Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
34 results
Search Results
Item Open Access A Bayesian network approach to assess and predict software quality using activity-based quality models(2009) Wagner, StefanAssessing and predicting the complex concept of software quality is still challenging in practice as well as research. Activity-based quality models break down this complex concept into more concrete definitions, more precisely facts about the system, process and environment and their impact on activities performed on and with the system. However, these models lack an operationalisation that allows to use them in assessment and prediction of quality. Bayesian Networks (BN) have been shown to be a viable means for assessment and prediction incorporating variables with uncertainty. This paper describes how activity-based quality models can be used to derive BN models for quality assessment and prediction. The proposed approach is demonstrated in a proof of concept using publicly available data.Item Open Access Empirical research plan: effects of sketching on program comprehension(2016) Baltes, Sebastian; Wagner, StefanSketching is an important means of communication in software engineering practice. Yet, there is little research investigating the use of sketches. We want to contribute a better understanding of sketching, in particular its use during program comprehension. We propose a controlled experiment to investigate the effectiveness and efficiency of program comprehension with the support of sketches as well as what sketches are used in what way.Item Open Access A comprehensive safety engineering approach for software-intensive systems based on STPA(2015) Abdulkhaleq, Asim; Wagner, Stefan; Leveson, NancyFormal verification and testing are complementary approaches which are used in the development process to verify the functional correctness of software. However, the correctness of software cannot ensure the safe operation of safety-critical software systems. The software must be verified against its safety requirements which are identified by safety analysis, to ensure that potential hazardous causes cannot occur. The complexity of software makes defining appropriate software safety requirements with traditional safety analysis techniques difficult. STPA (Systems-Theoretic Processes Analysis) is a unique safety analysis approach that has been developed to identify system hazards, including the software-related hazards. This paper presents a comprehensive safety engineering approach based on STPA, including software testing and model checking approaches for the purpose of developing safe software. The proposed approach can be embedded within a defined software engineering process or applied to existing software systems, allow software and safety engineers integrate the analysis of software risks with their verification. The application of the proposed approach is illustrated with an automotive software controller.Item Open Access Do code clones matter?(2009) Juergens, Elmar; Deißenböck, Florian; Hummel, Benjamin; Wagner, StefanCode cloning is not only assumed to inflate maintenance costs but also considered defect-prone as inconsistent changes to code duplicates can lead to unexpected behavior. Consequently, the identification of duplicated code, clone detection, has been a very active area of research in recent years. Up to now, however, no substantial investigation of the consequences of code cloning on program correctness has been carried out. To remedy this shortcoming, this paper presents the results of a large-scale case study that was undertaken to find out if inconsistent changes to cloned code can indicate faults. For the analyzed commercial and open source systems we not only found that inconsistent changes to clones are very frequent but also identified a significant number of faults induced by such changes. The clone detection tool used in the case study implements a novel algorithm for the detection of inconsistent clones. It is available as open source to enable other researchers to use it as basis for further investigations.Item Open Access Modelling the quality economics of defect-detection techniques(2006) Wagner, StefanThere are various ways to evaluate defect-detection techniques. However, for a comprehensive evaluation the only possibility is to reduce all influencing factors to costs. There are already some models and metrics for the cost of quality that can be used in that context. These models allow the structuring of the costs but do not show all influencing factors and their relationships. This paper proposes an analytical model for the economics of defect-detection techniques that can be used for analysis and optimisation of the usage of such techniques. In particular we analyse the sensitivity of the model and how the model can be applied in practice.Item Open Access Software quality models : purposes, usage scenarios and requirements(2009) Deißenböck, Florian; Juergens, Elmar; Lochmann, Klaus; Wagner, StefanSoftware quality models are a well-accepted means to support quality management of software systems. Over the last 30 years, a multitude of quality models have been proposed and applied with varying degrees of success. Despite successes and standardisation efforts, quality models are still being criticised, as their application in practice exhibits various problems. To some extent, this criticism is caused by an unclear definition of what quality models are and which purposes they serve. Beyond this, there is a lack of explicitly stated requirements for quality models with respect to their intended mode of application. To remedy this, this paper describes purposes and usage scenarios of quality models and, based on the literature and experiences from the authors, collects critique of existing models. From this, general requirements for quality models are derived. The requirements can be used to support the evaluation of existing quality models for a given context or to guide further quality model development.Item Open Access On the impact of service-oriented patterns on software evolvability: a controlled experiment and metric-based analysis(2019) Bogner, Justus; Wagner, Stefan; Zimmermann, AlfredBackground: Design patterns are supposed to improve various quality attributes of software systems. However, there is controversial quantitative evidence of this impact. Especially for younger paradigms such as service- and Microservice-based systems, there is a lack of empirical studies. Objective: In this study, we focused on the effect of four service-based patterns - namely Process Abstraction, Service Façade, Decomposed Capability, and Event-Driven Messaging - on the evolvability of a system from the viewpoint of inexperienced developers. Method: We conducted a controlled experiment with Bachelor students (N = 69). Two functionally equivalent versions of a service-based web shop - one with patterns (treatment group), one without (control group) - had to be changed and extended in three tasks. We measured evolvability by the effectiveness and efficiency of the participants in these tasks. Additionally, we compared both system versions with nine structural maintainability metrics for size, granularity, complexity, cohesion, and coupling. Results: Both experiment groups were able to complete a similar number of tasks within the allowed 90 min. Median effectiveness was 1/3. Mean efficiency was 12% higher in the treatment group, but this difference was not statistically significant. Only for the third task, we found statistical support for accepting the alternative hypothesis that the pattern version led to higher efficiency. In the metric analysis, the pattern version had worse measurements for size and granularity while simultaneously having slightly better values for coupling metrics. Complexity and cohesion were not impacted. Interpretation: For the experiment, our analysis suggests that the difference in efficiency is stronger with more experienced participants and increased from task to task. With respect to the metrics, the patterns introduce additional volume in the system, but also seem to decrease coupling in some areas. Conclusions: Overall, there was no clear evidence for a decisive positive effect of using service-based patterns, neither for the student experiment nor for the metric analysis. This effect might only be visible in an experiment setting with higher initial effort to understand the system or with more experienced developers.Item Open Access A model and sensitivity analysis of the quality economics of defect-detection techniques(2006) Wagner, StefanOne of the main cost factors in software development is the detection and removal of defects. However, the relationships and influencing factors of the costs and revenues of defect-detection techniques are still not well understood. This paper proposes an analytical, stochastic model of the economics of defect detection and removal to improve this understanding. The model is able to incorporate dynamic as well as static techniques in contrast to most other models of that kind. We especially analyse the model with state-ofthe-art sensitivity analysis methods to (1) identify the most relevant factors for model simplification and (2) prioritise the factors to guide further research and measurements.Item Open Access The Quamoco product quality modelling and assessment approach(2012) Wagner, Stefan; Lochmann, Klaus; Heinemann, Lars; Kläs, Michael; Trendowicz, Adam; Plösch, Reinhold; Seidl, Andreas; Goeb, Andreas; Streit, JonathanPublished software quality models either provide abstract quality attributes or concrete quality assessments. There are no models that seamlessly integrate both aspects. In the project Quamoco, we built a comprehensive approach with the aim to close this gap. For this, we developed in several iterations a meta quality model specifying general concepts, a quality base model covering the most important quality factors and a quality assessment approach. The meta model introduces the new concept of a product factor, which bridges the gap between concrete measurements and abstract quality aspects. Product factors have measures and instruments to operationalise quality by measurements from manual inspection and tool analysis. The base model uses the ISO 25010 quality attributes, which we refine by 200 factors and 600 measures for Java and C# systems. We found in several empirical validations that the assessment results fit to the expectations of experts for the corresponding systems. The empirical analyses also showed that several of the correlations are statistically significant and that the maintainability part of the base model has the highest correlation, which fits to the fact that this part is the most comprehensive. Although we still see room for extending and improving the base model, it shows a high correspondence with expert opinions and hence is able to form the basis for repeatable and understandable quality assessments in practice.Item Open Access An empirical study on changing leadership in agile teams(2021) Spiegler, Simone V.; Heinecke, Christoph; Wagner, StefanAn increasing number of companies aim to enable their development teams to work in an agile manner. When introducing agile teams, companies face several challenges. This paper explores the kind of leadership needed to support teams to work in an agile way. One theoretical agile leadership concept describes a Scrum Master who is supposed to empower the team to lead itself. Empirical findings on such a leadership role are controversial. We still have not understood how leadership unfolds in a team that is by definition self-organizing. Further exploration is needed to better understand leadership in agile teams. Our goal is to explore how leadership changes while the team matures using the example of the Scrum Master. Through a grounded theory study containing 75 practitioners from 11 divisions at the Robert Bosch GmbH we identified a set of nine leadership roles that are transferred from the Scrum Master to the Development Team while it matures. We uncovered that a leadership gap and a supportive internal team climate are enablers of the role transfer process, whereas role conflicts may diminish the role transfer. To make the Scrum Master change in a mature team, team members need to receive trust and freedom to take on a leadership role which was previously filled by the Scrum Master. We conclude with practical implications for managers, Product Owners, Development Teams and Scrum Masters which they can apply in real settings.