02 Fakultät Bau- und Umweltingenieurwissenschaften
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/3
Browse
14 results
Search Results
Item Open Access Investigations into the opening of fractures during hydraulic testing using a hybrid-dimensional flow formulation(2021) Schmidt, Patrick; Steeb, Holger; Renner, JörgWe applied a hybrid-dimensional flow model to pressure transients recorded during pumping experiments conducted at the Reiche Zeche underground research laboratory to study the opening behavior of fractures due to fluid injection. Two distinct types of pressure responses to flow-rate steps were identified that represent radial-symmetric and plane-axisymmetric flow regimes from a conventional pressure-diffusion perspective. We numerically modeled both using a radial-symmetric flow formulation for a fracture that comprises a non-linear constitutive relation for the contact mechanics governing reversible fracture surface interaction. The two types of pressure response can be modeled equally well. A sensitivity study revealed a positive correlation between fracture length and normal fracture stiffness that yield a match between field observations and numerical results. Decomposition of the acting normal stresses into stresses associated with the deformation state of the global fracture geometry and with the local contacts indicates that geometrically induced stresses contribute the more the lower the total effective normal stress and the shorter the fracture. Separating the contributions of the local contact mechanics and the overall fracture geometry to fracture normal stiffness indicates that the geometrical stiffness constitutes a lower bound for total stiffness; its relevance increases with decreasing fracture length. Our study demonstrates that non-linear hydro-mechanical coupling can lead to vastly different hydraulic responses and thus provides an alternative to conventional pressure-diffusion analysis that requires changes in flow regime to cover the full range of observations.Item Open Access Spatiotemporal distribution of precipitates and mineral phase transition during biomineralization affect porosity-permeability relationships(2022) Weinhardt, Felix; Deng, Jingxuan; Hommel, Johannes; Vahid Dastjerdi, Samaneh; Gerlach, Robin; Steeb, Holger; Class, HolgerEnzymatically induced calcium carbonate precipitation is a promising geotechnique with the potential, for example, to seal leakage pathways in the subsurface or to stabilize soils. Precipitation of calcium carbonate in a porous medium reduces the porosity and, consequently, the permeability. With pseudo-2D microfluidic experiments, including pressure monitoring and, for visualization, optical microscopy and X-ray computed tomography, pore-space alterations were reliably related to corresponding hydraulic responses. The study comprises six experiments with two different pore structures, a simple, quasi-1D structure, and a 2D structure. Using a continuous injection strategy with either constant or step-wise reduced flow rates, we identified key mechanisms that significantly influence the relationship between porosity and permeability. In the quasi-1D structure, the location of precipitates is more relevant to the hydraulic response (pressure gradients) than the overall porosity change. In the quasi-2D structure, this is different, because flow can bypass locally clogged regions, thus leading to steadier porosity-permeability relationships. Moreover, in quasi-2D systems, during continuous injection, preferential flow paths can evolve and remain open. Classical porosity-permeability power-law relationships with constant exponents cannot adequately describe this phenomenon. We furthermore observed coexistence and transformation of different polymorphs of calcium carbonate, namely amorphous calcium carbonate, vaterite, and calcite and discuss their influence on the observed development of preferential flow paths. This has so far not been accounted for in the state-of-the-art approaches for porosity–permeability relationships during calcium carbonate precipitation in porous media.Item Open Access Parameter identification and validation of shape-memory polymers within the framework of finite strain viscoelasticity(2021) Ghobadi, Ehsan; Shutov, Alexey; Steeb, HolgerShape-Memory Polymers (SMPs) can be stretched to large deformations and recover induced strains when exposed to an appropriate stimulus, such as heat. This emerging class of functional polymers has attracted much interest and found applications in medicine and engineering. Nevertheless, prior to any application, their physical and mechanical properties must be thoroughly studied and understood in order to make predictions or to design structures thereof. In this contribution, the viscoelastic behavior of a polyether-based polyurethane (Estane) and its rate- and temperature-dependent behavior have been studied experimentally and by the mean of simulations. The model-inherent material parameters are identified with the assumption of the thermo-rheological complexity. Here, the numerical results of uni-axial stress relaxations were compared with the associated experiments in conjucation with the Levenberg-Marquard optimization method to determine the parameters of the Prony equation. The ability of the model to simulate the thermo-mechanical properties of Estane was evaluated by data-rich experimental observations on tension and torsion in various temperature ranges. Heterogeneous tests are included into the experimental program to cover a broader spectrum of loading scenarios.Item Open Access Diagnosing hydro-mechanical effects in subsurface fluid flow through fractures(2023) Schmidt, Patrick; Steeb, Holger; Renner, JörgHydro-mechanically induced transient changes in fracture volume elude an analysis of pressure and flow rate transients by conventional diffusion-based models. We used a previously developed fully coupled, inherently non-linear numerical simulation model to demonstrate that harmonic hydraulic excitation of fractures leads to systematic overtones in the response spectrum that can thus be used as a diagnostic criterion for hydro-mechanical interaction. The examination of response spectra, obtained from harmonic testing at four different field sites, for the occurrence of overtones confirmed their potential for the hydro-mechanical characterization of tested reservoirs. A non-dimensional analysis identified relative aperture change as the critical system parameter.Item Open Access Fractures in glaciers : crack tips and their stress fields by observation and modeling(2023) Humbert, Angelika; Gross, Dietmar; Sondershaus, Rabea; Müller, Ralf; Steeb, Holger; Braun, Matthias; Brauchle, Jörg; Stebner, Karsten; Rückamp, MartinHigh‐resolution optical camera systems are opening new opportunities to study fractures in ice. Here, we present data obtained from the Modular Aerial Camera System camera system operated onboard of Alfred Wegener Institute Helmholtz Centre for Polar and Marine Research (AWI) polar aircraft in northeast Greenland in 2022. In addition, we are using optical and radar satellite imagery. The study area is the 79°N Glacier (Nioghalvfjerdsbræ, 79NG), an outlet glacier of the Northeast Greenland Ice Stream. We found that crack tips are exhibiting additional isolated cracks ahead of the main crack. Subsequent crack propagation is starting from those isolated cracks, leading to an advance of the crack, with bridges between crack faces. The bridges provide information of the episodic crack propagation. Fractures have typically a length scale of kilometers and the distance of crack faces is in the order of meters to tenths of meters. Fracture modes will be inferred from stress fields computed by an inverse modeling approach using the Ice Sheet and Sea Level System Model. To this end, a surface velocity field derived from satellite remote sensing is used for the optimal control method that constrains model parameters, for example, basal friction coefficient or rheology.Item Open Access Experimental evaluation of fluid connectivity in two‐phase flow in porous media during drainage(2022) Vahid Dastjerdi, Samaneh; Karadimitriou, Nikolaos; Hassanizadeh, S. Majid; Steeb, HolgerThis study aims to experimentally investigate the possibility of combining two extended continuum theories for two‐phase flow. One of these theories considers interfacial area as a separate state variable, and the other explicitly discriminates between connected and disconnected phases. This combination enhances our potential to effectively model the apparent hysteresis, which generally dominates two‐phase flow. Using optical microscopy, we perform microfluidic experiments in quasi‐2D artificial porous media for various cyclic displacement processes and boundary conditions. Specifically for a number of sequential drainage processes, with detailed image (post‐)processing, pore‐scale parameters such as the interfacial area between the phases (wetting, non‐wetting, and solid), and local capillary pressure, as well as macroscopic parameters like saturation, are estimated. We show that discriminating between connected and disconnected clusters and the concept of the interfacial area as a separate state variable can be an appropriate way of modeling hysteresis in a two‐phase flow scheme. The drainage datasets of capillary pressure, saturation, and specific interfacial area, are plotted as a surface, given by f (Pc, sw, awn) = 0. These surfaces accommodate all data points within a reasonable experimental error, irrespective of the boundary conditions, as long as the corresponding liquid is connected to its inlet. However, this concept also shows signs of reduced efficiency as a modeling approach in datasets gathered through combining experiments with higher volumetric fluxes. We attribute this observation to the effect of the porous medium geometry on the phase distribution. This yields further elaboration, in which this speculation is thoroughly studied and analyzed.Item Open Access Optimal exposure time in gamma-ray attenuation experiments for monitoring time-dependent densities(2022) Gonzalez-Nicolas, Ana; Bilgic, Deborah; Kröker, Ilja; Mayar, Assem; Trevisan, Luca; Steeb, Holger; Wieprecht, Silke; Nowak, WolfgangSeveral environmental phenomena require monitoring time-dependent densities in porous media, e.g., clogging of river sediments, mineral dissolution/precipitation, or variably-saturated multiphase flow. Gamma-ray attenuation (GRA) can monitor time-dependent densities without being destructive or invasive under laboratory conditions. GRA sends gamma rays through a material, where they are attenuated by photoelectric absorption and then recorded by a photon detector. The attenuated intensity of the emerging beam relates to the density of the traversed material via Beer-Lambert’s law. An important parameter for designing time-variable GRA is the exposure time, the time the detector takes to gather and count photons before converting the recorded intensity to a density. Large exposure times capture the time evolution poorly (temporal raster error, inaccurate temporal discretization), while small exposure times yield imprecise intensity values (noise-related error, i.e. small signal-to-noise ratio). Together, these two make up the total error of observing time-dependent densities by GRA. Our goal is to provide an optimization framework for time-dependent GRA experiments with respect to exposure time and other key parameters, thus facilitating neater experimental data for improved process understanding. Experimentalists set, or iterate over, several experimental input parameters (e.g., Beer-Lambert parameters) and expectations on the yet unknown dynamics (e.g., mean and amplitude of density and characteristic time of density changes). We model the yet unknown dynamics as a random Gaussian Process to derive expressions for expected errors prior to the experiment as a function of key experimental parameters. Based on this, we provide an optimization framework that allows finding the optimal (minimal-total-error) setup and demonstrate its application on synthetic experiments.Item Open Access Estimation of capillary‐associated NAPL‐water interfacial areas for unconsolidated porous media by kinetic interface sensitive (KIS) tracer method(2023) Tatomir, Alexandru; Gao, Huhao; Abdullah, Hiwa; Pötzl, Christopher; Karadimitriou, Nikolaos; Steeb, Holger; Licha, Tobias; Class, Holger; Helmig, Rainer; Sauter, MartinBy employing kinetic interface sensitive (KIS) tracers, we investigate three different types of glass‐bead materials and three natural porous media systems to quantitatively characterize the influence of the porous‐medium grain‐, pore‐size and texture on the specific capillary‐associated interfacial area (FIFA) between an organic liquid and water. By interpreting the breakthrough curves (BTCs) of the reaction product of the KIS tracer hydrolysis, we obtain a relation for the specific IFA and wetting phase saturation. The immiscible displacement process coupled with the reactive tracer transport across the fluid-fluid interface is simulated with a Darcy‐scale numerical model. Linear relations between the specific capillary‐associated FIFA and the inverse mean grain diameter can be established for measurements with glass beads and natural soils. We find that the grain size has minimal effect on the capillary‐associated FIFA for unconsolidated porous media formed by glass beads. Conversely, for unconsolidated porous media formed by natural soils, the capillary‐associated FIFA linearly increases with the inverse mean grain diameter, and it is much larger than that from glass beads. This indicates that the surface roughness and the irregular shape of the grains can cause the capillary‐associated FIFA to increase. The results are also compared with the data collected from literature, measured with high resolution microtomography and partitioning tracer methods. Our study considerably expands the applicability range of the KIS tracers and enhances the confidence in the robustness of the method.Item Open Access DLP 4D printing of multi‐responsive bilayered structures(2023) Mainik, Philipp; Hsu, Li‐Yun; Zimmer, Claudius W.; Fauser, Dominik; Steeb, Holger; Blasco, EvaAdvances in soft robotics strongly rely on the development and manufacturing of new responsive soft materials. In particular, light‐based 3D printing techniques, and especially, digital light processing (DLP), offer a versatile platform for the fast manufacturing of complex 3D/4D structures with a high spatial resolution. In this work, DLP all‐printed bilayered structures exhibiting reversible and multi‐responsive behavior are presented for the first time. For this purpose, liquid crystal elastomers (LCEs) are used as active layers and combined with a printable non‐responsive elastomer acting as a passive layer. Furthermore, selective light response is incorporated by embedding various organic dyes absorbing light at different regimes in the active layers. An in‐depth characterization of the single materials and printed bilayers demonstrates a reversible and selective response. Last, the versatility of the approach is shown by DLP printing a bilayered complex 3D structure consisting of four different materials (a passive and three different LCE active materials), which exhibit different actuation patterns when irradiated with different wavelengths of light.Item Open Access Benchmark simulations of dense suspensions flow using computational fluid dynamics(2022) Haustein, Martin A.; Eslami Pirharati, Mahmoud; Fataei, Shirin; Ivanov, Dimitri; Jara Heredia, Daniel; Kijanski, Nadine; Lowke, Dirk; Mechtcherine, Viktor; Rostan, Daniel; Schäfer, Thorsten; Schilde, Carsten; Steeb, Holger; Schwarze, RüdigerThe modeling of fresh concrete flow is still very challenging. Nevertheless, it is of highest relevance to simulate these industrially important materials with sufficient accuracy. Often, fresh concrete is assumed to show a Bingham-behavior. In numerical simulations, regularization must be used to prevent singularities. Two different regularization models, namely the 1) Bi-viscous, and 2) Bingham-Papanastasiou are investigated. Those models can be applied to complex flows with common simulation methods, such as the Finite Volume Method (FVM), Finite Element Method (FEM) and Smoothed Particle Hydrodynamics (SPH). Within the scope of this investigation, two common software packages from the field of FVM, namely Ansys Fluent and OpenFOAM, COMSOL Multiphysics (COMSOL) from FEM side, and HOOMD-blue.sph from the field of SPH are used to model a reference experiment and to evaluate the modeling quality. According to the results, a good agreement of data with respect to the velocity profiles for all software packages is achieved, but on the other side there are remarkable difficulties in the viscosity calculation especially in the shear- to plug-flow transition zone. Also, a minor influence of the regularization model on the velocity profile is observed.