02 Fakultät Bau- und Umweltingenieurwissenschaften
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/3
Browse
5 results
Search Results
Item Open Access Giraffes and hominins: reductionist model predictions of compressive loads at the spine base for erect exponents of the animal kingdom(2021) Günther, Michael; Mörl, FalkIn humans, compressive stress on intervertebral discs is commonly deployed as a measurand for assessing the loads that act within the spine. Examining this physical quantity is crucially beneficial: the intradiscal pressure can be directly measured in vivo in humans, and is immediately related to compressive stress. Hence, measured intradiscal pressure data are utterly useful for validating such biomechanical animal models that have the spine incorporated, and can, thus, compute compressive stress values. Here, we utilise human intradiscal pressure data to verify the predictions of a reductionist spine model, which has in fact only one joint degree of freedom. We calculate the pulling force of one lumped anatomical structure that acts past this (intervertebral) joint at the base of the spine - lumbar in hominins, cervical in giraffes - to compensate the torque that is induced by the weight of all masses located cranially to the base. Given morphometric estimates of the human and australopith trunks, respectively, and the giraffe's neck, as well as the respective structures' lever arms and disc areas, we predict, for all three species, the compressive stress on the intervertebral disc at the spine base, while systematically varying the angular orientation of the species' spinal columns with respect to gravity. The comparison between these species demonstrates that hominin everyday compressive disc stresses are lower than such in big quadrupedal animals. Within each species, erecting the spine from being bent forward by, for example, thirty degrees to fully upright posture reduces the compressive disc stress roughly to a third. We conclude that erecting the spine immediately allows to carry extra loads of the order of body weight, and yet the compressive disc stress is lower than in a moderately forward-bent posture with none extra load.Item Open Access Where have the dead gone?(2022) Günther, Michael; Mörl, Falk; Rockenfeller, RobertItem Open Access On laterally perturbed human stance: experiment, model, and control(2018) Suissa, Dan; Günther, Michael; Shapiro, Amir; Melzer, Itshak; Schmitt, SynItem Open Access Is the harm-to-benefit ratio a key criterion in vaccine approval?(2022) Mörl, Falk; Günther, Michael; Rockenfeller, RobertItem Open Access A geometry- and muscle-based control architecture for synthesising biological movement(2021) Walter, Johannes R.; Günther, Michael; Häufle, Daniel F. B.; Schmitt, SynA key problem for biological motor control is to establish a link between an idea of a movement and the generation of a set of muscle-stimulating signals that lead to the movement execution. The number of signals to generate is thereby larger than the body’s mechanical degrees of freedom in which the idea of the movement may be easily expressed, as the movement is actually executed in this space. A mathematical formulation that provides a solving link is presented in this paper in the form of a layered, hierarchical control architecture. It is meant to synthesise a wide range of complex three-dimensional muscle-driven movements. The control architecture consists of a ‘conceptional layer’, where the movement is planned, a ‘structural layer’, where the muscles are stimulated, and between both an additional ‘transformational layer’, where the muscle-joint redundancy is resolved. We demonstrate the operativeness by simulating human stance and squatting in a three-dimensional digital human model (DHM). The DHM considers 20 angular DoFs and 36 Hill-type muscle-tendon units (MTUs) and is exposed to gravity, while its feet contact the ground via reversible stick-slip interactions. The control architecture continuously stimulates all MTUs (‘structural layer’) based on a high-level, torque-based task formulation within its ‘conceptional layer’. Desired states of joint angles (postural plan) are fed to two mid-level joint controllers in the ‘transformational layer’. The ‘transformational layer’ communicates with the biophysical structures in the ‘structural layer’ by providing direct MTU stimulation contributions and further input signals for low-level MTU controllers. Thereby, the redundancy of the MTU stimulations with respect to the joint angles is resolved, i.e. a link between plan and execution is established, by exploiting some properties of the biophysical structures modelled. The resulting joint torques generated by the MTUs via their moment arms are fed back to the conceptional layer, closing the high-level control loop. Within our mathematical formulations of the Jacobian matrix-based layer transformations, we identify the crucial information for the redundancy solution to be the muscle moment arms, the stiffness relations of muscle and tendon tissue within the muscle model, and the length-stimulation relation of the muscle activation dynamics. The present control architecture allows the straightforward feeding of conceptional movement task formulations to MTUs. With this approach, the problem of movement planning is eased, as solely the mechanical system has to be considered in the conceptional plan.