02 Fakultät Bau- und Umweltingenieurwissenschaften
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/3
Browse
18 results
Search Results
Item Open Access Modeling of evaporation-driven multiple salt precipitation in porous media with a real field application(2020) Mejri, Emna; Helmig, Rainer; Bouhlila, RachidaSoil and groundwater salinization are very important environmental issues of global concern. They threaten mainly the arid and semiarid regions characterized by dry climate conditions and an increase of irrigation practices. Among these regions, the south of Tunisia is considered, on the one hand, to be a salt-affected zone facing a twofold problem: The scarcity of water resources and the degradation of their quality due to the overexploitation of the aquifers for irrigation needs. On the other hand, this Tunisian landform is the only adequate area for planting date palm trees which provide the country with the first and most important exportation product. In order to maintain the existence of these oases and develop the date production, a good understanding of the salinization problem threatening this region, and the ability to predict its distribution and evolution, should not be underestimated. The work presented in this paper deals with the Oasis of Segdoud in southern Tunisia, with the objective of modeling the evaporation-driven salt precipitation processes at the soil profile scale and under real climatic conditions. The model used is based on the one developed and presented in a previous work. In order to fulfil the real field conditions, a further extension of the geochemical system of the existing model was required. The precipitated salts considered in this work were halite (NaCl), gypsum (CaSO4) and thenardite (Na2SO4). The extended model reproduces very well the same tendencies of the physico-chemical processes of the natural system in terms of the spatio-temporal distribution and evolution of the evaporation and multiple-salt precipitation. It sheds new lights on the simulation of sequences of salt precipitation in arid regions. The simulation results provide an analysis of the influence of salt precipitation on hydrodynamic properties of the porous medium (porosity and permeability). Moreover, the sensitivity analysis done here reveals the influence of the water table level on the evaporation rate.Item Open Access Obstacles, interfacial forms, and turbulence : a numerical analysis of soil-water evaporation across different interfaces(2020) Coltman, Edward; Lipp, Melanie; Vescovini, Andrea; Helmig, RainerExchange processes between a turbulent free flow and a porous media flow are sensitive to the flow dynamics in both flow regimes, as well as to the interface that separates them. Resolving these complex exchange processes across irregular interfaces is key in understanding many natural and engineered systems. With soil-water evaporation as the natural application of interest, the coupled behavior and exchange between flow regimes are investigated numerically, considering a turbulent free flow as well as interfacial forms and obstacles. Interfacial forms and obstacles will alter the flow conditions at the interface, creating flow structures that either enhance or reduce exchange rates based on their velocity conditions and their mixing with the main flow. To evaluate how these interfacial forms change the exchange rates, interfacial conditions are isolated and investigated numerically. First, different flow speeds are compared for a flat surface. Second, a porous obstacle of varied height is introduced at the interface, and the effects the flow structures that develop have on the interface are analyzed. The flow parameters of this obstacle are then varied and the interfacial exchange rates investigated. Next, to evaluate the interaction of flow structures between obstacles, a second obstacle is introduced, separated by a varied distance. Finally, the shape of these obstacles is modified to create different wave forms. Each of these interfacial forms and obstacles is shown to create different flow structures adjacent to the surface which alter the mass, momentum, and energy conditions at the interface. These changes will enhance the exchange rate in locations where higher velocity gradients and more mixing with the main flow develop, but will reduce the exchange rate in locations where low velocity gradients and limited mixing with the main flow occur.Item Open Access An adaptive hybrid vertical equilibrium/full‐dimensional model for compositional multiphase flow(2022) Becker, Beatrix; Guo, Bo; Buntic, Ivan; Flemisch, Bernd; Helmig, RainerEfficient compositional models are required to simulate underground gas storage in porous formations where, for example, gas quality (such as purity) and loss of gas due to dissolution are of interest. We first extend the concept of vertical equilibrium (VE) to compositional flow, and derive a compositional VE model by vertical integration. Second, we present a hybrid model that couples the efficient compositional VE model to a compositional full‐dimensional model. Subdomains, where the compositional VE model is valid, are identified during simulation based on a VE criterion that compares the vertical profiles of relative permeability at equilibrium to the ones simulated by the full‐dimensional model. We demonstrate the applicability of the hybrid model by simulating hydrogen storage in a radially symmetric, heterogeneous porous aquifer. The hybrid model shows excellent adaptivity over space and time for different permeability values in the heterogeneous region, and compares well to the full‐dimensional model while being computationally efficient, resulting in a runtime of roughly one‐third of the full‐dimensional model. Based on the results, we assume that for larger simulation scales, the efficiency of this new model will increase even more.Item Open Access Modeling of two phase flow in a hydrophobic porous medium interacting with a hydrophilic structure(2022) Michalkowski, Cynthia; Weishaupt, Kilian; Schleper, Veronika; Helmig, RainerFluid flow through layered materials with different wetting behavior is observed in a wide range of applications in biological, environmental and technical systems. Therefore, it is necessary to understand the occuring transport mechanisms of the fluids at the interface between the layered constituents. Of special interest is the water transport in polymer electrolyte membrane fuel cells. Here, it is necessary to understand the transport mechanisms of water throughout the cell constituents especially on the cathode side, where the excess water has to be removed. This is crucial to choose optimal operating conditions and improve the overall cell performance. Pore-scale modeling of gas diffusion layers (GDLs) and gas distributor has been established as a favorable technique to investigate the ongoing processes. Investigating the interface between the hydrophobic porous GDL and the hydrophilic gas distributor, a particular challenge is the combination and interaction of the different material structures and wetting properties at the interface and its influence on the flow. In this paper, a modeling approach is presented which captures the influence of a hydrophilic domain on the flow in a hydrophobic porous domain at the interface between the two domains. A pore-network model is used as the basis of the developed concept which is extended to allow the modeling of mixed-wet interactions at the interface. The functionality of the model is demonstrated using basic example configurations with one and several interface pores and it is applied to a realistic GDL representation in contact with a channel-land structured gas distributor.Item Open Access Simulation and interpretation of multiphase processes in porous and fractured-porous media(1994) Helmig, Rainer; Kobus, Helmut; Braun, ChristofA numerical model concept for simulating multi phase flow processes is presented. The conceptual model involves the approximation of heterogeneous porous and fractured porous media, by application of one-, two- and threedimensional elements in space that can be combined arbitrarily in a single model. The mathematical formulation of multiphase flow is valid for both saturated and unsaturated regions, so that dynamic front propagation behaviour as well as different geology-related retention characteristics can be accounted for in the model. For every Finite Element model problems arise when capillary pressure effects can be neglected and the governing equations are of hyperbolic type. To overcome these difficulties, the differential equations were formulated in terms of pressure and saturation as primary variables. To provide an accurate representation of the resulting saturation-front velocities and to avoid numerical oscillations a modified Petrov-Galerkin method was employed. To verify the code, the Buckley-Leverett problem was solved, and together with an adaptive finite element algorithm excellent results were obtained.Item Open Access A new simulation framework for soil-root interaction, evaporation, root growth, and solute transport(2018) Koch, Timo; Heck, Katharina; Schröder, Natalie; Class, Holger; Helmig, RainerWe have developed a general model concept and a flexible software framework for the description of plant-scale soil-root interaction processes including the essential fluid mechanical processes in the vadose zone. The model was developed in the framework of non-isothermal, multiphase, multicomponent flow and transport in porous media. The software is an extension of the open-source porous media flow and transport simulator DuMux to embedded mixed-dimensional coupled schemes. Our coupling concept allows us to describe all processes in a strongly coupled form and adapt the complexity of the governing equations in favor of either accuracy or computational efficiency. We have developed the necessary numerical tools to solve the strongly coupled nonlinear partial differential equation systems that arise with a locally mass conservative numerical scheme even in the context of evolving root architectures. We demonstrate the model concept and its features, discussing a virtual hydraulic lift experiment including evaporation, root tracer uptake on a locally refined grid, the simultaneous simulation of root growth and root water uptake, and an irrigation scenario comparing different models for flow in unsaturated soil. We have analyzed the impact of evaporation from soil on the soil water distribution around a single plant’s root system. Moreover, we have shown that locally refined grids around the root system increase computational efficiency while maintaining accuracy. Finally, we demonstrate that the assumptions behind the Richards equation may be violated under certain conditions.Item Open Access Analysis of experimental and simulation data of evaporation‐driven isotopic fractionation in unsaturated porous media(2024) Schneider, Jana; Kiemle, Stefanie; Heck, Katharina; Rothfuss, Youri; Braud, Isabelle; Helmig, Rainer; Vanderborght, JanStable water isotopologs can add valuable information to the understanding of evaporation processes. The identification of the evaporation front from isotopolog concentration depth profiles under very dry soil conditions is of particular interest. We compared two different models that describe isotopolog transport in a drying unsaturated porous medium: SiSPAT‐Isotope and DuMu x . In DuMu x , the medium can dry out completely whereas in SiSPAT‐Isotope, drying is limited to the residual water saturation. We evaluated the impact of residual water saturation on simulated isotopic concentration. For a low residual water saturation, both models simulated similar isotopolog concentrations. For high residual water saturation, SiSPAT‐Isotope simulated considerably lower concentrations than DuMu x . This is attributed to the buffering of changes in isotopolog concentrations by the residual water in SiSPAT‐Isotope and an additional enrichment due to evaporation of residual water in DuMu x . Additionally, we present a comparison between high‐frequency experimental data and model simulations. We found that diffusive transport processes in the laminar boundary layer and in the dried‐out surface soil layer need to be represented correctly to reproduce the observed downward movement of the evaporation front and the associated peak of isotopolog enrichment. Artificially increasing the boundary layer thickness to reproduce a decrease in evaporation rate leads to incorrect simulation of the location of the evaporation front and isotopolog concentration profile.Item Open Access Two-phase flow dynamics at the interface between GDL and gas distributor channel using a pore-network model(2022) Michalkowski, Cynthia; Veyskarami, Maziar; Bringedal, Carina; Helmig, Rainer; Schleper, VeronikaFor improved operating conditions of a polymer electrolyte membrane (PEM) fuel cell, a sophisticated water management is crucial. Therefore, it is necessary to understand the transport mechanisms of water throughout the cell constituents especially on the cathode side, where the excess water has to be removed. Pore-scale modeling of diffusion layers and gas distributor has been established as a favorable technique to investigate the ongoing processes. Investigating the interface between the cathode layers, a particular challenge is the combination and interaction of the multi-phase flow in the porous material of the gas diffusion layer (GDL) with the free flow in the gas distributor channels. The formation, growth and detachment of water droplets on the hydrophobic, porous surface of the GDL have a major influence on the mass, momentum and energy exchange between the layers. A dynamic pore-network model is used to describe the flow through the porous GDL on the pore-scale. To capture the droplet occurrence and its influence on the flow, this dynamic two-phase pore-network model is extended to capture droplet formation and growth at the surface of the GDL as well as droplet detachment due to the gas flow in the gas distributor channels. In this article, the developed model is applied to single- and multi-tube systems to investigate the general drop behavior. These rather simple test-cases are compared to experimental and numerical data available in the literature. Finally, the model is applied to a GDL unit cell to analyze the interaction between two-phase flow through the GDL and drop formation at the interface between GDL and gas distributor channel.Item Open Access Estimation of capillary‐associated NAPL‐water interfacial areas for unconsolidated porous media by kinetic interface sensitive (KIS) tracer method(2023) Tatomir, Alexandru; Gao, Huhao; Abdullah, Hiwa; Pötzl, Christopher; Karadimitriou, Nikolaos; Steeb, Holger; Licha, Tobias; Class, Holger; Helmig, Rainer; Sauter, MartinBy employing kinetic interface sensitive (KIS) tracers, we investigate three different types of glass‐bead materials and three natural porous media systems to quantitatively characterize the influence of the porous‐medium grain‐, pore‐size and texture on the specific capillary‐associated interfacial area (FIFA) between an organic liquid and water. By interpreting the breakthrough curves (BTCs) of the reaction product of the KIS tracer hydrolysis, we obtain a relation for the specific IFA and wetting phase saturation. The immiscible displacement process coupled with the reactive tracer transport across the fluid-fluid interface is simulated with a Darcy‐scale numerical model. Linear relations between the specific capillary‐associated FIFA and the inverse mean grain diameter can be established for measurements with glass beads and natural soils. We find that the grain size has minimal effect on the capillary‐associated FIFA for unconsolidated porous media formed by glass beads. Conversely, for unconsolidated porous media formed by natural soils, the capillary‐associated FIFA linearly increases with the inverse mean grain diameter, and it is much larger than that from glass beads. This indicates that the surface roughness and the irregular shape of the grains can cause the capillary‐associated FIFA to increase. The results are also compared with the data collected from literature, measured with high resolution microtomography and partitioning tracer methods. Our study considerably expands the applicability range of the KIS tracers and enhances the confidence in the robustness of the method.Item Open Access Influence of radiation on evaporation rates : a numerical analysis(2020) Heck, Katharina; Coltman, Edward; Schneider, Jana; Helmig, RainerWe present a fully coupled soil‐atmosphere model that includes radiation in the energy balance of the coupling conditions between the two domains. The model is able to describe evaporation processes under the influence of turbulence, surface roughness, and soil heterogeneities and focuses specifically on the influence of radiation on the mass and energy transport across the soil‐atmosphere interface. It is shown that evaporation rates are clearly dominated by the diurnal cycle of solar irradiance. During Stage‐I evaporation maximum temperatures are regulated due to evaporative cooling, but after a transition into Stage‐II evaporation, temperatures rise tremendously. We compare two different soil types, a coarser, sandy soil and a finer, silty soil, and analyze evaporation rates, surface temperatures, and net radiation for three different wind conditions. The influence of surface undulations on radiation and evaporation is analyzed and shows that radiation can lead to different local drying patterns in the hills and the valleys of the porous medium, depending on the height of the undulations and on the direction of the Sun. At last a comparison of lysimeter measurement data to the numerical examples shows a good match for measured and calculated radiation values but evaporation rates are still overestimated in the model. Possible reasons for the discrepancy between measurement and model data are analyzed and are found to be uncertainties about the parameters close to the interface, which are decisive for determining evaporation rates.