05 Fakultät Informatik, Elektrotechnik und Informationstechnik
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/6
Browse
8 results
Search Results
Item Open Access A muscle model for injury simulation(2023) Millard, Matthew; Kempter, Fabian; Fehr, Jörg; Stutzig, Norman; Siebert, TobiasCar accidents frequently cause neck injuries that are painful, expensive, and difficult to simulate. The movements that lead to neck injury include phases in which the neck muscles are actively lengthened. Actively lengthened muscle can develop large forces that greatly exceed the maximum isometric force. Although Hill-type models are often used to simulate human movement, this model has no mechanism to develop large tensions during active lengthening. When used to simulate neck injury, a Hill model will underestimate the risk of injury to the muscles but may overestimate the risk of injury to the structures that the muscles protect. We have developed a musculotendon model that includes the viscoelasticity of attached crossbridges and has an active titin element. In this work we evaluate the proposed model to a Hill model by simulating the experiments of Leonard et al. [1] that feature extreme active lengthening.Item Open Access Efficient modeling and computation methods for robust AMS system design(2018) Gil, Leandro; Radetzki, Martin (Prof. Dr.-Ing.)This dissertation copes with the challenge regarding the development of model based design tools that better support the mixed analog and digital parts design of embedded systems. It focuses on the conception of efficient modeling and simulation methods that adequately support emerging system level design methodologies. Starting with a deep analysis of the design activities, many weak points of today’s system level design tools were captured. After considering the modeling and simulation of power electronic circuits for designing low energy embedded systems, a novel signal model that efficiently captures the dynamic behavior of analog and digital circuits is proposed and utilized for the development of computation methods that enable the fast and accurate system level simulation of AMS systems. In order to support a stepwise system design refinement which is based on the essential system properties, behavior computation methods for linear and nonlinear analog circuits based on the novel signal model are presented and compared regarding the performance, accuracy and stability with existing numerical and analytical methods for circuit simulation. The novel signal model in combination with the method proposed to efficiently cope with the interaction of analog and digital circuits as well as the new method for digital circuit simulation are the key contributions of this dissertation because they allow the concurrent state and event based simulation of analog and digital circuits. Using a synchronous data flow model of computation for scheduling the execution of the analog and digital model parts, very fast AMS system simulations are carried out. As the best behavior abstraction for analog and digital circuits may be selected without the need of changing component interfaces, the implementation, validation and verification of AMS systems take advantage of the novel mixed signal representation. Changes on the modeling abstraction level do not affect the experiment setup. The second part of this work deals with the robust design of AMS systems and its verification. After defining a mixed sensitivity based robustness evaluation index for AMS control systems, a general robust design method leading to optimal controller tuning is presented. To avoid over-conservative AMS system designs, the proposed robust design optimization method considers parametric uncertainty and nonlinear model characteristics. The system properties in the frequency domain needed to evaluate the system robustness during parameter optimization are obtained from the proposed signal model. Further advantages of the presented signal model for the computation of control system performance evaluation indexes in the time domain are also investigated in combination with range arithmetic. A novel approach for capturing parameter correlations in range arithmetic based circuit behavior computation is proposed as a step towards a holistic modeling method for the robust design of AMS systems. The several modeling and computation methods proposed to improve the support of design methodologies and tools for AMS system are validated and evaluated in the course of this dissertation considering many aspects of the modeling, simulation, design and verification of a low power embedded system implementing Adaptive Voltage and Frequency Scaling (AVFS) for energy saving.Item Open Access Stress-aware periodic test of interconnects(2022) Sadeghi-Kohan, Somayeh; Hellebrand, Sybille; Wunderlich, Hans-JoachimSafety-critical systems have to follow extremely high dependability requirements as specified in the standards for automotive, air, and space applications. The required high fault coverage at runtime is usually obtained by a combination of concurrent error detection or correction and periodic tests within rather short time intervals. The concurrent scheme ensures the integrity of computed results while the periodic test has to identify potential aging problems and to prevent any fault accumulation which may invalidate the concurrent error detection mechanism. Such periodic built-in self-test (BIST) schemes are already commercialized for memories and for random logic. The paper at hand extends this approach to interconnect structures. A BIST scheme is presented which targets interconnect defects before they will actually affect the system functionality at nominal speed. A BIST schedule is developed which significantly reduces aging caused by electromigration during the lifetime application of the periodic test.Item Open Access Cervical muscle reflexes during lateral accelerations(2023) Millard, Matthew; Hunger, Susanne; Broß, Lisa; Fehr, Jörg; Holzapfel, Christian; Stutzig, Norman; Siebert, TobiasAutonomous vehicles will allow a variety of seating orientations that may change the risk of neck injury during an accident. Having a rotated head at the time of a rear-end collision in a conventional vehicle is associated with a higher risk of acute and chronic whiplash. The change in posture affects both the movement of the head and the response of the muscles. We are studying the reflexes of the muscles of the neck so that we can validate the responses of digital human body models that are used in crash simulations. The neck movements and muscle activity of 21 participants (11 female) were recorded at the Stuttgart FKFS mechanical driving simulator. During the maneuver we recorded the acceleration of the seat and electromyographic (EMG) signals from the sternocleidomastoid (STR) muscles using a Biopac MP 160 system (USA). As intuition would suggest, the reflexes of the muscles of the neck are sensitive to posture and the direction of the acceleration.Item Open Access Whiplash simulation: how muscle modelling and movement interact(2022) Millard, Matthew; Siebert, Tobias; Stutzig, Norman; Fehr, JörgWhiplash injury and associated disorders are costly to society and individuals. Accurate simulations of neck movement during car accidents are needed to assess the risk of whiplash injury. Existing simulations indicate that Hill-type muscle models are too compliant, and as a result, predict more neck movement than is observed during in-vivo experiments. Simulating head and neck movement is challenging because many of the neck muscles operate on the descending limb of the force-length curve, a region that Hill-type models inaccurately capture. Hill-type muscle models have negative stiffness on the descending limb of the force-length curve and so develop less force the more they are lengthened. Biological muscle, in contrast, can develop large transient forces during active lengthening and sustain large forces when aggressively lengthened. Recently, a muscle model has been developed that mimics the active impedance of muscle in the short range and can capture the large forces generated during extreme lengthening. In this work, we will compare the accuracy of simulated neck movements, using both a Hill-type model and the model of Millard et al., to the in-vivo neck movement. If successful, the improved accuracy of our simulations will make it possible to predict and help prevent neck injury.Item Open Access Dependable reconfigurable scan networks(2022) Lylina, Natalia; Wunderlich, Hans-Joachim (Prof.)The dependability of modern devices is enhanced by integrating an extensive number of extra-functional instruments. These are needed to facilitate cost-efficient bring-up, debug, test, diagnosis, and adaptivity in the field and might include, e.g., sensors, aging monitors, Logic, and Memory Built-In Self-Test (BIST) registers. Reconfigurable Scan Networks (RSNs) provide a flexible way to access such instruments as well the device's registers throughout the lifetime, starting from post-silicon validation (PSV) through manufacturing test and finally during in-field operation. At the same time, the dependability properties of the system can be affected through an improper RSN integration. This doctoral project overcomes these problems and establishes a methodology to integrate dependable RSNs for a given system considering the most relevant dependability aspects, such as robustness, testability, and security compliance of RSNs.Item Open Access Brain-inspired hyperdimensional computing for robust and lightweight machine learning(2024) Genssler, Paul R.; Amrouch, Hussam (Prof. Dr.-Ing.)This thesis investigates hyperdimensional computing (HDC) as an emerging machine learning method. HDC’s integration with in-memory computing architectures is explored to address challenges at both application and technology levels, particularly in the domain of semiconductor test and reliability. HDC’s inherent redundancy offers robustness to errors, making it suitable for applications like transistor aging modeling, circuit recognition, and wafer map defect pattern classification. However, it is computationally demanding for off-the-shelf systems, motivating the development of efficient architectures using FPGA, custom chips, and FeFET-based in-memory computing. This integration bridges the gap between technology and application levels, enhancing efficiency while addressing reliability trade-offs. The work also adapts HDC training to mitigate errors from non-volatile memories, ensuring robust performance. Overall, the thesis demonstrates HDC’s potential for lightweight, efficient ML systems and novel applications, overcoming limitations of traditional approaches.Item Open Access Printed temperature sensor array for high-resolution thermal mapping(2022) Bücher, Tim; Huber, Robert; Eschenbaum, Carsten; Mertens, Adrian; Lemmer, Uli; Amrouch, HussamFully-printed temperature sensor arrays - based on a flexible substrate and featuring a high spatial-temperature resolution - are immensely advantageous across a host of disciplines. These range from healthcare, quality and environmental monitoring to emerging technologies, such as artificial skins in soft robotics. Other noteworthy applications extend to the fields of power electronics and microelectronics, particularly thermal management for multi-core processor chips. However, the scope of temperature sensors is currently hindered by costly and complex manufacturing processes. Meanwhile, printed versions are rife with challenges pertaining to array size and sensor density. In this paper, we present a passive matrix sensor design consisting of two separate silver electrodes that sandwich one layer of sensing material, composed of poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS). This results in appreciably high sensor densities of 100 sensor pixels per cm 2for spatial-temperature readings, while a small array size is maintained. Thus, a major impediment to the expansive application of these sensors is efficiently resolved. To realize fast and accurate interpretation of the sensor data, a neural network (NN) is trained and employed for temperature predictions. This successfully accounts for potential crosstalk between adjacent sensors. The spatial-temperature resolution is investigated with a specially-printed silver micro-heater structure. Ultimately, a fairly high spatial temperature prediction accuracy of 1.22 °C is attained.