07 Fakultät Konstruktions-, Produktions- und Fahrzeugtechnik
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/8
Browse
6 results
Search Results
Item Open Access A nonsmooth generalized‐alpha method for mechanical systems with frictional contact(2021) Capobianco, Giuseppe; Harsch, Jonas; Eugster, Simon R.; Leine, Remco I.In this article, the existing nonsmooth generalized‐α method for the simulation of mechanical systems with frictionless contacts, modeled as unilateral constraints, is extended to systems with frictional contacts. On that account, we complement the unilateral constraints with set‐valued Coulomb‐type friction laws. Moreover, we devise a set of benchmark systems, which can be used to validate numerical schemes for mechanical systems with frictional contacts. Finally, this set of benchmarks is used to numerically assert the properties striven for during the derivation of the presented scheme. Specifically, we show that the presented scheme can reproduce the dynamics of the frictional contact adequately and no numerical penetration of the contacting bodies arises - a big issue for most popular time‐stepping schemes such as the one of Moreau. Moreover, we demonstrate that the presented scheme performs well for multibody systems containing flexible parts and that it allows general parametrizations such as the use of unit quaternions for the rotation of rigid bodies.Item Open Access A family of total Lagrangian Petrov-Galerkin Cosserat rod finite element formulations(2023) Eugster, Simon R.; Harsch, JonasThe standard in rod finite element formulations is the Bubnov-Galerkin projection method, where the test functions arise from a consistent variation of the ansatz functions. This approach becomes increasingly complex when highly nonlinear ansatz functions are chosen to approximate the rod's centerline and cross-section orientations. Using a Petrov-Galerkin projection method, we propose a whole family of rod finite element formulations where the nodal generalized virtual displacements and generalized velocities are interpolated instead of using the consistent variations and time derivatives of the ansatz functions. This approach leads to a significant simplification of the expressions in the discrete virtual work functionals. In addition, independent strategies can be chosen for interpolating the nodal centerline points and cross-section orientations. We discuss three objective interpolation strategies and give an in-depth analysis concerning locking and convergence behavior for the whole family of rod finite element formulations.Item Open Access Finite element formulations for constrained spatial nonlinear beam theories(2021) Harsch, Jonas; Capobianco, Giuseppe; Eugster, Simon R.A new director-based finite element formulation for geometrically exact beams is proposed by weak enforcement of the orthonormality constraints of the directors. In addition to an improved numerical performance, this formulation enables the development of two more beam theories by adding further constraints. Thus, the paper presents a complete intrinsic spatial nonlinear theory of three kinematically different beams which can undergo large displacements and which can have precurved reference configurations. Moreover, the hyperelastic constitutive laws allow for elastic finite strain material behavior of the beams. Furthermore, the numerical discretization using concepts of isogeometric analysis is highlighted in all clarity. Finally, all presented models are numerically validated using exclusive analytical solutions, existing finite element formulations, and a complex dynamical real-world example.Item Open Access Nonunit quaternion parametrization of a Petrov-Galerkin Cosserat rod finite element(2023) Harsch, Jonas; Eugster, Simon R.The application of the Petrov-Galerkin projection method in Cosserat rod finite element formulations offers significant advantages in simplifying the expressions within the discrete virtual work functionals. Moreover, it enables a straight‐forward and systematic exchange of the ansatz functions, specifically for centerline positions and cross‐section orientations. In this concise communication, we present a total Lagrangian finite element formulation for Cosserat rods that attempts to minimize the number of required theoretical concepts. The chosen discretization preserves objectivity and allows for large displacements/rotations and for large strains. The orientation parametrization with nonunit quaternions results in a singularity‐free formulation.Item Open Access A total Lagrangian, objective and intrinsically locking‐free Petrov-Galerkin SE(3) Cosserat rod finite element formulation(2023) Harsch, Jonas; Sailer, Simon; Eugster, Simon R.Based on more than three decades of rod finite element theory, this publication combines the successful contributions found in the literature and eradicates the arising drawbacks like loss of objectivity, locking, path-dependence and redundant coordinates. Specifically, the idea of interpolating the nodal orientations using relative rotation vectors, proposed by Crisfield and Jelenić in 1999, is extended to the interpolation of nodal Euclidean transformation matrices with the aid of relative twists; a strategy that arises from the SE(3)-structure of the Cosserat rod kinematics. Applying a Petrov-Galerkin projection method, we propose a rod finite element formulation where the virtual displacements and rotations as well as the translational and angular velocities are interpolated instead of using the consistent variations and time-derivatives of the introduced interpolation formula. Properties such as the intrinsic absence of locking, preservation of objectivity after discretization and parameterization in terms of a minimal number of nodal unknowns are demonstrated by representative numerical examples in both statics and dynamics.Item Open Access Experimental analysis, discrete modeling and parameter optimization of SLS-printed bi-pantographic structures(2022) Harsch, Jonas; Ganzosch, Gregor; Barchiesi, Emilio; Ciallella, Alessandro; Eugster, Simon R.Making use of experimental data for bias extension, shearing, and point-load tests in large deformation regime for rectangular and square bi-pantographic specimens, we perform a numerical identification to fit the a priori parameters of a planar discrete spring model. The main objective of the work is to develop an automatized optimization process based on the Nelder-Mead simplex algorithm for identifying the constitutive parameters of discrete modeling of bi-pantographic structures, as well as assessing its descriptiveness and predictive capacity. The analysis allows to conclude that there exists a single set of parameters for the adopted discrete modeling such that it is descriptive and predictive for several different tests and for a wide range of deformations.