06 Fakultät Luft- und Raumfahrttechnik und Geodäsie
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/7
Browse
3 results
Search Results
Item Open Access Method of development of a new regional ionosphere model (RIM) to improve static single-frequency precise point positioning (SF-PPP) for Egypt using Bernese GNSS software(2023) Abdallah, Ashraf; Agag, Tarek; Schwieger, VolkerDue to the lack of coverage of IGS in Africa, especially over North Africa, and the construction revolution of infrastructure in Egypt, a geodetic CORS stations network was established in 2012. These CORS stations are operated by the Egyptian Surveying Authority (Egy. SA) and cover the whole of Egypt. The paper presents a fully developed regional ionosphere model (RIM) depending on the Egyptian CORS stations. The new model and the PPP solution were obtained using Bernese GNSS V. 5.2 software. An observation data series of eight days (DOY 201-208)/2019 was used in this study. Eighteen stations were used to develop the RIM model for each day; fifteen stations were used to validate the new RIM model. A static SF-PPP solution was obtained using the CODE-GIM and RIM models. Comparing the outcomes to the reference network solution, based on the recently developed RIM model, the solution showed a mean error of 0.06 m in the East direction, 0.13 m in the North direction, and 0.21 m in the height direction. In the East, North, and height directions, this solution improves the SF-PPP result achieved by the Global Ionosphere Maps (CODE-GIM) model by 60%, 68%, and 77%, respectively.Item Open Access Elementary error model applied to terrestrial laser scanning measurements: study case arch dam Kops(2020) Kerekes, Gabriel; Schwieger, VolkerAll measurements are affected by systematic and random deviations. A huge challenge is to correctly consider these effects on the results. Terrestrial laser scanners deliver point clouds that usually precede surface modeling. Therefore, stochastic information of the measured points directly influences the modeled surface quality. The elementary error model (EEM) is one method used to determine error sources impact on variances-covariance matrices (VCM). This approach assumes linear models and normal distributed deviations, despite the non-linear nature of the observations. It has been proven that in 90% of the cases, linearity can be assumed. In previous publications on the topic, EEM results were shown on simulated data sets while focusing on panorama laser scanners. Within this paper an application of the EEM is presented on a real object and a functional model is introduced for hybrid laser scanners. The focus is set on instrumental and atmospheric error sources. A different approach is used to classify the atmospheric parameters as stochastic correlating elementary errors, thus expanding the currently available EEM. Former approaches considered atmospheric parameters functional correlating elementary errors. Results highlight existing spatial correlations for varying scanner positions and different atmospheric conditions at the arch dam Kops in Austria.Item Open Access Estimating control points for B-spline surfaces using fully populated synthetic variance−covariance matrices for TLS point clouds(2021) Raschhofer, Jakob; Kerekes, Gabriel; Harmening, Corinna; Neuner, Hans; Schwieger, VolkerA flexible approach for geometric modelling of point clouds obtained from Terrestrial Laser Scanning (TLS) is by means of B-splines. These functions have gained some popularity in the engineering geodesy as they provide a suitable basis for a spatially continuous and parametric deformation analysis. In the predominant studies on geometric modelling of point clouds by B-splines, uncorrelated and equally weighted measurements are assumed. Trying to overcome this, the elementary errors theory is applied for establishing fully populated covariance matrices of TLS observations that consider correlations in the observed point clouds. In this article, a systematic approach for establishing realistic synthetic variance–covariance matrices (SVCMs) is presented and afterward used to model TLS point clouds by B-splines. Additionally, three criteria are selected to analyze the impact of different SVCMs on the functional and stochastic components of the estimation results. Plausible levels for variances and covariances are obtained using a test specimen of several dm—dimension. It is used to identify the most dominant elementary errors under laboratory conditions. Starting values for the variance level are obtained from a TLS calibration. The impact of SVCMs with different structures and different numeric values are comparatively investigated. Main findings of the paper are that for the analyzed object size and distances, the structure of the covariance matrix does not significantly affect the location of the estimated surface control points, but their precision in terms of the corresponding standard deviations. Regarding the latter, properly setting the main diagonal terms of the SVCM is of superordinate importance compared to setting the off-diagonal ones. The investigation of some individual errors revealed that the influence of their standard deviation on the precision of the estimated parameters is primarily dependent on the scanning distance. When the distance stays the same, one-sided influences on the precision of the estimated control points can be observed with an increase in the standard deviations.