Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen:
http://dx.doi.org/10.18419/opus-12910
Autor(en): | Maucher, Clemens Teich, Heiko Möhring, Hans-Christian |
Titel: | Improving machinability of additively manufactured components with selectively weakened material |
Erscheinungsdatum: | 2021 |
Dokumentart: | Zeitschriftenartikel |
Seiten: | 535-544 |
Erschienen in: | Production engineering 15 (2021), S. 535-544 |
URI: | http://nbn-resolving.de/urn:nbn:de:bsz:93-opus-ds-129291 http://elib.uni-stuttgart.de/handle/11682/12929 http://dx.doi.org/10.18419/opus-12910 |
ISSN: | 0944-6524 1863-7353 |
Zusammenfassung: | Part design and the possibilities of production are disrupted by the increased usage of additive manufacturing (AM). Featuring excellent creative freedom due to the layer-by-layer buildup of components, AM leads to profound changes in future part design and enables previously impossible geometries. Laser powder bed fusion (LPBF) technology already allows to manufacture small quantities of parts with high productivity and material efficiency. Due to the specific process characteristics, the resulting surface finish of these parts is insufficient for a wide range of applications, and post-processing is usually unavoidable. Specifically for functional surfaces, this post-processing is often done by machining processes, which can pose challenges for intricate and complex AM parts due to excessive machining forces. In the present paper, the influence and the possibilities of the LPBF process parameters on the subtractive post-processing are shown. A novel weakened structure is developed to selectively reduce the strength of the material and improve the cutting conditions. Chip formation, cutting forces and vibrations during drilling as well as cutting forces during an orthogonal cut are examined. To quantify the differences, a comparison of the machinability between bulk material, standard support structures and the weakened structure is carried out. |
Enthalten in den Sammlungen: | 07 Fakultät Konstruktions-, Produktions- und Fahrzeugtechnik |
Dateien zu dieser Ressource:
Datei | Beschreibung | Größe | Format | |
---|---|---|---|---|
s11740-021-01038-2.pdf | 1,97 MB | Adobe PDF | Öffnen/Anzeigen |
Diese Ressource wurde unter folgender Copyright-Bestimmung veröffentlicht: Lizenz von Creative Commons