05 Fakultät Informatik, Elektrotechnik und Informationstechnik
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/6
Browse
8 results
Search Results
Item Open Access All-perovskite tandem solar cells : from fundamentals to technological progress(2024) Lim, Jaekeun; Park, Nam-Gyu; Seok, Sang Il; Saliba, MichaelOrganic-inorganic perovskite materials have gradually progressed from single-junction solar cells to tandem (double) or even multi-junction (triple-junction) solar cells as all-perovskite tandem solar cells (APTSCs). Perovskites have numerous advantages: (1) tunable optical bandgaps, (2) low-cost, e.g. via solution-processing, inexpensive precursors, and compatibility with many thin-film processing technologies, (3) scalability and lightweight, and (4) eco-friendliness related to low CO2 emission. However, APTSCs face challenges regarding stability caused by Sn2+ oxidation in narrow bandgap perovskites, low performance due to Voc deficit in the wide bandgap range, non-standardisation of charge recombination layers, and challenging thin-film deposition as each layer must be nearly perfectly homogenous. Here, we discuss the fundamentals of APTSCs and technological progress in constructing each layer of the all-perovskite stacks. Furthermore, the theoretical power conversion efficiency (PCE) limitation of APTSCs is discussed using simulations.Item Open Access Pure tin halide perovskite solar cells : focusing on preparation and strategies(2022) Liu, Hairui; Zhang, Zuhong; Zuo, Weiwei; Roy, Rajarshi; Li, Meng; Byranvand, Mahdi Malekshahi; Saliba, MichaelMetal halide perovskite solar cells (PSCs) have emerged as an important direction for photovoltaic research. Although the power conversion efficiency (PCE) of lead‐based PSCs has reached 25.7%, still the toxicity of Pb remains one main obstacle for commercial adoption. Thus, to address this issue, Pb‐free perovskites have been proposed. Among them, tin‐based perovskites have emerged as promising candidates. Unfortunately, the fast oxidation of Sn2+ to Sn4+ leads to low stability and efficiency. Many strategies have been implemented to address these challenges in Sn‐based PSCs. This work introduces stability and efficiency improvement strategies for pure Sn‐based PSCs by optimization of the crystal structure, processing and interfaces as well as, implementation of low‐dimension structures. Finally, new perspectives for further developing Sn‐based PSCs are provided.Item Open Access Ultra-uniform perovskite crystals formed in the presence of tetrabutylammonium bistriflimide afford efficient and stable perovskite solar cells(2024) Lim, Jaekeun; Rafieh, Alwani Imanah; Shibayama, Naoyuki; Xia, Jianxing; Audinot, Jean-Nicolas; Wirtz, Tom; Kinge, Sachin; Glunz, Stefan W.; Ding, Yong; Ding, Bin; Kim, Hobeom; Saliba, Michael; Fei, Zhaofu; Dyson, Paul J.; Nazeeruddin, Mohammad Khaja; Kanda, HiroyukiCompositional engineering of organic–inorganic metal halide perovskite allows for improved optoelectrical properties, however, phase segregation occurs during crystal nucleation and limits perovskite solar cell device performance. Herein, we show that by applying tetrabutylammonium bistriflimide as an additive in the perovskite precursor solution, ultra-uniform perovskite crystals are obtained, which effectively increases device performance. As a result, power conversion efficiencies (PCEs) of 24.5% in a cell and 21.2% in a module are achieved, together with high stability under illumination, humidity and elevated thermal conditions.Item Open Access Ultrathin polymeric films for interfacial passivation in wide band-gap perovskite solar cells(2020) Ferdowsi, Parnian; Ochoa-Martinez, Efrain; Alonso, Sandy Sanchez; Steiner, Ullrich; Saliba, MichaelWide band-gap perovskite solar cells have the potential for a relatively high output voltage and resilience in a degradation-inducing environment. Investigating the reasons why high voltages with adequate output power have not been realized yet is an underexplored part in perovskite research although it is of paramount interest for multijunction solar cells. One reason is interfacial carrier recombination that leads to reduced carrier lifetimes and voltage loss. To further improve the Voc of methylammonium lead tri-bromide (MAPbBr3), that has a band-gap of 2.3 eV, interface passivation technique is an important strategy. Here we demonstrate two ultrathin passivation layers consisting of PCBM and PMMA, that can effectively passivate defects at the TiO2/perovskite and perovskite/spiro-OMeTAD interfaces, respectively. In addition, perovskite crystallization was investigated with the established anti-solvent method and the novel flash infrared annealing (FIRA) with and without passivation layers. These modifications significantly suppress interfacial recombination providing a pathway for improved VOC’s from 1.27 to 1.41 V using anti solvent and from 1.12 to 1.36 V using FIRA. Furthermore, we obtained more stable devices through passivation after 140 h where the device retained 70% of the initial performance value.Item Open Access High‐stable lead‐free solar cells achieved by surface reconstruction of quasi‐2D tin‐based perovskites(2023) Yang, Feng; Zhu, Rui; Zhang, Zuhong; Su, Zhenhuang; Zuo, Weiwei; He, Bingchen; Aldamasy, Mahmoud Hussein; Jia, Yu; Li, Guixiang; Gao, Xingyu; Li, Zhe; Saliba, Michael; Abate, Antonio; Li, MengTin halide perovskites are an appealing alternative to lead perovskites. However, owing to the lower redox potential of Sn(II)/Sn(IV), particularly under the presence of oxygen and water, the accumulation of Sn(IV) at the surface layer will negatively impact the device's performance and stability. To this end, this work has introduced a novel multifunctional molecule, 1,4‐phenyldimethylammonium dibromide diamine (phDMADBr), to form a protective layer on the surface of Sn‐based perovskite films. Strong interactions between phDMADBr and the perovskite surface improve electron transfer, passivating uncoordinated Sn(II), and fortify against water and oxygen. In situ grazing incidence wide‐angle X‐ray scattering (GIWAXS) analysis confirms the enhanced thermal stability of the quasi‐2D phase, and hence the overall enhanced stability of the perovskite. Long‐term stability in devices is achieved, retaining over 90% of the original efficiency for more than 200 hours in a 10% RH moisture N2 environment. These findings propose a new approach to enhance the operational stability of Sn‐based perovskite devices, offering a strategy in advancing lead‐free optoelectronic applications.Item Open Access A universal strategy of perovskite ink‐substrate interaction to overcome the poor wettability of a self‐assembled monolayer for reproducible perovskite solar cells(2023) Kulkarni, Ashish; Sarkar, Ranjini; Akel, Samah; Häser, Maria; Klingebiel, Benjamin; Wuttig, Matthias; Wiegand, Simone; Chakraborty, Sudip; Saliba, Michael; Kirchartz, ThomasPerovskite solar cells employing [4-(3,6-dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid (Me-4PACz) self-assembled monolayer as the hole transport layer have been reported to demonstrate a high device efficiency. However, the poor perovskite wetting on Me-4PACz caused by poor perovskite ink interaction with the underlying Me-4PACz presents significant challenges for fabricating efficient perovskite devices. A triple co-solvent system comprising dimethylformamide (DMF), dimethyl sulfoxide (DMSO), and N-methyl-2-pyrrolidone (NMP) is employed to improve the perovskite ink-Me-4PACz coated substrate interaction and obtain a uniform perovskite layer. In comparison to DMF- and DMSO-based inks, the inclusion of NMP shows considerably higher binding energies of the perovskite ink with Me-4PACz as revealed by density-functional theory calculations. With the optimized triple co-solvent ratio, the perovskite devices deliver high power conversion efficiencies of >20%, 19.5%, and ≈18.5% for active areas of 0.16, 0.72, and 1.08 cm2, respectively. Importantly, this perovskite ink-substrate interaction approach is universal and helps in obtaining a uniform layer and high photovoltaic device performance for other perovskite compositions such as MAPbI3, FA1-xMAxPbI3-yBry, and MA-free FA1−xCsxPbI3-yBry.Item Open Access All-inorganic CsPbI2Br perovskite solar cells with thermal stability at 250 °C and moisture-resilience via polymeric protection layers(2025) Roy, Rajarshi; Byranvand, Mahdi Malekshahi; Zohdi, Mohamed Reza; Magorian Friedlmeier, Theresa; Das, Chittaranjan; Hempel, Wolfram; Zuo, Weiwei; Kedia, Mayank; Rendon, Jose Jeronimo; Boehringer, Stephan; Hailegnanw, Bekele; Vorochta, Michael; Mehl, Sascha; Rai, Monika; Kulkarni, Ashish; Mathur, Sanjay; Saliba, MichaelAll-inorganic perovskites, such as CsPbI2Br, have emerged as promising compositions due to their enhanced thermal stability. However, they face significant challenges due to their susceptibility to humidity. In this work, CsPbI2Br perovskite is treated with poly(3-hexylthiophen-2,5-diyl) (P3HT) during the crystallization resulting in significant stability improvements against thermal, moisture and steady-state operation stressors. The perovskite solar cell retains ∼90% of the initial efficiency under relative humidity (RH) at ∼60% for 30 min, which is among the most stable all-inorganic perovskite devices to date under such harsh conditions. Furthermore, the P3HT treatment ensures high thermal stress tolerance at 250 °C for over 5 h. In addition to the stability enhancements, the champion P3HT-treated device shows a higher power conversion efficiency (PCE) of 13.5% compared to 12.7% (reference) with the stabilized power output (SPO) for 300 s. In addition, the P3HT-protected perovskite layer in ambient conditions shows ∼75% of the initial efficiency compared to the unprotected devices with ∼28% of their initial efficiency after 7 days of shelf life.Item Open Access Mitigating the amorphization of perovskite layers by using atomic layer deposition of alumina(2025) Kedia, Mayank; Das, Chittaranjan; Kot, Malgorzata; Yalcinkaya, Yenal; Zuo, Weiwei; Tabah Tanko, Kenedy; Matvija, Peter; Ezquer, Mikel; Cornago, Iñaki; Hempel, Wolfram; Kauffmann, Florian; Plate, Paul; Lira-Cantu, Monica; Weber, Stefan A. L.; Saliba, MichaelAtomic layer deposition of aluminum oxide (ALD-Al2O3) layers has recently been studied for stabilizing perovskite solar cells (PSCs) against environmental stressors, such as humidity and oxygen. In addition, the ALD-Al2O3 layer acts as a protective barrier, mitigating pernicious halide ion migration from the perovskite towards the hole transport interface. However, its effectiveness in preventing the infiltration of ions and additives from the hole-transport layer into perovskites remains insufficiently understood. Herein, we demonstrate the deposition of a compact ultrathin (∼0.75 nm) ALD-Al2O3 layer that conformally coats the morphology of a triple-cation perovskite layer. This promotes an effective contact of the hole transporter layer on top of the perovskite, thereby improving the charge carrier collection between these two layers. Upon systematically investigating the layer-by-layer structure of the PSC, we discovered that ALD-Al2O3 also acts as a diffusion barrier for the degraded species from the adjacent transport layer into the perovskite. In addition to these protective considerations, ALD-Al2O3 impedes the transition of crystalline perovskites to an undesired amorphous phase. Consequently, the dual functionality (i.e., enhanced contact and diffusion barrier) of the ALD-Al2O3 protection enhanced the device performance from 19.1% to 20.5%, while retaining 98% of its initial performance compared to <10% for pristine devices after 1500 h of outdoor testing under ambient conditions. Finally, this study deepens our understanding of the mechanism of ALD-Al2O3 as a two-way diffusion barrier, highlighting the multifaceted role of buffer layers in interfacial engineering for the long-term stability of PSCs.