05 Fakultät Informatik, Elektrotechnik und Informationstechnik

Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/6

Browse

Filters

Settings

Institute: search.filters.UBSInstitut.Fakultätsübergreifend / Sonstige EinrichtungAuthor: search.filters.author.Wagner, Stefan

Search Results

Now showing 1 - 10 of 26
  • Thumbnail Image
    ItemOpen Access
    Empirical research plan: effects of sketching on program comprehension
    (2016) Baltes, Sebastian; Wagner, Stefan
    Sketching is an important means of communication in software engineering practice. Yet, there is little research investigating the use of sketches. We want to contribute a better understanding of sketching, in particular its use during program comprehension. We propose a controlled experiment to investigate the effectiveness and efficiency of program comprehension with the support of sketches as well as what sketches are used in what way.
  • Thumbnail Image
    ItemOpen Access
    A comprehensive safety engineering approach for software-intensive systems based on STPA
    (2015) Abdulkhaleq, Asim; Wagner, Stefan; Leveson, Nancy
    Formal verification and testing are complementary approaches which are used in the development process to verify the functional correctness of software. However, the correctness of software cannot ensure the safe operation of safety-critical software systems. The software must be verified against its safety requirements which are identified by safety analysis, to ensure that potential hazardous causes cannot occur. The complexity of software makes defining appropriate software safety requirements with traditional safety analysis techniques difficult. STPA (Systems-Theoretic Processes Analysis) is a unique safety analysis approach that has been developed to identify system hazards, including the software-related hazards. This paper presents a comprehensive safety engineering approach based on STPA, including software testing and model checking approaches for the purpose of developing safe software. The proposed approach can be embedded within a defined software engineering process or applied to existing software systems, allow software and safety engineers integrate the analysis of software risks with their verification. The application of the proposed approach is illustrated with an automotive software controller.
  • Thumbnail Image
    ItemOpen Access
    Modelling the quality economics of defect-detection techniques
    (2006) Wagner, Stefan
    There are various ways to evaluate defect-detection techniques. However, for a comprehensive evaluation the only possibility is to reduce all influencing factors to costs. There are already some models and metrics for the cost of quality that can be used in that context. These models allow the structuring of the costs but do not show all influencing factors and their relationships. This paper proposes an analytical model for the economics of defect-detection techniques that can be used for analysis and optimisation of the usage of such techniques. In particular we analyse the sensitivity of the model and how the model can be applied in practice.
  • Thumbnail Image
    ItemOpen Access
    Software quality models : purposes, usage scenarios and requirements
    (2009) Deißenböck, Florian; Juergens, Elmar; Lochmann, Klaus; Wagner, Stefan
    Software quality models are a well-accepted means to support quality management of software systems. Over the last 30 years, a multitude of quality models have been proposed and applied with varying degrees of success. Despite successes and standardisation efforts, quality models are still being criticised, as their application in practice exhibits various problems. To some extent, this criticism is caused by an unclear definition of what quality models are and which purposes they serve. Beyond this, there is a lack of explicitly stated requirements for quality models with respect to their intended mode of application. To remedy this, this paper describes purposes and usage scenarios of quality models and, based on the literature and experiences from the authors, collects critique of existing models. From this, general requirements for quality models are derived. The requirements can be used to support the evaluation of existing quality models for a given context or to guide further quality model development.
  • Thumbnail Image
    ItemOpen Access
    On the impact of service-oriented patterns on software evolvability: a controlled experiment and metric-based analysis
    (2019) Bogner, Justus; Wagner, Stefan; Zimmermann, Alfred
    Background: Design patterns are supposed to improve various quality attributes of software systems. However, there is controversial quantitative evidence of this impact. Especially for younger paradigms such as service- and Microservice-based systems, there is a lack of empirical studies. Objective: In this study, we focused on the effect of four service-based patterns - namely Process Abstraction, Service Façade, Decomposed Capability, and Event-Driven Messaging - on the evolvability of a system from the viewpoint of inexperienced developers. Method: We conducted a controlled experiment with Bachelor students (N = 69). Two functionally equivalent versions of a service-based web shop - one with patterns (treatment group), one without (control group) - had to be changed and extended in three tasks. We measured evolvability by the effectiveness and efficiency of the participants in these tasks. Additionally, we compared both system versions with nine structural maintainability metrics for size, granularity, complexity, cohesion, and coupling. Results: Both experiment groups were able to complete a similar number of tasks within the allowed 90 min. Median effectiveness was 1/3. Mean efficiency was 12% higher in the treatment group, but this difference was not statistically significant. Only for the third task, we found statistical support for accepting the alternative hypothesis that the pattern version led to higher efficiency. In the metric analysis, the pattern version had worse measurements for size and granularity while simultaneously having slightly better values for coupling metrics. Complexity and cohesion were not impacted. Interpretation: For the experiment, our analysis suggests that the difference in efficiency is stronger with more experienced participants and increased from task to task. With respect to the metrics, the patterns introduce additional volume in the system, but also seem to decrease coupling in some areas. Conclusions: Overall, there was no clear evidence for a decisive positive effect of using service-based patterns, neither for the student experiment nor for the metric analysis. This effect might only be visible in an experiment setting with higher initial effort to understand the system or with more experienced developers.
  • Thumbnail Image
    ItemOpen Access
    The Quamoco product quality modelling and assessment approach
    (2012) Wagner, Stefan; Lochmann, Klaus; Heinemann, Lars; Kläs, Michael; Trendowicz, Adam; Plösch, Reinhold; Seidl, Andreas; Goeb, Andreas; Streit, Jonathan
    Published software quality models either provide abstract quality attributes or concrete quality assessments. There are no models that seamlessly integrate both aspects. In the project Quamoco, we built a comprehensive approach with the aim to close this gap. For this, we developed in several iterations a meta quality model specifying general concepts, a quality base model covering the most important quality factors and a quality assessment approach. The meta model introduces the new concept of a product factor, which bridges the gap between concrete measurements and abstract quality aspects. Product factors have measures and instruments to operationalise quality by measurements from manual inspection and tool analysis. The base model uses the ISO 25010 quality attributes, which we refine by 200 factors and 600 measures for Java and C# systems. We found in several empirical validations that the assessment results fit to the expectations of experts for the corresponding systems. The empirical analyses also showed that several of the correlations are statistically significant and that the maintainability part of the base model has the highest correlation, which fits to the fact that this part is the most comprehensive. Although we still see room for extending and improving the base model, it shows a high correspondence with expert opinions and hence is able to form the basis for repeatable and understandable quality assessments in practice.
  • Thumbnail Image
    ItemOpen Access
    An empirical study on changing leadership in agile teams
    (2021) Spiegler, Simone V.; Heinecke, Christoph; Wagner, Stefan
    An increasing number of companies aim to enable their development teams to work in an agile manner. When introducing agile teams, companies face several challenges. This paper explores the kind of leadership needed to support teams to work in an agile way. One theoretical agile leadership concept describes a Scrum Master who is supposed to empower the team to lead itself. Empirical findings on such a leadership role are controversial. We still have not understood how leadership unfolds in a team that is by definition self-organizing. Further exploration is needed to better understand leadership in agile teams. Our goal is to explore how leadership changes while the team matures using the example of the Scrum Master. Through a grounded theory study containing 75 practitioners from 11 divisions at the Robert Bosch GmbH we identified a set of nine leadership roles that are transferred from the Scrum Master to the Development Team while it matures. We uncovered that a leadership gap and a supportive internal team climate are enablers of the role transfer process, whereas role conflicts may diminish the role transfer. To make the Scrum Master change in a mature team, team members need to receive trust and freedom to take on a leadership role which was previously filled by the Scrum Master. We conclude with practical implications for managers, Product Owners, Development Teams and Scrum Masters which they can apply in real settings.
  • Thumbnail Image
    ItemOpen Access
    Evaluate and control service and transaction dependability of complex IoT systems
    (2021) Niedermaier, Sina; Zelenik, Thommy; Heisse, Stefan; Wagner, Stefan
    Observing and controlling the dependability of service provision of complex IoT systems is challenging. In practice, many organizations struggle to derive consumer needs related to quality and to observe and quantify the service provision in the context of the dynamic behavior of a complex distributed system. In this paper, we present an approach to define and evaluate the dependability of complex IoT systems. Our approach is an adaptation of the ISO/IEC 25040, an international standard for the evaluation process for system and software quality, which is part of the systems and software quality requirements and evaluation (SQuaRE) series. Our approach was designed and evaluated with action research in an industrial study at Robert Bosch GmbH. Based on the framework of the SQuaRE series, we integrated different elements of site reliability engineering (SRE) and combined them with distributed tracing as a promising measurement method. Our approach introduces the IoT transaction concept to reduce modeling and observation efforts while increasing operationalization to measure performance against dependability targets. Our adaption was effectively applied, consumer-centricity along different system stakeholders were enhanced, and negative consequences of organizational silos were reduced. This has improved the dependability evaluation of service provision to enable fast feedback cycles for service performance control and improvement.
  • Thumbnail Image
    ItemOpen Access
    Interdisciplinary system courses - teaching agile systems engineering
    (2019) Seitz, Andreas; Avezum, Mariana; Bruegge, Bernd; Wagner, Stefan
    With the advent of technologies like the Internet of Things, Industry 4.0 and Cyber-Physical Systems, many software engineering courses turn into system engineering courses. Recent advances in technologies such as 3D printing and low-cost micro controllers enable to teach agile hard- and software co-design in system engineering courses. In this paper, we describe Interdisciplinary System Courses (ISC) - a teaching approach based on interdisciplinary projects, light-weight agile techniques and solving real problems by integrating industry customers. We describe our experiences from an exploratory case study where we applied ISC in a two-week international summer school with a customer from the aerospace industry. We derive a set of hypotheses on the effects of ISC.
  • Thumbnail Image
    ItemOpen Access
    An industrial case study on the evaluation of a safety engineering approach for software-intensive systems in the automotive domain
    (2016) Abdulkhaleq, Asim; Vöst, Sebastian; Wagner, Stefan; Thomas, John
    Safety remains one of the essential and vital aspects in today's automotive systems. These systems, however, become ever more complex and dependent on software which is responsible for most of their critical functions. Therefore, the software components need to be analysed and verified appropriately in the context of software safety. The complexity of software systems makes defining software safety requirements with traditional safety analysis techniques difficult. A new technique called STPA (Systems-Theoretic Process Analysis) based on system and control theory has been developed by Leveson to cope with complex systems. Based on STPA, we have developed a comprehensive software safety engineering approach in which the software and safety engineers integrate the analysis of software risks with their verification to recognize the software-related hazards and reduce the risks to a low level. In this paper, we explore and evaluate the application of our approach to a real industrial system in the automotive domain. The case study was conducted analysing the software controller of the Active Cruise Control System (ACC) of the BMW Group.