommonly referred to as bending-active, the term has come to describe a wide variety of systems that employ the large defor-mation of their constituent components as a primary shape-forming strategy. It is generally impossible to separate the struc-ture from its geometry, and this is even more true for bending-active systems. Placed at the intersection between geometry, de-sign and engineering, the principle objective of this thesis is to develop an understanding of the structural and architectural po-tential of bending-active systems beyond the established typolo-gies which have been investigated so far. The main focus is set on systems that make use of surface-like elements as principle build-ing blocks, as opposed to previous and existing projects that pre-dominantly employed linear components such as rods and laths. This property places the analysed test cases and developed proto-types within a specific category of bending-active systems known as bending-active plate structures. The first chapters serve as a general introduction to the topic. An overview of relevant recent projects is presented in the introduction, followed by a discussion on the scope of research on bending-active structures. The following chapters lay the theoretical basis in terms of geometry of surfaces and mechanical behaviour of plates. This dual and complementary description serves as the necessary background to understand the limits and potential associated to the deformability of plate elements. The following chapter delves into the first of the two strategies developed as part of this research. Termed form conversion, this approach establishes a one-to-one relationship between the initial base surface and its bending-active discrete counterpart. The chapter proceeds with the presentation of a series of full-scale prototypes that were realised to test the validity of the form con-version approach. Geometrical and mechanical features are dis-cussed in the conclusion of the chapter. The second developed method, named integral approach, is pre-sented in the next section. This approach takes advantage of the inherent deformation properties of explicitly designed material patterns. The description of the method is followed by the presen-tation and discussion of the prototypes chosen to test the integral approach. Finally, the thesis concludes with a critical discussion of the presented approaches and a discussion on potential developments for future research.en
dc.publisherStuttgart : Institut für Tragkonstruktionen und Konstruktives Entwerfen, Universität Stuttgartde
dc.relation.ispartofseriesForschungsberichte aus dem Institut für Tragkonstruktionen und Konstruktives Entwerfen, Universität Stuttgart;43-
dc.titleBending-active plates : strategies for the induction of curvature through the means of elastic bending of plate-based structuresen
ubs.fakultaetArchitektur und Stadtplanungde
ubs.institutInstitut für Tragkonstruktionen und Konstruktives Entwerfende
ubs.publikation.seitenVIII, 161de
ubs.schriftenreihe.nameForschungsberichte aus dem Institut für Tragkonstruktionen und Konstruktives Entwerfen, Universität Stuttgartde
ubs.thesis.grantorArchitektur und Stadtplanungde
Enthalten in den Sammlungen:01 Fakultät Architektur und Stadtplanung

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
FB_43 PhD La Magna.pdf26,72 MBAdobe PDFÖffnen/Anzeigen

Alle Ressourcen in diesem Repositorium sind urheberrechtlich geschützt.