Universität Stuttgart
Permanent URI for this communityhttps://elib.uni-stuttgart.de/handle/11682/1
Browse
62 results
Search Results
Item Open Access Mining Java packages for developer profiles : an exploratory study(2017) Ramadani, Jasmin; Wagner, StefanItem Open Access Empirical research plan: effects of sketching on program comprehension(2016) Baltes, Sebastian; Wagner, StefanSketching is an important means of communication in software engineering practice. Yet, there is little research investigating the use of sketches. We want to contribute a better understanding of sketching, in particular its use during program comprehension. We propose a controlled experiment to investigate the effectiveness and efficiency of program comprehension with the support of sketches as well as what sketches are used in what way.Item Open Access A comprehensive safety engineering approach for software-intensive systems based on STPA(2015) Abdulkhaleq, Asim; Wagner, Stefan; Leveson, NancyFormal verification and testing are complementary approaches which are used in the development process to verify the functional correctness of software. However, the correctness of software cannot ensure the safe operation of safety-critical software systems. The software must be verified against its safety requirements which are identified by safety analysis, to ensure that potential hazardous causes cannot occur. The complexity of software makes defining appropriate software safety requirements with traditional safety analysis techniques difficult. STPA (Systems-Theoretic Processes Analysis) is a unique safety analysis approach that has been developed to identify system hazards, including the software-related hazards. This paper presents a comprehensive safety engineering approach based on STPA, including software testing and model checking approaches for the purpose of developing safe software. The proposed approach can be embedded within a defined software engineering process or applied to existing software systems, allow software and safety engineers integrate the analysis of software risks with their verification. The application of the proposed approach is illustrated with an automotive software controller.Item Open Access Assessing iterative practical software engineering courses with play money(2016) Mindermann, Kai; Ostberg, Jan-Peter; Wagner, StefanChanging our practical software engineering course from the previous waterfall model to a more agile and iterative approach created more severe assessment challenges. To cope with them we added an assessment concept based on play money. The concept not only includes weekly expenses to simulate real running costs but also investments, which correspond to assessment results of the submissions. This concept simulates a startup-like working environment and its financing in an university course. Our early evaluation shows that the combination of the iterative approach and the play money investments is motivating for many students. At this point we think that the combined approach has advantages from both the supervising and the students point of view. We planned more evaluations to better understand all its effects.Item Open Access Scrum for cyber-physical systems: a process proposal(2014) Wagner, StefanAgile development processes and especially Scrum are chang- ing the state of the practice in software development. Many companies in the classical IT sector have adopted them to successfully tackle various challenges from the rapidly changing environments and increasingly complex software systems. Companies developing software for embedded or cyber-physical systems, however, are still hesitant to adopt such processes. Despite successful applications of Scrum and other agile methods for cyber-physical systems, there is still no complete process that maps their specific challenges to practices in Scrum. We propose to fill this gap by treating all design artefacts in such a development in the same way: In software development, the final design is already the product, in hardware and mechanics it is the starting point of production. We sketch the Scrum extension Scrum CPS by showing how Scrum could be used to develop all design artefacts for a cyber physical system. Hardware and mechanical parts that might not be available yet are simulated. With this approach, we can directly and iteratively build the final software and produce detailed models for the hardware and mechanics production in parallel. We plan to further detail Scrum CPS and apply it first in a series of student projects to gather more experience before testing it in an industrial case study.Item Open Access On the impact of service-oriented patterns on software evolvability: a controlled experiment and metric-based analysis(2019) Bogner, Justus; Wagner, Stefan; Zimmermann, AlfredBackground: Design patterns are supposed to improve various quality attributes of software systems. However, there is controversial quantitative evidence of this impact. Especially for younger paradigms such as service- and Microservice-based systems, there is a lack of empirical studies. Objective: In this study, we focused on the effect of four service-based patterns - namely Process Abstraction, Service Façade, Decomposed Capability, and Event-Driven Messaging - on the evolvability of a system from the viewpoint of inexperienced developers. Method: We conducted a controlled experiment with Bachelor students (N = 69). Two functionally equivalent versions of a service-based web shop - one with patterns (treatment group), one without (control group) - had to be changed and extended in three tasks. We measured evolvability by the effectiveness and efficiency of the participants in these tasks. Additionally, we compared both system versions with nine structural maintainability metrics for size, granularity, complexity, cohesion, and coupling. Results: Both experiment groups were able to complete a similar number of tasks within the allowed 90 min. Median effectiveness was 1/3. Mean efficiency was 12% higher in the treatment group, but this difference was not statistically significant. Only for the third task, we found statistical support for accepting the alternative hypothesis that the pattern version led to higher efficiency. In the metric analysis, the pattern version had worse measurements for size and granularity while simultaneously having slightly better values for coupling metrics. Complexity and cohesion were not impacted. Interpretation: For the experiment, our analysis suggests that the difference in efficiency is stronger with more experienced participants and increased from task to task. With respect to the metrics, the patterns introduce additional volume in the system, but also seem to decrease coupling in some areas. Conclusions: Overall, there was no clear evidence for a decisive positive effect of using service-based patterns, neither for the student experiment nor for the metric analysis. This effect might only be visible in an experiment setting with higher initial effort to understand the system or with more experienced developers.Item Open Access The Quamoco product quality modelling and assessment approach(2012) Wagner, Stefan; Lochmann, Klaus; Heinemann, Lars; Kläs, Michael; Trendowicz, Adam; Plösch, Reinhold; Seidl, Andreas; Goeb, Andreas; Streit, JonathanPublished software quality models either provide abstract quality attributes or concrete quality assessments. There are no models that seamlessly integrate both aspects. In the project Quamoco, we built a comprehensive approach with the aim to close this gap. For this, we developed in several iterations a meta quality model specifying general concepts, a quality base model covering the most important quality factors and a quality assessment approach. The meta model introduces the new concept of a product factor, which bridges the gap between concrete measurements and abstract quality aspects. Product factors have measures and instruments to operationalise quality by measurements from manual inspection and tool analysis. The base model uses the ISO 25010 quality attributes, which we refine by 200 factors and 600 measures for Java and C# systems. We found in several empirical validations that the assessment results fit to the expectations of experts for the corresponding systems. The empirical analyses also showed that several of the correlations are statistically significant and that the maintainability part of the base model has the highest correlation, which fits to the fact that this part is the most comprehensive. Although we still see room for extending and improving the base model, it shows a high correspondence with expert opinions and hence is able to form the basis for repeatable and understandable quality assessments in practice.Item Open Access XSTAMPP: An eXtensible STAMP platform as tool support for safety engineering(2015) Abdulkhaleq, Asim; Wagner, StefanSTPA (Systems-Theoretic Processes Analysis) is a new hazard analysis technique based on STAMP. STPA is already being used in different industrial domains (e.g. space, aviation, medical or automotive). To support the application of STPA and make using STPA more efficient, we developed an open tool called A-STPA. However, the current usage of ASTPA by safety analysts in different areas shows a number of shortcomings in terms of documenting unsafe control actions, drawing different levels of control structure diagrams, documenting the causal factors in STPA Step 2 and supporting the application of STPA in different areas. In this paper, we present an extensible STAMP platform called XSTAMPP as tool support designed specifically to serve the widespread adoption and use of STPA in different areas, to facilitate STPA application to different systems and to be easily extended to include different requirements and features. Moreover, XSTAMPP has the potential to be extended in the future to support the application of CAST for accident analysis. We believe that XSTAMPP is a useful first step toward establishing a base platform to support the application of STAMP methodologies in different domains.Item Open Access An empirical study on changing leadership in agile teams(2021) Spiegler, Simone V.; Heinecke, Christoph; Wagner, StefanAn increasing number of companies aim to enable their development teams to work in an agile manner. When introducing agile teams, companies face several challenges. This paper explores the kind of leadership needed to support teams to work in an agile way. One theoretical agile leadership concept describes a Scrum Master who is supposed to empower the team to lead itself. Empirical findings on such a leadership role are controversial. We still have not understood how leadership unfolds in a team that is by definition self-organizing. Further exploration is needed to better understand leadership in agile teams. Our goal is to explore how leadership changes while the team matures using the example of the Scrum Master. Through a grounded theory study containing 75 practitioners from 11 divisions at the Robert Bosch GmbH we identified a set of nine leadership roles that are transferred from the Scrum Master to the Development Team while it matures. We uncovered that a leadership gap and a supportive internal team climate are enablers of the role transfer process, whereas role conflicts may diminish the role transfer. To make the Scrum Master change in a mature team, team members need to receive trust and freedom to take on a leadership role which was previously filled by the Scrum Master. We conclude with practical implications for managers, Product Owners, Development Teams and Scrum Masters which they can apply in real settings.Item Open Access Evaluate and control service and transaction dependability of complex IoT systems(2021) Niedermaier, Sina; Zelenik, Thommy; Heisse, Stefan; Wagner, StefanObserving and controlling the dependability of service provision of complex IoT systems is challenging. In practice, many organizations struggle to derive consumer needs related to quality and to observe and quantify the service provision in the context of the dynamic behavior of a complex distributed system. In this paper, we present an approach to define and evaluate the dependability of complex IoT systems. Our approach is an adaptation of the ISO/IEC 25040, an international standard for the evaluation process for system and software quality, which is part of the systems and software quality requirements and evaluation (SQuaRE) series. Our approach was designed and evaluated with action research in an industrial study at Robert Bosch GmbH. Based on the framework of the SQuaRE series, we integrated different elements of site reliability engineering (SRE) and combined them with distributed tracing as a promising measurement method. Our approach introduces the IoT transaction concept to reduce modeling and observation efforts while increasing operationalization to measure performance against dependability targets. Our adaption was effectively applied, consumer-centricity along different system stakeholders were enhanced, and negative consequences of organizational silos were reduced. This has improved the dependability evaluation of service provision to enable fast feedback cycles for service performance control and improvement.