02 Fakultät Bau- und Umweltingenieurwissenschaften

Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/3

Browse

Filters

2016 - 201912020 - 20235

Settings

Institute: search.filters.UBSInstitut.Institut für Mechanik (Bauwesen)Subject: search.filters.subject.510

Search Results

Now showing 1 - 6 of 6
  • Thumbnail Image
    ItemOpen Access
  • Thumbnail Image
    ItemOpen Access
  • Thumbnail Image
    ItemOpen Access
    Multiscale modeling and stability analysis of soft active materials : from electro- and magneto-active elastomers to polymeric hydrogels
    (Stuttgart : Institute of Applied Mechanics, 2023) Polukhov, Elten; Keip, Marc-André (Prof. Dr.-Ing.)
    This work is dedicated to modeling and stability analysis of stimuli-responsive, soft active materials within a multiscale variational framework. In particular, composite electro- and magneto-active polymers and polymeric hydrogels are under consideration. When electro- and magneto-active polymers (EAP and MAP) are fabricated in the form of composites, they comprise at least two phases: a polymeric matrix and embedded electric or magnetic particles. As a result, the obtained composite is soft, highly stretchable, and fracture resistant like polymer and undergoes stimuli-induced deformation due to the interaction of particles. By designing the microstructure of EAP or MAP composites, a compressive or a tensile deformation can be induced under electric or magnetic fields, and also coupling response of the composite can be enhanced. Hence, these materials have found applications as sensors, actuators, energy harvesters, absorbers, and soft, programmable, smart devices in various areas of engineering. Similarly, polymeric hydrogels are also stimuli-responsive materials. They undergo large volumetric deformations due to the diffusion of a solvent into the polymer network of hydrogels. In this case, the obtained material shows the characteristic behavior of polymer and solvent. Therefore, these materials can also be considered in the form of composites to enhance the response further. Since hydrogels are biocompatible materials, they have found applications as contact lenses, wound dressings, drug encapsulators and carriers in bio-medicine, among other similar applications of electro- and magneto-active polymers. All above mentioned favorable features of these materials, as well as their application possibilities, make it necessary to develop mathematical models and numerical tools to simulate the response of them in order to design pertinent microstructures for particular applications as well as understand the observed complex patterns such as wrinkling, creasing, snapping, localization or pattern transformations, among others. These instabilities are often considered as failure points of materials. However, many recent works take advantage of instabilities for smart applications. Investigation of these instabilities and prediction of their onset and mode are some of the main goals of this work. In this sense, the thesis is organized into three main parts. The first part is devoted to the state of the art in the development, fabrication, and modeling of soft active materials as well as the continuum mechanical description of the magneto-electro-elasticity. The second part is dedicated to multiscale instabilities in electro- and magneto-active polymer composites within a minimization-type variational homogenization setting. This means that the highly heterogeneous problem is not resolved on one scale due to computational inefficiency but is replaced by an equivalent homogeneous problem. The effective response of the macroscopic homogeneous problem is determined by solving a microscopic representative volume element which includes all the geometrical and material non-linearities. To bridge these two scales, the Hill-Mandel macro-homogeneity condition is utilized. Within this framework, we investigate both macroscopic and microscopic instabilities. The former are important not only from a physical point of view but also from a computational point of view since the macroscopic stability (strong ellipticity) is necessary for the existence of minimizers at the macroscopic scale. Similarly, the investigation of the latter instabilities are also important to determine the pattern transformations at the microscale due to external action. Thereby the critical domain of homogenization is also determined for computation of accurate effective results. Both investigations are carried out for various composite microstructures and it is found that they play a crucial role in the response of the materials. Therefore, they must be considered for designing EAP and MAP composites as well as for providing reliable computations. The third part of the thesis is dedicated to polymeric hydrogels. Here, we develop a minimization-based homogenization framework to determine the response of transient periodic hydrogel systems. We demonstrate the prevailing size effect as a result of a transient microscopic problem, which has been investigated for various microstructures. Exploiting the elements of the proposed framework, we explore the material and structural instabilities in single and two-phase hydrogel systems. Here, we have observed complex experimentally observed and novel 2D pattern transformations such as diamond-plate patterns coupled with and without wrinkling of internal surfaces for perforated microstructures and 3D pattern transformations in thin reinforced hydrogel composites. The results indicate that the obtained patterns can be controlled by tuning the material and geometrical parameters of the composite.
  • Thumbnail Image
    ItemOpen Access
    Finite strain hyperelastic multiscale homogenization via projection, efficient sampling and concentric interpolation
    (Stuttgart : Institute of Applied Mechanics, 2021) Kunc, Oliver; Fritzen, Felix (Prof. Dr.-Ing. Dipl.-Math. techn.)
  • Thumbnail Image
    ItemOpen Access
    Simulation of flow in deformable fractures using a quasi-Newton based partitioned coupling approach
    (2022) Schmidt, Patrick; Jaust, Alexander; Steeb, Holger; Schulte, Miriam
    We introduce a partitioned coupling approach for iterative coupling of flow processes in deformable fractures embedded in a poro-elastic medium that is enhanced by interface quasi-Newton (IQN) methods. In this scope, a unique computational decomposition into a fracture flow and a poro-elastic domain is developed, where communication and numerical coupling of the individual solvers are realized by consulting the open-source library preCICE. The underlying physical problem is introduced by a brief derivation of the governing equations and interface conditions of fracture flow and poro-elastic domain followed by a detailed discussion of the partitioned coupling scheme. We evaluate the proposed implementation and undertake a convergence study to compare a classical interface quasi-Newton inverse least-squares (IQN-ILS) with the more advanced interface quasi-Newton inverse multi-vector Jacobian (IQN-IMVJ) method. These coupling approaches are verified for an academic test case before the generality of the proposed strategy is demonstrated by simulations of two complex fracture networks. In contrast to the development of specific solvers, we promote the simplicity and computational efficiency of the proposed partitioned coupling approach using preCICE and FEniCS for parallel computations of hydro-mechanical processes in complex, three-dimensional fracture networks.
  • Thumbnail Image
    ItemOpen Access
    Truncated nonsmooth Newton multigrid for phase-field brittle-fracture problems, with analysis
    (2023) Gräser, Carsten; Kienle, Daniel; Sander, Oliver
    We propose the truncated nonsmooth Newton multigrid method (TNNMG) as a solver for the spatial problems of the small-strain brittle-fracture phase-field equations. TNNMG is a nonsmooth multigrid method that can solve biconvex, block-separably nonsmooth minimization problems with linear time complexity. It exploits the variational structure inherent in the problem, and handles the pointwise irreversibility constraint on the damage variable directly, without regularization or the introduction of a local history field. In the paper we introduce the method and show how it can be applied to several established models of phase-field brittle fracture. We then prove convergence of the solver to a solution of the nonsmooth Euler-Lagrange equations of the spatial problem for any load and initial iterate. On the way, we show several crucial convexity and regularity properties of the models considered here. Numerical comparisons to an operator-splitting algorithm show a considerable speed increase, without loss of robustness.