Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
310 results
Search Results
Item Open Access Investigating superconductivity by tunneling spectroscopy using oxide heterostructures(2017) Fillis-Tsirakis, Evangelos; Mannhart, Jochen (Prof. Dr.)Item Open Access Designing covalent organic framework‐based light‐driven microswimmers toward therapeutic applications(2023) Sridhar, Varun; Yildiz, Erdost; Rodríguez‐Camargo, Andrés; Lyu, Xianglong; Yao, Liang; Wrede, Paul; Aghakhani, Amirreza; Akolpoglu, Birgul M.; Podjaski, Filip; Lotsch, Bettina V.; Sitti, MetinWhile micromachines with tailored functionalities enable therapeutic applications in biological environments, their controlled motion and targeted drug delivery in biological media require sophisticated designs for practical applications. Covalent organic frameworks (COFs), a new generation of crystalline and nanoporous polymers, offer new perspectives for light‐driven microswimmers in heterogeneous biological environments including intraocular fluids, thus setting the stage for biomedical applications such as retinal drug delivery. Two different types of COFs, uniformly spherical TABP‐PDA‐COF sub‐micrometer particles and texturally nanoporous, micrometer‐sized TpAzo‐COF particles are described and compared as light‐driven microrobots. They can be used as highly efficient visible‐light‐driven drug carriers in aqueous ionic and cellular media. Their absorption ranging down to red light enables phototaxis even in deeper and viscous biological media, while the organic nature of COFs ensures their biocompatibility. Their inherently porous structures with ≈2.6 and ≈3.4 nm pores, and large surface areas allow for targeted and efficient drug loading even for insoluble drugs, which can be released on demand. Additionally, indocyanine green (ICG) dye loading in the pores enables photoacoustic imaging, optical coherence tomography, and hyperthermia in operando conditions. This real‐time visualization of the drug‐loaded COF microswimmers enables unique insights into the action of photoactive porous drug carriers for therapeutic applications.Item Open Access Interphases between alkali metals (Li, Na) and battery electrolytes : ion transport and growth behavior(2022) Lim, Kyungmi; Maier, Joachim (Prof. Dr.)Item Open Access Exploring the growth of refractory metal and sapphire films by thermal laser epitaxy(2024) Majer, Lena N.; Mannhart, Jochen (Prof. Dr.)Item Open Access Confirmation of siderazot, Fe3N1.33, the only terrestrial nitride mineral(2021) Bette, Sebastian; Theye, Thomas; Bernhardt, Heinz-Jürgen; Clark, William P.; Niewa, RainerSiderazot, the only terrestrial nitride mineral, was reported only once in 1876 to occur as coating on volcanic rocks in a fumarolic environment from Mt. Etna and, to date, has been neither confirmed nor structurally characterized. We have studied the holotype sample from the Natural History Museum, London, UK, originally collected by O. Silvestri in 1874, and present siderazot with epsilon-Fe3N-type crystal structure and composition of Fe3N1.33(7) according to crystal structure Rietveld refinements, in good agreement with electron microprobe analyses. Crystal structure data, chemical composition, and Raman and reflectance measurements are reported. Possible formation conditions are derived from composition and phase stability data according to synthetic samples.Item Open Access From Hermitian to non-Hermitian topological phases of matter(2019) Rui, Wenbin; Metzner, Walter (Prof. Dr.)The focus of this thesis lies on extending the theory of topological phases of matter from the Hermitian to the non-Hermitian regime. This includes not only the extension of conventional concepts such as topological invariants and topological boundary states in the theory of Hermitian topological phases, but also the exploration and characterization of entirely new topological phases unique to non-Hermitian systems.Item Open Access Structure and electronic properties of epitaxial monolayer WSe2(2019) Mohammed, Avaise; Takagi, Hidenori (Prof. Dr.)Item Open Access Polarized neutron reflectometry study of complex magnetism and hydrogen incorporation in thin-film structures(2022) Guasco, Laura; Keimer, Bernhard (Prof. Dr.)In this thesis, we present the study of the structural and magnetic properties of simple metals and complex oxide thin films by means of polarized neutron reflectometry. The nuclear and electronic properties of thin films were modified via two routes, namely via hydrogen incorporation, in the case of niobium systems and complex oxide layers, and via depth modulated hole doping, in the case of manganite heterostructures.Item Open Access Elektrische und magnetische Eigenschaften metallreicher Seltenerdmetallhalogenide(2004) Ryazanov, Mikhail; Simon Arndt (Prof. Dr.)Im Rahmen dieser Arbeit wurden metallreiche Seltenerdmetallhalogenide unterschiedlicher Valenzelektronenkonzentration dargestellt und ihre physikalischen Eigenschaften untersucht. Dafür wurde sowohl der Weg des Einbaus von Interstitialwasserstoffatomen in die Kristallstruktur als auch die Möglichkeit der Kationen- bzw. Anionensubstitution beschritten. Es wurden Hydridiodide und ternaere Iodidtelluride von Y, La und Gd synthetisiert und charakterisiert. Magnetische und elektrische Messungen weisen auf eine erhebliche Änderung der physikalischen Eigenschaften in Abhängigkeit vom Wasserstoffgehalt hin. Es wurden verschiedene auffallende Effekte, wie z.B. Kolossal-Magnetwiderstand sowie auch Spinclusterglas-Verhalten, beobachtet.Item Open Access Polymer electrolyte membrane degradation and mobility in fuel cells : a solid-state NMR investigation(2010) Ghassemzadeh Khoshkroodi, Lida; Müller, Klaus (Prof. Dr.)It is generally believed that fuel cells will play an important role in energy technology already in the near future. Operating polymer electrolyte membrane fuel cells (PEMFCs) at temperatures higher than 100 °C and reduced humidity is anticipated to avoid most of the shortcomings associated with the low-temperature fuel cell operation, such as CO poisoning of the electrode catalysts, slow electrode kinetics of the oxygen reduction reaction and expensive water/thermal management. To date, the operation temperature of PEMFCs is limited to about 90 °C, and this limit is given by the properties of the perfluorosulfonic acid (PFSA) ionomer, Nafion, which is commonly used as a separator material. Apart from the proton conductivity decay at higher temperature and lower humidification, it is also the limited stability of Nafion preventing it from long term operation. Despite the high stability of the PTFE backbone in Nafion, severe deterioration is observed during fuel cell operation. Formation of pinholes and cracks, thinning of the membranes and decrease of ion exchange capacity were reported. The fluorine release indicated that the bond cleavage process takes place under fuel cell operating conditions. Bond cleavage was initially believed to proceed from radical attacks to the carboxyl groups terminating the PTFE backbone of Nafion, and it was claimed to be controlled by the endcapping of the polymer backbone with a CF3 group. However, the release of fluoride was reported even after endcapping of the materials. The observations proved that bond cleavage limits the stability of PFSA membranes, but the elementary reactions and consequences on the membrane microstructure are not fully understood yet. In this work, it has been tried to get new insights into the problems of long term stability of polymer electrolytes for low temperature fuel cells. The aim was to identify the changes in the chemical structure of the membrane after operating in a fuel cell. This understanding is essential for extending the operation limit of PFSA-type membranes by either improving the membrane properties or adjusting the conditions within the running fuel cell. In the present work, therefore the changes taking place in PFSA membranes after applying in-situ and ex-situ aging protocols have been investigated. While the in-situ experiments provide a global picture, the analysis of membranes after ex-situ tests, with various conditions, allows the separation of different types of reactions. In previous studies the degradation changes were mainly monitored by analyzing the released water of the fuel cell or by using the liquid ionomers. In this work with the help of solid-state NMR spectroscopy, the direct study of the chemical structure and dynamics of the polymer membranes before and after the degradation tests became possible. The structural changes in different parts of the PFSA membranes were first inspected after an in-situ aging test. These examined membranes (Nafion and Hyflon Ion) differed by the length of the side chains. The comparison of the solid-state 13C and 19F NMR data of polymers before and after the in-situ degradation test showed that changes can take place not only in the main chain of the polymer, but also within the polymer side chains, as reflected by changes of NMR signals associated with CFSO3, CF3, OCF2 and CF groups. The degree of degradation is found to decrease with increasing membrane thickness while for a given thickness the short side chain polymer, Hyflon Ion, appears to degrade less than Nafion. In order to understand the reason for these observations, a new ex-situ method has been developed to mimic the degradation of polymer electrolyte membranes in PEM fuel cells (caused by the cross-leakage of H2 and O2). In this ex-situ setup, it was possible to expose membranes to flows of different gases with controlled temperature and humidity. H+-form Nafion films with and without electrode layer (Pt) have been treated in the presence of different gases in order to simulate the anode and cathode side of a PEMFC. The changes of the chemical structure occurring during the degradation tests were primarily examined by solid-state 19F NMR spectroscopy. For completion, liquid-state NMR studies and ion exchange capacity measurements were performed. It was found that degradation occurs only when both H2 and O2 are present (condition of gas cross-leakage), and when the membrane is coated with Pt catalyst. The chemical degradation rate is found to be highest for H2-rich mixtures of H2 and O2, which corresponds to the conditions at the anode under OCV. It is further shown that side chain disintegration is very important for chemical degradation, although backbone decomposition also might take place. The fact that in-situ degradation effects were reproduced by the present ex-situ experiments, suggest that membrane degradation in a running fuel cell is mainly the consequence of chemical aging. Detecting the degradation for the membranes coated with Pt in the presence of both gases, H2 and O2, points toward the importance of radicals in the degradation process, which in a running fuel cell (in-situ conditions) may only form in the presence of some gas cross-over, allowing H2 and O2 to react at the Pt catalyst of the anode or cathode structure. Since the gas cross-over increases for the thinner Nafion membrane, these results indirectly explain the higher degradation rate of thin Nafion in the in-situ degradation test. The chemical degradation and stability of PFSA membranes against radical attacks was also investigated in a Fenton ex-situ degradation test. Liquid and solid-state NMR as well as ATR-FTIR spectroscopy were applied to the samples before and after the Fenton reaction. A Comparison of the degradation rate of Nafion and Hyflon Ion in the ex-situ Fenton test again proved that the Hyflon Ion membrane is more stable than Nafion. Comparing the degradation rate of the side chain in these two polymers showed that the stability of Hyflon Ion is mainly due to the shortening of the side chain in this polymer. Hence, the absence of one ether group and the tertiary carbon reduces the degradation rate of the side chain and makes this polymer less sensitive to the radical attacks than Nafion. For the performance of a membrane not only the chemical structure but also the polymer dynamics is important. Therefore the molecular mobility of the ionomer was investigated by variable temperature 19F NMR lineshape, T1 and T1ρ relaxation experiments. The decrease of the temperature dependent linewidth was explained by the reduction of static disorder in the Nafion membrane. From the relaxation data there was evidence for structural annealing, which is independent of the chemical degradation. Chemical degradation is considered to reduce the chain flexibility (i.e. the motional amplitudes), which may be explained by chain cross-linking and condensation reaction for the side chains. To overcome the problem of Nafion's low conductivity at temperatures above 100 °C and low relative humidity, also composite membranes were introduced. These membranes consist of Nafion modified by inorganic oxide additives. It has been reported that under dry conditions, these membranes show enhanced water uptake and water diffusion when compared with filler-free Nafion. In order to understand the reason for the better performance of these polymers, the impact of the oxide particles on the polymer dynamics has been investigated. [Nafion/(SiO2)x] composite membranes in the dry and wet state with x ranging from 0 to 15 w/w% were investigated by variable temperature solid-state 19F NMR spectroscopy. 19F T1 and T1ρ relaxation times and NMR lineshapes were analyzed in order to get details about the polymer mobility. It is concluded that solid oxide SiO2 particles play an important role in stabilizing the chemical structure and morphology of the polymer especially in the dry state. The filler particles lead to higher mobility of polymer chains, if the filler content has an optimized value of about 9 w/w%. The results were further supported by comparing the sideband intensity as well as the linewidth in 19F NMR and recording the 19F{1H} CP/MAS NMR spectra. Furthermore, it has been shown that the structure of composite membranes is more stable after dehydration and possible condensation reactions are less likely in these membranes. The presence of filler particles decrease the chance for morphology changes and close packing of polymer chains in the dry state. Also the decrease of ionic exchange capacity after dehydration is less severe for the composite membrane as compared to filler-free Nafion. In conclusion, the present results provide a complete picture of solid membrane before and after degradation and of possible mechanisms for radical formation and radical attacks to the polymer. In addition, it is shown which changes can occur in the morphology of polymer chains in low humidification and high temperature. Some general suggestions for the better performance of polymer electrolyte membrane are therefore: For improving the performance of polymer electrode membrane, the sources for the radical formation in the fuel cell should be controlled. This can be possible to some extend by avoiding the use of iron end plates in the fuel cells. Also the chance for the gas crossover through the membrane should be decreased. Thicker membranes show less gas cross-over. By taking into account the higher resistivity of thicker membranes, an optimized membrane thickness should be selected. Hydrocarbon sulfonated polyetherketones possess narrower hydrophilic channels which significantly reduce electroosmotic drag, water permeation as well as gas cross-over. Also the short side chain perfluorinated polymer, Hyflon Ion, with lower electroosmotic drag of water should possess a reduced gas cross-over though the membrane. The more efficient way for decreasing degradation is to use membranes which are stable against radical attacks. At this point the perfluorinated polymers are still the best available membranes. Endcapping of the backbone in these polymers and decreasing the concentration of reactive end groups like COOH during the polymer manufacturing process can significantly decrease degradation. To minimize degradation of the side chains in perfluorinated polymers, short side chain polymers are suggested because of less reactive groups for the radical attacks and higher concentration of acidic groups. When higher operation temperatures are required, composite Nafion membranes might be used. The higher stability of these membranes makes them advantageous for operating at evaluated temperatures and low relative humidity. The novel results from the present work lead to a better understanding of membrane degradation, which still represents a serious problem for fuel cells under operation conditions, and provide important indications for future developments of membranes with improved performance for alternative energy conversion devices.