Please use this identifier to cite or link to this item:
http://dx.doi.org/10.18419/opus-14529
Authors: | Gorke, Oliver Stuhlmüller, Marc Tovar, Günter E. M. Southan, Alexander |
Title: | Unravelling parameter interactions in calcium alginate/polyacrylamide double network hydrogels using a design of experiments approach for the optimization of mechanical properties |
Issue Date: | 2024 |
metadata.ubs.publikation.typ: | Zeitschriftenartikel |
metadata.ubs.publikation.seiten: | 2851-2859 |
metadata.ubs.publikation.source: | Materials advances 5 (2024), S. 2851-2859 |
URI: | http://nbn-resolving.de/urn:nbn:de:bsz:93-opus-ds-145485 http://elib.uni-stuttgart.de/handle/11682/14548 http://dx.doi.org/10.18419/opus-14529 |
ISSN: | 2633-5409 |
Abstract: | Calcium alginate/polyacrylamide double network hydrogels were reported to be exceptionally tough. However, literature reports so far varied the sample compositions mainly by one parameter at a time approaches, thus only drawing an incomplete picture of achievable material properties. In this contribution, sample compositions are varied according to a face-centered central composite experimental design taking into account the four parameters of alginate concentration cAlg, high/low molar mass alginate mixing ratio RP, acrylamide concentration cAAm, and N,N′-methylenebisacrylamide concentration cMBA. Each sample composition is investigated in triplicate. Thus, 75 samples were investigated by tensile testing, and a detailed analysis of the significant parameters and parameter interactions influencing the mechanical properties is conducted. The data shows that two parameter interactions, involving all four tested parameters, have a large effect on the Young's modulus, the strength, the toughness and the strain at material failure. As a consequence, it becomes evident that the experimental procedure from previous studies did not always result in optimum sample compositions. The results allow optimization of the mechanical properties within the studied parameter space, and a new maximum value of the strength of 710 kPa is reported. The data also give rise to the assumption that other parameters and parameter interactions ignored also in this study may allow further tailoring of mechanical properties. |
Appears in Collections: | 04 Fakultät Energie-, Verfahrens- und Biotechnik |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
D3MA00740E.pdf | 1,11 MB | Adobe PDF | View/Open |
This item is licensed under a Creative Commons License