06 Fakultät Luft- und Raumfahrttechnik und Geodäsie

Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/7

Browse

Filters

20031

Settings

Institute: search.filters.UBSInstitut.Institut für NavigationPublication Type: search.filters.UBSTyp.Abschlussarbeit (Diplom)

Search Results

Now showing 1 - 1 of 1
  • Thumbnail Image
    ItemOpen Access
    Setting-up of GPS reference stations and investigating the effects of antenna radome
    (2003) Ogonda, Godfrey Onyango
    With the shutting down of Selective Availability (S/A) in year 2000 , accuracies as better as 5 to 9 metres in the horizontal and 8 to 9 metres in the vertical have been guaranteed in GPS positioning using code measurements in Single Point Positioning (SPP) mode. Although the accuracies attainable through unassisted SPP are sufficient for most applications such as navigation, GIS and recreation, a whole range of experience has shown that millimetre accuracies can be attained through performance of GPS surveys using enhanced satellite systems, improved equipment and streamlined field procedures. Such concepts include the tendency to use reference stations (i.e. relative Positioning) to generate DGPS corrections and maintenance of reference frames. The precisions and accuracies at which the reference stations are established and monitored are very high. All the possible sources of error to which the antennas and receivers at the site are susceptible to, must be identified and minimised or eliminated. This include Phase Centre Variation (PCV) and multipath. To protect the antennas from bad weather and vandalism, reference station antennas are usually covered. The PCV patterns are further complicated from the fact that addition of antenna covers (radomes) are known to have effects on the positions and the existence of several correction models. In this study, two reference stations were established and an investigation on the effect of conical radome on one of the reference stations was carried out. A baseline of about 5 metres was set-up on top of the building housing the Institute of Navigation on Breitscheid 2. At one end of the baseline was station 1, mounted with a choke ring antenna, and the other end station 2, mounted with a compact L1/L2 antenna. Twenty four hour GPS observations at a data rate of 2 seconds were carried out in six consecutive days. The antenna setting for every two days was the same. Part of the data files collected on day 1 was used to fix the positions of the two reference stations with respect to the SAPOS network. A further analysis was done with the six day data files to determine the effect of the radome and the radome mount plate on station 1. The solutions obtained show that the reference stations were successfully established and that the conical radome has a negligible effect of about 1.5 mm on the height component of station 1.