02 Fakultät Bau- und Umweltingenieurwissenschaften
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/3
Browse
229 results
Search Results
Item Open Access Heat transport from atmosphere through the subsurface to drinking‐water supply pipes(2023) Nissler, Elisabeth; Scherrer, Samuel; Class, Holger; Müller, Tanja; Hermannspan, Mark; Osmancevic, Esad; Haslauer, ClausDrinking‐water quality in supply pipe networks can be negatively affected by high temperatures during hot summer months due to detrimental bacteria encountering ideal conditions for growth. Thus, water suppliers are interested in estimating the temperature in their distribution networks. We investigate both experimentally and by numerical simulation the heat and water transport from ground surface into the subsurface, (i.e., above drinking‐water pipes). We consider the meteorological forcing functions by a sophisticated approach to model the boundary conditions for the heat balance at the soil-atmosphere interface. From August to December 2020, soil temperatures and soil moisture were measured dependent on soil type, land‐use cover, and weather data at a pilot site, constructed specifically for this purpose at the University of Stuttgart with polyethylene and cast‐iron pipes installed under typical in situ conditions. We included this interface condition at the atmosphere-subsurface boundary into an integrated non‐isothermal, variably saturated (Richards') the numerical simulator DuMux 3. This allowed, after calibration, to match measured soil temperatures with ±2°C accuracy. The land‐use cover influenced the soil temperature in 1.5 m more than the soil material used for back‐filling the trench above the pipe.Item Open Access Magnetic resonance imaging of water content and flow processes in natural soils by pulse sequences with ultrashort detection(2021) Haber-Pohlmeier, Sabina; Caterina, David; Blümich, Bernhard; Pohlmeier, AndreasMagnetic resonance imaging is a valuable tool for three-dimensional mapping of soil water processes due to its sensitivity to the substance of interest: water. Since conventional gradient- or spin-echo based pulse sequences do not detect rapidly relaxing fractions of water in natural porous media with transverse relaxation times in the millisecond range, pulse sequences with ultrafast detection open a way out. In this work, we compare a spin-echo multislice pulse sequence with ultrashort (UTE) and zero-TE (ZTE) sequences for their suitability to map water content and its changes in 3D in natural soil materials. Longitudinal and transverse relaxation times were found in the ranges around 80 ms and 1 to 50 ms, respectively, so that the spin echo sequence misses larger fractions of water. In contrast, ZTE and UTE could detect all water, if the excitation and detection bandwidths were set sufficiently broad. More precisely, with ZTE we could map water contents down to 0.1 cm3/cm3. Finally, we employed ZTE to monitor the development of film flow in a natural soil core with high temporal resolution. This opens the route for further quantitative imaging of soil water processes.Item Open Access Optimal design of experiments to improve the characterisation of atrazine degradation pathways in soil(2021) Chavez Rodriguez, Luciana; González‐Nicolás, Ana; Ingalls, Brian; Streck, Thilo; Nowak, Wolfgang; Xiao, Sinan; Pagel, HolgerContamination of soils with pesticides and their metabolites is a global environmental threat. Deciphering the complex process chains involved in pesticide degradation is a prerequisite for finding effective solution strategies. This study applies prospective optimal design (OD) of experiments to identify laboratory sampling strategies that allow model‐based discrimination of atrazine (AT) degradation pathways. We simulated virtual AT degradation experiments with a first‐order model that reflects a simple reaction chain of complete AT degradation. We added a set of Monod‐based model variants that consider more complex AT degradation pathways. Then, we applied an extended constraint‐based parameter search algorithm that produces Monte‐Carlo ensembles of realistic model outputs, in line with published experimental data. Differences between‐model ensembles were quantified with Bayesian model analysis using an energy distance metric. AT degradation pathways following first‐order reaction chains could be clearly distinguished from those predicted with Monod‐based models. As expected, including measurements of specific bacterial guilds improved model discrimination further. However, experimental designs considering measurements of AT metabolites were most informative, highlighting that environmental fate studies should prioritise measuring metabolites for elucidating active AT degradation pathways in soils. Our results suggest that applying model‐based prospective OD will maximise knowledge gains on soil systems from laboratory and field experiments.Item Open Access Impact of combined sewer systems on the quality of urban streams : frequency and duration of elevated micropollutant concentrations(2020) Dittmer, Ulrich; Bachmann-Machnik, Anna; Launay, Marie A.Water quality in urban streams is highly influenced by emissions from WWTP and from sewer systems particularly by overflows from combined systems. During storm events, this causes random fluctuations in discharge and pollutant concentrations over a wide range. The aim of this study is an appraisal of the environmental impact of micropollutant loads emitted from combined sewer systems. For this purpose, high-resolution time series of river concentrations were generated by combining a detailed calibrated model of a sewer system with measured discharge of a small natural river to a virtual urban catchment. This river base flow represents the remains of the natural hydrological system in the urban catchment. River concentrations downstream of the outlets are simulated based on mixing ratios of base flow, WWTP effluent, and CSO discharge. The results show that the standard method of time proportional sampling of rivers does not capture the risk of critical stress on aquatic organisms. The ratio between average and peak concentrations and the duration of elevated concentrations strongly depends on the source and the properties of the particular substance. The design of sampling campaigns and evaluation of data should consider these characteristics and account for their effects.Item Open Access Sustainability assessment of fuel cell buses in public transport(2018) Lozanovski, Aleksandar; Whitehouse, Nicole; Ko, Nathanael; Whitehouse, SimonHydrogen fuel cell (H2FC) buses operating in every day public transport services around Europe are assessed for their sustainability against environmental, economic and social criteria. As part of this assessment the buses are evaluated against diesel buses both in terms of sustainability and in terms of meeting real world requirements with respect to operational performance. The study concludes that H2FC buses meet operability and performance criteria and are sustainable environmentally when ‘green’ hydrogen is used. The economic sustainability of the buses, in terms of affordability, achieves parity with their fossil fuel equivalent by 2030 when the indirect costs to human health and climate change are included. Societal acceptance by those who worked with and used the buses supports the positive findings of earlier studies, although satisfactory operability and performance are shown to be essential to positive attitudes. Influential policy makers expressed positive sentiments only if ‘green’ hydrogen is used and the affordability issues can be addressed. No “show-stopper” is identified that would prevent future generations from using H2FC buses in public transport on a broad scale due to damage to the environment or to other factors that impinge on quality of life.Item Open Access Finite element based design of timber structures(2023) Töpler, Janusch; Schweigler, Michael; Lemaître, Romain; Palma, Pedro; Schenk, Martin; Grönquist, Philippe; Tapia Camú, Cristóbal; Hochreiner, Georg; Kuhlmann, UlrikeItem Open Access Lateral torsional buckling of glulam beam-columns : axial compression and bending verification(2024) Töpler, Janusch; Kuhlmann, Ulrike; Schänzlin, JörgItem Open Access Design recommendations for concrete pryout capacity of headed steel studs and post-installed anchors(2023) Jebara, Khalil; Sharma, Akanshu; Ožbolt, JoškoCurrent formulas to assess the shear capacity of headed steel stud anchors and post-installed (PI) anchors in case of pryout failure (sometimes known as pull-rear failure) have been derived either based on the indirect-tension resistance model or are fully empirical based on push-out test results. In both cases, the predicted pryout capacity is clearly conservative and underestimates the true pryout capacity of anchorages, especially for stiff anchors with low embedment-to-diameter ratios (hef/d < 4.5). This paper proposes an empirical and a semi-empirical formula to predict the concrete pryout capacity of headed steel studs and PI anchors. They were derived based on an improved indirect-tension model which accounts for the stud diameter and the stud spacing in a group of anchors. Furthermore, a database of 214 monotonic shear tests from the literature, including own tests (push-off and horizontally shear tests), is reevaluated and compared to the provisions of EN1992-4. The scope of this assessment proposal includes single and group of headed steel studs and PI anchors attached to a stiff steel plate as well as shear connectors in composite structures without metal deck embedded in normal-weight concrete.Item Open Access Structural member stability verification in the new part 1‐1 of the second generation of Eurocode 3 : part 1: evolution of Eurocodes, background to partial factors, cross‐section classification and structural analysis(2020) Knobloch, Markus; Bureau, Alain; Kuhlmann, Ulrike; da Silva, Luís Simões; Snijder, Hubertus. H.; Taras, Andreas; Bours, Anna‐Lena; Jörg, FabianThis two‐part article gives an overview of the developments of the structural member verification in prEN 1993‐1‐1:2020 “Eurocode 3: Design of steel structures - part 1‐1: General rules and rules for buildings”, one of the second generation of Eurocodes. These developments were undertaken by Working Group 1 (WG1) of Subcommittee CEN/TC250/SC3 and by Project Team 1 (SC3.PT1) responsible for drafting the new version of EN 1993‐1‐1. In the past, WG1 collected many topics needing improvement, and the systematic review conducted every five years also yielded topics needing further development. Based on this, the current version of EN 1993‐1‐1 has been developed into a new draft version prEN 1993‐1‐1:2020 enhancing “ease of use”. The technical content of this new draft was laid down at the end of 2019. Many improvements to design rules have been established with respect to structural analysis, resistance of cross‐sections and stability of members. This two‐part article focuses on member stability design rules and deals with the basis for the calibration of partial factors, the introduction of more economic design rules for semi‐compact sections, methods for structural analysis in relation to the appropriate member stability design rules, new design rules for lateral torsional buckling plus other developments and innovations. This first part of the article primarily serves to explain the general background to the European Commission Mandate M/515 that led to the further evolution of the Eurocodes and to illustrate the developments in prEN1993‐1‐1:2020 that pertain to new material grades, partial factors, cross‐sectional classification and structural analysis. These form the necessary background to the changes to member buckling design rules, which are treated more specifically in the second part.Item Open Access Influence of weathering on pore size distribution of soft rocks(2022) Knopp, Julia; Steger, Hagen; Moormann, Christian; Blum, PhilippSoft rocks can weather and lose their structure within a short time due to drying out and rewetting. Thus they are very sensitive to weathering. Since these rocks are often found in the shallow subsurface, they are of great practical relevance in the foundation of constructions. The rock properties change during the weathering process. Particularly relevant is the softening of the material and the decrease of its mechanical properties, which are determined typically using mechanical laboratory or field tests. The objective of this study is to examine in more detail how the microstructure of rocks changes over the course of weathering, which results in a decrease in mechanical properties. Sulfate rocks of the Grabfeld-Formation in Stuttgart, Germany were investigated. Using XRD analyses it was revealed that initially a chemical weathering processes occurs whereby the rocks leach out, followed by a physical weathering process. Investigations with a mercury porosimeter showed that during chemical weathering the intraaggregate pore content greatly increases, whereas the proportion of interaggregate pores only slightly increases.