Influência da geometria da ferramenta e das condições de usinagem no torneamento de alumínio com diamante monocristalino

Mariolani, José Ricardo Lenzi; Heisel, Uwe; Roth, Günther

Influência da geometria da ferramenta e das condições de usinagem no torneamento de alumínio com diamante monocristalino

dc.contributor.author	Mariolani, José Ricardo Lenzi	de
dc.contributor.author	Heisel, Uwe	de
dc.contributor.author	Roth, Günther	de
dc.date.accessioned	2009-12-09	de
dc.date.accessioned	2016-03-31T11:41:52Z
dc.date.available	2009-12-09	de
dc.date.available	2016-03-31T11:41:52Z
dc.date.issued	1992	de
dc.description.abstract	The results of an experimental investigation on the influence of the tool geometry and the cutting parameters on the surface quality of Aluminium faced with single crystal diamond tools are presented. The best surface qualities were obtained with a facetted cutter with cutting edge of 1,5 mm at a tool setting angle of 0,5°. The cutting parameter of most influence was the feed, being the smallest values of roughness obtained for 3,6 and 7,3µm/rev. The depth of cut exhibited few influence (in the tested range of depths) on the surface quality and the cutting speed showed no influence. It was realized that the right cooling of the cutting zone is decisive for a good surface quality.	en
dc.identifier.other	318540371	de
dc.identifier.uri	http://nbn-resolving.de/urn:nbn:de:bsz:93-opus-48696	de
dc.identifier.uri	http://elib.uni-stuttgart.de/handle/11682/7093
dc.identifier.uri	http://dx.doi.org/10.18419/opus-7076
dc.language.iso	pt	de
dc.rights	info:eu-repo/semantics/openAccess	de
dc.subject.classification	Diamantwerkzeug , Schneidengeometrie	de
dc.subject.ddc	670	de
dc.title	Influência da geometria da ferramenta e das condições de usinagem no torneamento de alumínio com diamante monocristalino	pt
dc.title.alternative	Influence of the tool geometry and the cutting parameters on turning of aluminium with single crystal diamond tool	en
dc.type	article	de
ubs.fakultaet	Fakultätsübergreifend / Sonstige Einrichtung	de
ubs.fakultaet	Fakultät Konstruktions-, Produktions- und Fahrzeugtechnik	de
ubs.institut	Sonstige Einrichtung	de
ubs.institut	Institut für Werkzeugmaschinen	de
ubs.opusid	4869	de
ubs.publikation.source	Revista brasileira de ciências mecânicas 14 (1992), Nr. 1, S. 57-74	de
ubs.publikation.typ	Zeitschriftenartikel	de

Files

Original bundle

Now showing 1 - 1 of 1

Name:: hei95.pdf
Size:: 3.55 MB
Format:: Adobe Portable Document Format

Download

License bundle

Now showing 1 - 1 of 1

Name:: license.txt
Size:: 1021 B
Format:: Plain Text
Description:

Download

Collections

15 Fakultätsübergreifend / Sonstige Einrichtung