05 Fakultät Informatik, Elektrotechnik und Informationstechnik
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/6
Browse
6 results
Search Results
Item Open Access Sharp MIR plasmonic modes in gratings made of heavily doped pulsed laser-melted Ge1-xSnx(2023) Berkmann, Fritz; Steuer, Oliver; Ganss, Fabian; Prucnal, Slawomir; Schwarz, Daniel; Fischer, Inga Anita; Schulze, JörgItem Open Access Top‐down approach to study chemical and electronic properties of perovskite solar cells : sputtered depth profiling versus tapered cross‐sectional photoelectron spectroscopies(2021) Das, Chittaranjan; Zia, Waqas; Mortan, Claudiu; Hussain, Navid; Saliba, Michael; Ingo Flege, Jan; Kot, MałgorzataA study of the chemical and electronic properties of various layers across perovskite solar cell (PSC) stacks is challenging. Depth‐profiling photoemission spectroscopy can be used to study the surface, interface, and bulk properties of different layers in PSCs, which influence the overall performance of these devices. Herein, sputter depth profiling (SDP) and tapered cross‐sectional (TCS) photoelectron spectroscopies (PESs) are used to study highly efficient mixed halide PSCs. It is found that the most used SDP‐PES technique degrades the organic and deforms the inorganic materials during sputtering of the PSCs while the TCS‐PES method is less destructive and can determine the chemical and electronic properties of all layers precisely. The SDP‐PES dissociates the chemical bonding in the spiro‐MeOTAD and perovskite layer and reduces the TiO2, which causes the chemical analysis to be unreliable. The TCS‐PES revealed a band bending only at the spiro‐MeOTAD/perovskite interface of about 0.7 eV. Both the TCS and SDP‐PES show that the perovskite layer is inhomogeneous and has a higher amount of bromine at the perovskite/TiO2 interface.Item Open Access Plasmonic gratings from highly doped Ge1-ySny films on Si(2021) Berkmann, Fritz; Ayasse, Markus; Schlipf, Jon; Mörz, Florian; Weißhaupt, David; Oehme, Michael; Prucnal, Slawomir; Kawaguchi, Yuma; Schwarz, Daniel; Fischer, Inga Anita; Schulze, JörgPlasmonic modes in metal structures are of great interest for optical applications. While metals such as Au and Ag are highly suitable for such applications at visible wavelengths, their high Drude losses limit their usefulness at mid-infrared wavelengths. Highly n-doped Ge1-ySny alloys are interesting possible alternative materials for plasmonic applications in this wavelength range. Here, we investigate the use of highly n-doped Ge1-ySny films grown directly on Si by molecular beam epitaxy with varying Sn-content from 0% up to 7.6% for plasmonic grating structures. We compare plasma wavelengths and relaxation times obtained from electrical and optical characterization. While theoretical considerations indicate that the decreasing effective mass with increasing Sn content in Ge1-ySny films could improve performance for plasmonic applications, our optical characterization results show that the utilization of Ge1-ySny films grown directly on Si is only beneficial if material quality can be improved.Item Open Access Raman shifts in MBE‐grown SixGe1 - x - ySny alloys with large Si content(2021) Schlipf, Jon; Tetzner, Henriette; Spirito, Davide; Manganelli, Costanza L.; Capellini, Giovanni; Huang, Michael R. S.; Koch, Christoph T.; Clausen, Caterina J.; Elsayed, Ahmed; Oehme, Michael; Chiussi, Stefano; Schulze, Jörg; Fischer, Inga A.We examine the Raman shift in silicon-germanium-tin alloys with high silicon content grown on a germanium virtual substrate by molecular beam epitaxy. The Raman shifts of the three most prominent modes, Si-Si, Si-Ge, and Ge-Ge, are measured and compared with results in previous literature. We analyze and fit the dependence of the three modes on the composition and strain of the semiconductor alloys. We also demonstrate the calculation of the composition and strain of SixGe1 - x - ySny from the Raman shifts alone, based on the fitted relationships. Our analysis extends previous results to samples lattice matched on Ge and with higher Si content than in prior comprehensive Raman analyses, thus making Raman measurements as a local, fast, and nondestructive characterization technique accessible for a wider compositional range of these ternary alloys for silicon‐based photonic and microelectronic devices.Item Open Access Band-gap and strain engineering in GeSn alloys using post-growth pulsed laser melting(2022) Steuer, Oliver; Schwarz, Daniel; Oehme, Michael; Schulze, Jörg; Mączko, Herbert; Kudrawiec, Robert; Fischer, Inga A.; Heller, René; Hübner, René; Khan, Muhammad Moazzam; Georgiev, Yordan M.; Zhou, Shengqiang; Helm, Manfred; Prucnal, SlawomirThe pseudomorphic growth of Ge1-xSnx on Ge causes in-plane compressive strain, which degrades the superior properties of the Ge1-xSnx alloys. Therefore, efficient strain engineering is required. In this article, we present strain and band-gap engineering in Ge1-xSnx alloys grown on Ge a virtual substrate using post-growth nanosecond pulsed laser melting (PLM). Micro-Raman and x-ray diffraction (XRD) show that the initial in-plane compressive strain is removed. Moreover, for PLM energy densities higher than 0.5 J cm-2, the Ge0.89Sn0.11 layer becomes tensile strained. Simultaneously, as revealed by Rutherford Backscattering spectrometry, cross-sectional transmission electron microscopy investigations and XRD the crystalline quality and Sn-distribution in PLM-treated Ge0.89Sn0.11 layers are only slightly affected. Additionally, the change of the band structure after PLM is confirmed by low-temperature photoreflectance measurements. The presented results prove that post-growth ns-range PLM is an effective way for band-gap and strain engineering in highly-mismatched alloys.Item Open Access Audio guide for visually impaired people based on combination of stereo vision and musical tones(2019) Simões, Walter C. S. S.; Silva, Yuri M. L. R.; Pio, José Luiz de S.; Jazdi, Nasser; F. de Lucena, VicenteIndoor navigation systems offer many application possibilities for people who need information about the scenery and the possible fixed and mobile obstacles placed along the paths. In these systems, the main factors considered for their construction and evaluation are the level of accuracy and the delivery time of the information. However, it is necessary to notice obstacles placed above the user’s waistline to avoid accidents and collisions. In this paper, different methodologies are associated to define a hybrid navigation model called iterative pedestrian dead reckoning (i-PDR). i-PDR combines the PDR algorithm with a Kalman linear filter to correct the location, reducing the system’s margin of error iteratively. Obstacle perception was addressed through the use of stereo vision combined with a musical sounding scheme and spoken instructions that covered an angle of 120 degrees in front of the user. The results obtained in the margin of error and the maximum processing time are 0.70 m and 0.09 s, respectively, with obstacles at ground level and suspended with an accuracy equivalent to 90%.